| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 2 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
| 1 x | U Profile ABS 3,0x6,0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
| 1 x | ABS "T" angle 2.0x2.0x1000 mm |
| 1 x | L-Connector 4.0 mm x 1000 mm |
| 1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | U Profile ABS 8,0x4,0x1000 mm |
| 1 x | ABS "T" angle 10.0x10.0x1000 mm |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | ABS angle 1.5x1.5x1000 mm |
| 2 x | Locking cable tie 4.6x203 (uds) |
| 1 x | ABS "T" angle 8.0x8.0x1000 mm |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | One touch canopy lock |
| 1 x | Profile ABS half cane 2.5x1000 mm |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | U Profile ABS 2,0x4,0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | T-Connector 4.0 mm x 1000 mm |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | ABS angle 4,0x4,0x1000 mm |
| 3 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | U Profile ABS 1,0x2,0x1000 mm |
| 1 x | Profile ABS Square 3 x 1000 mm |
| 1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
| 1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
| 1 x | L-Connector 1.0 mm x 1000 mm |
| 2 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 1 x | ABS "T" angle 4.0x4.0x1000 mm |
| 1 x | ABS angle 6,0x6,0x1000 mm |
| 1 x | ABS angle 3,0x3,0x1000 mm |
| 1 x | Profile ABS half cane 2.0x1000 mm |
| 1 x | Covered closure or fairings |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
| 1 x | ABS "T" angle 6.0x6.0x1000 mm |
| 1 x | Canopy Latch |
| 2 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 1 x | Screw-lock connector M2 (2 uds) |
| 1 x | SUS wire 3m (nylon coated) |
| 1 x | U Profile ABS 5,0x10,0x1000 mm |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | 20x1000 mm Ring Strap Back To Back |
| 1 x | Tape GFK 50 mm |
| 1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
| 1 x | 1/6 Pilot "Tony" |
| 1 x | Civilian pilot "Curt" size 9cm (Slimline) |
| 1 x | Pilot "Dick" Legends Series (Slimline) |
| 2 x | Pilot JAN 1/4 Saiplanes |
| 1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
| 1 x | Pilot "Duke" Legends Series (Slimline) |
| 1 x | Threaded coupler M3 (10 uds) |
| 1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
| 1 x | Ball link duraluminium M3 V1 (10 pcs) |
| 2 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
| 1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 2 x | Z type of cable coupler Ø 1 (2 uds) |
| 1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
| 1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
| 1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
| 1 x | Threaded coupler M2 (10 uds) |
| 1 x | Ball Link ALU M3 - RH (1 pcs) |
| 1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
| 1 x | Aluminium blue ball links M3 V1 (10 pcs) |
| 1 x | Couple M4 for wire (10 pcs) |
| 1 x | Kwik link AL M3 con Clip (2 pcs) |
| 1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
| 2 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
| 1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
| 1 x | Ball link Aluminio M3 (2 pcs) |
| 1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
| 1 x | Ball link V1 Ø7 M4/3 (6 uds) |
| 1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
| 1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
| 1 x | Carbon fiber rod 2.5 mmx1000 mm |
| 2 x | Carbon fiber flat 1000x3.0x0.5 mm |
| 1 x | Carbon fiber rod 5.0 mmx1000 mm |
| 1 x | Carbon fiber rod 1.5 mm x 2000 mm |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 2 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 2 x | Carbon fiber rod 1.0 mm x 1000 mm |
| 1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
| 1 x | Carbon fiber rod 20 mmx1000 mm |
| 1 x | Horn 20x28,5 mm (2 pcs) |
| 1 x | Set cintas unión paracaídas 145 cm |
| 1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
| 1 x | Snap pin for micro clevis (10 uds) |
| 1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
| 1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 1 x | Allen wheel collar M4x6 |
| 1 x | Snap long M2 (10 uds) |
| 1 x | Wheel collar 3 mm Ø (4 uds) |
| 1 x | Profile ABS half cane 4x1000 mm |
| 1 x | Cross Connector 4.0 mm x 1000 mm |
| 2 x | Carbon fiber flat 1000x6.0x0.8 mm |
| 1 x | ABS angle 10,0x10,0x1000 mm |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
| 2 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | Carbon plate 350x150x1.0 mm |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 1 x | 1/6 Pilot "Buddy" |
| 1 x | Civilian pilot "Joe" size 9cm (Slimline) |
| 1 x | Piloto Jet "Green" 1/6 Scale |
| 1 x | 1/12 Pilot "Langley" |
| 1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
| 1 x | Sandpaper file 13 mm |
| 1 x | Fresa corte diamante Ø 1.4mm (bola) |
| 1 x | 2,5x60 mm allen screwdriver |
| 1 x | 25 mm Sandpaper file |
| 1 x | Male connector for 6 pines AWG |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | Spinner Alumin. fixed propeller 50 mm / 5,0 mm |
| 1 x | Spinner INOVA 102 mm Black |
| 1 x | 1/12 Pilot "Fighter" |
| 1 x | Pilot "Adolf" Legends Series (Slimline) |
| 1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
| 1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
| 1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
| 1 x | Micro clevis (10 uds) |
| 1 x | Rubber bushing with bracket "B" type (2 pcs) |
| 1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
| 1 x | Pulley brass 10/2 (2 pcs) |
| 1 x | Pulley brass 16/2 (2 pcs) |
| 1 x | wire tensioner (red) |
| 1 x | Z type of cable coupler Ø 1.8 (2 uds) |
| 2 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | Kwik link AL M4 con Clip (2 pcs) |
| 1 x | Angled clevis with threaded rod M3 |
| 1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
| 1 x | Carbon fiber rod 4.0 mmx1000 mm |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
| 1 x | Black large kwik link (10 pcs) |
| 1 x | Carbon fiber rod 7.0 mmx1000 mm |
| 1 x | ESC ALPHA 60A HV |
| 1 x | Vest clothes Hispano Aviación |
| 1 x | Cap Hispano Aviación |
| 1 x | Softshell Hispano Aviación |
| 1 x | Sealing Iron Sleeve STD |
| 1 x | Ø 1,6 mm pin for Kwik link MPJ2150/2157 (6 pcs) |
| 1 x | Spinner INO 51 mm Chrome (Imitacion metal) |
| 1 x | F3A carbon 80 mm spinner for Spark EVO |
| 1 x | Connector Sub-D 2+5 Male |
| 1 x | Battery charging cable XT60 |
| 1 x | BEC 3A FOXY |
| 1 x | Extension 6 lipos XH > EH |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | USB Interface REVOLECTRIX for CellPRO 10s |
| 1 x | Multi-adapter balancer JST - TP |
| 1 x | CM-3 |
| 1 x | Spinner INO 75 mm Chrome (Imitacion metal) |
| 1 x | Propeller 8x4 Electric |
| 1 x | Pilot "Goose" (Slimline) |
| 1 x | Set clevis for pull-pull (TY13233 & TY13234) |
| 1 x | Turnbuckle M2,5x32/48 (2pcs) |
| 1 x | Cooler motor type 280 |
| 1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
| 1 x | Crystal Universal RX 35.040 Ch 64 |
| 1 x | Carbon fiber rod 12 mm x 1000 mm |
| 1 x | TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible |
| 2 x | Porta Kwik link M4 4 mm (2 pcs) |
| 1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
| 1 x | Pulley brass 12/2 (2 pcs) |
| 1 x | Pulley brass 8/2 (2 pcs) |
| 1 x | Pulley brass 2,5/1 (2 pcs) |
| 1 x | Porta Kwik link M4 3 mm (2 pcs) |
| 1 x | Pulley brass 14/2 (2 pcs) |
| 1 x | Kwik link with arm M3xM2xL24 |
| 1 x | Pulley brass 5/1,5 (2 pcs) |
| 1 x | BETA 1400 ARF Red |
| 1 x | BETA 1400 RTF Red |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | Cabel charger transmitter GRAUPNER |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | Three-position switched channel, short |
| 1 x | Adapter lead MPX/EC3 |
| 1 x | Multi-adapter balancer JST/C - TP |
| 1 x | Short Switch On/Off micro |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | Male connector for 12 pines AWG |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | DPSI Ampere battery backer |
| 1 x | Opto Gas Engine Kill Switch |
| 1 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
| 1 x | Female connector for 12 pines AWG |
| 1 x | Extension 5 lipos JST/C |
| 1 x | Micro Switch button |
| 1 x | EWC3 40 cm wing connector |
 |
| 3,671.29EUR |
