2 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
2 x | Carbon fiber rod 7.0 mmx1000 mm |
2 x | Carbon fiber rod 10 mm x 1000 mm |
2 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
2 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
2 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | |
1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
2 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | SE Ring 360 mm (2 pcs) |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | 20x200 mm battery rings |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
2 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | SE Ring 400 mm (2 pcs) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | SE Ring 330 mm (4 pcs) |
1 x | Extractor piñones 2.3/3.2 mm |
1 x | 800TVL CMOS camera for FPV |
1 x | Big Crow DLE-170M |
1 x | Motor DLE 430 cc - Paramotors |
1 x | Motor DLE 200cc Std |
1 x | Medidor ángulos y/o incidencias |
1 x | Propeller balancer |
1 x | Angle measurer |
1 x | Field folding model stand |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Field folding model stand SebArt |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | A/C quality beech plywood 498x247x2.0 mm |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | BALSA trip 10x10x1000 mm |
1 x | A/C quality beech plywood 600x300x8.0 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | Balsa panel 8.0x100x1000 mm |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | BALSA trip 5.0x5.0x1000 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Presto SF Light Filler styrene-free (420 g) |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | 3,2x1000 mm 2:1 red termoretract tube |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | Canopy Latch |
1 x | 100 mm rods + T patellas set for direction control |
1 x | Strip 3,5x1,75x330 mm |
1 x | Buy Perforated film 100 cm / 20 m |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
2 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Birch plywood plate 600x300x2.5 mm |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Straightened threaded rod M2-1m |
2 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
|
9,387.05EUR |