| 2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | ABS 500 x 400 x 2,0 mm (white) |
| 1 x | ABS 500 x 400 x 1 mm (white) |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | Buy Perforated film 100 cm / 20 m |
| 1 x | ABS 500 x 400 x 0,5 mm (white) |
| 1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | Aluminium sheet 500x250x0,5mm |
| 2 x | Buy Perforated film 100 cm / 10 m |
| 2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | Carbon fibre sandwich sheet 350x150x3 mm |
| 1 x | ABS 500 x 400 x 1,5 mm (white) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
| 1 x | Buy Perforated film 100 cm / 50 m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
| 1 x | Optical RPM Sensor |
| 1 x | Lock washer 3.2 mm (20 pcs) |
| 2 x | Circlik for shaft 1.2 mm (10 pcs) |
| 1 x | Quicklock washer 4 mm (10 pcs) |
| 1 x | 1/10 Pilot "Jimmy" |
| 2 x | Spring lock washer 2.1 mm (20 pcs) |
| 1 x | M3-M4 rubber washer (8 pcs) |
| 1 x | 1/6 Pilot "John" |
| 1 x | Aluminium wide washer M4 Red (4 pcs) |
| 1 x | Pilot "Goose" (Slimline) |
| 1 x | Spring lock washer 3.1 mm (20 pcs) |
| 1 x | Lock washer 4.3 mm (20 pcs) |
| 1 x | 1/6 Pilot "Buddy" |
| 1 x | 1/10 Pilot "Jack" |
| 1 x | Lock washer 2.2 mm (20 pcs) |
| 1 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
| 1 x | Aluminium wide washer M3 red (4 pcs) |
| 1 x | Flat washer 1.7 mm (20 pcs) |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 4 x | BALSA triangular 15x15x1000 mm |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | Extractor piñones 2.3/3.2 mm |
| 2 x | BALSA leading edge 8x10x1000 mm |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | Pine wood slat 5.0x5.0x1000 mm |
| 2 x | Beech dowels 4.0 x 1000 mm |
| 2 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 2 x | BALSA triangular 10x10x1000 mm |
| 1 x | Liston HAYA 3 x 10 x 1000 mm |
| 2 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 2 x | Beech dowels 2.0 x 1000 mm |
| 1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
| 2 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
| 1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
| 1 x | Peel ply 64 g/m² (plain weave) 150 cm x 20m |
| 1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m |
| 1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
| 1 x | Conector XT-30 (macho) |
| 1 x | Buy Perforated film 145 cm / 50 m |
| 2 x | DYNAMOMETER S-1580 |
| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Tapping Screw M2.9x9.5 (10 pcs) |
| 1 x | Screw M3x30 (10 pcs) |
| 2 x | Socket Head Screw M2x8 |
| 1 x | Threaded insert M3 (4 pcs) |
| 2 x | Titanium M3x0,5x8 mm Flat Head screw (4 pcs) |
| 1 x | Socket Head Screw M2x12 |
| 1 x | Tornillo cabeza boton M4x12 mm (5 pcs) |
| 1 x | A/C quality beech plywood 1520x750x3.0 mm |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Servo M2x5/16 screw (4 pcs) |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 2 x | Socket Head Screw M2x10 |
| 1 x | Socket Screw M3x9 mm |
| 1 x | Tapping Screw M2.2x9.5 (10 pcs) |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | Propeller balancer |
| 1 x | Vest clothes Hispano Aviación |
| 1 x | Spring pin Ø 1 x 6 mm (10 pcs) |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | Titanium M3x0,5x6 mm Flat Head screw (4 pcs) |
| 1 x | Tapping Screw M2.2x65 (10 pcs) |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | Titanium M3x0,5x12 mm Flat Head screw (4 pcs) |
| 1 x | A/C economy plywood 600x300x6+.0 mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Field folding model stand SebArt |
| 1 x | Propeller balancer |
| 1 x | Disposable Injector Bags (30x16cm) 100 pcs |
| 1 x | 3,0x60 mm allen screwdriver |
| 1 x | Starter EM Gear Power 250 |
| 1 x | |
| 1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
| 1 x | Screwdriver for Hexagon 1,5mm |
| 1 x | Z Bender - S Type Tool |
| 1 x | Vacuum pump P1-N |
| 1 x | Crimping tool |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
| 1 x | Crimping tool |
| 1 x | Starter 12v (Max 180 and 30ccm) |
| 1 x | Dust collector for mould cleaning |
| 1 x | 1,5x50 mm allen screwdriver |
| 1 x | 2,5x60 mm allen screwdriver |
| 1 x | Hot Glue Stick GREEN |
| 1 x | Starter Sullivan-STAR 603 DINATRON |
| 1 x | Vacuum pump 12 CFM |
| 1 x | Z Bender - S Type Tool |
| 1 x | Hot Glue Stick BLACK |
| 1 x | Starter Sullivan-STAR 601 |
| 1 x | 2,0x50 mm allen screwdriver |
| 1 x | Screwdriver for Torx® TX6 |
| 1 x | Copier 5x20 cm pcs |
| 1 x | Digital precision scale up to 2000 g |
| 1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
| 1 x | Screw M4x30 (10 pcs) |
| 1 x | Circlik for shaft 2.3 mm (10 pcs) |
| 1 x | DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch |
| 1 x | M3 black washers (4 pcs) |
| 1 x | Balsa panel 1.5x100x1000 mm |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
| 1 x | OPTOTRONIX Aurora LCU |
| 1 x | Screw M2.5x5 (10 pcs) |
| 1 x | Socket Screw M2x3 mm (4 pcs) |
| 1 x | DPSI LR-S (with push buttons) |
| 1 x | Charger GensAce IMARS Dual Channel AC200W/DC300Wx2 |
 |
| 7,442.26EUR |
under request
few units
temporarily out of stock
