| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Carbon fiber rod 3.0 mm x 1000 mm |
| 2 x | Carbon fiber rod 12 mm x 1000 mm |
| 1 x | Carbon fiber rod 7.0 mmx1000 mm |
| 1 x | Carbon fiber flat 1000x3.0x0.5 mm |
| 1 x | Squared carbon wing joinner 5x5x220 mm |
| 1 x | Carbon fiber rod 2.5 mmx1000 mm |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 2 x | Carbon fiber rod 20 mmx1000 mm |
| 1 x | Carbon fiber rod 5.0 mmx1000 mm |
| 1 x | Carbon fiber flat 1000x3.0x0.13 mm |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Carbon fiber rod 10 mm x 1000 mm |
| 1 x | Screwdriver for Hexagon 1,5mm |
| 1 x | 1,5x50 mm allen screwdriver |
| 1 x | 3,0x60 mm allen screwdriver |
| 1 x | Vacuum pump P1-N |
| 1 x | Crimping tool |
| 1 x | Screwdriver for Torx® TX8 |
| 1 x | Ball Link Plier |
| 1 x | Screwdriver for Hexagon 1,27mm |
| 1 x | Hot Glue Stick RED |
| 1 x | Cut tube |
| 1 x | Digital precision scale up to 2000 g |
| 1 x | |
| 1 x | Digital scale up to 40 kg |
| 1 x | Z Bender - S Type Tool |
| 1 x | Hexagonal ball head 2.0 x 50 mm |
| 1 x | Starter 12v (Max 180 and 30ccm) |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
| 1 x | Starter EM Gear Power 250 |
| 1 x | Hot Glue Stick BLACK |
| 1 x | Dust collector for mould cleaning |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 1 x | 2,5x60 mm allen screwdriver |
| 1 x | |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
| 1 x | CC 03 |
| 1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Circlick securite |
| 1 x | BEC 3A FOXY |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | 30 cm BEC cable (male) |
| 1 x | Cabel charger transmitter GRAUPNER |
| 1 x | 30 cm BEC cable (female) |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
| 1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | CC 02 |
| 1 x | USB HLS prog. interface |
| 1 x | MPX-Dean "T" Adapter |
| 1 x | CM-3 |
| 2 x | CC 01 |
| 1 x | Adapter lead MPX/EC3 |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | JETImodel SINGLE BEC |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 2 x | TP/TopFuel - XH 2/3S Adapter |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 2 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | Covered closure or fairings |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Screw-lock connector M2 (2 uds) |
| 1 x | One touch canopy lock |
| 1 x | SE Ring 480 mm (2 pcs) |
| 1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | 20x200 mm battery rings |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | SE Ring 400 mm (2 pcs) |
| 1 x | SE Ring 300 mm (2 pcs) |
| 1 x | SE Ring 240 mm (2 pcs) |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 2 x | SE Ring 330 mm (4 pcs) |
| 1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
| 1 x | |
| 1 x | Tape GFK 25 mm |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | Ring 320 mm length (5 pcs) |
| 2 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
| 1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 2 x | Marker ties (20 pcs) |
| 1 x | SE Ring 360 mm (2 pcs) |
| 1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
| 1 x | SE Ring 200 mm (2 pcs) |
| 1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | SERVO HOLDER |
| 1 x | Adjustable launching hook |
| 2 x | 800TVL CMOS camera for FPV |
| 1 x | Tow hook for tug |
| 1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
| 1 x | Jeti Black cap |
| 1 x | ABS tube 8.0x6.0x1000 mm |
| 1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 1 x | Cable S.BUS 3 salidas 100 mm |
| 1 x | |
| 1 x | Ply-Span 450x600/13g Orange |
| 1 x | ABS Strip 1.0x4.0x1000 mm |
| 1 x | ABS angle 10,0x10,0x1000 mm |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | Carbon fiber rod 6.0 mmx1000 mm |
| 1 x | Carbon fiber rod 14 mmx1000 mm |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | Extension 5 lipos JST - JST/C |
| 1 x | PSC 5 |
| 1 x | MAX BEC |
| 1 x | Long Switch On/Off micro |
| 1 x | SBEC Jeti |
| 1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
| 1 x | Interruptor SPS 70v 60/120A |
| 1 x | Multi-adapter balancer JST/C - TP |
| 1 x | USB Mini Camera endoscope |
| 1 x | Aero-Master (Aero-naut) |
| 1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
| 1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
| 1 x | Pushrod octagone 3/2 with coupler M2 |
| 1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Pushrod octagone 4/3 |
| 2 x | 38x4,5 mm wires output (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | Pushrod octagone 4/3 with coupler M3 |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 2 x | Cockpit plastic closing |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 1 x | Wheel collar 2 mm Ø (4 uds) |
| 1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
| 1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
| 1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
| 1 x | Pushrod octagone 3/2 |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | Fully Threaded Steel Rod M3 |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 2 x | 28x5 mm wires output (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
| 1 x | Tip wing protector 28x10x12 (2 pcs) |
| 1 x | Pushrod greyline 3/2 with coupler M2 |
| 1 x | Bec MR UBEC 5A (5v/6v/7v) |
| 1 x | Control for forward wheel (MINI) |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Cable grommet Ø 3.2 mm (4 uds) |
| 1 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
| 1 x | DA 70 Twin Gas Engine |
| 1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
| 1 x | Motor DA 100L |
| 1 x | Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
| 1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
| 1 x | Fiberglass tube 6/4x1000mm |
| 1 x | Motor DA 60 |
| 1 x | Motor DA 50-R |
| 1 x | Motor DA 150 |
| 1 x | Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | 6 mm red aluminium threaded horn with patella |
| 1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
| 1 x | Cable grommet Ø 4 mm (4 uds) |
| 1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 1 x | Allen wheel collar M4x4 |
| 1 x | Split pin 1x8 mm (10 uds) |
| 1 x | Tip wing protector 30x10 (2 pcs) |
| 1 x | VBar Control Touch, midnight black |
| 1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
| 1 x | VBar NEO VLink 6.x Express, neon-yellow |
| 2 x | Cinta Goldfix 1m |
| 3 x | SE Ring 350 mm (2 pcs) |
| 2 x | SE Ring HACKER 300 mm (2 pcs) |
| 1 x | 20x1000 mm Ring Strap Back To Back |
| 1 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
| 1 x | Tirpiz Battleship 1:200 |
| 1 x | Dumper propeller 6/8 mm |
| 1 x | Propeller Pleg CAM Carbon 10x7 |
| 1 x | Propeller Pleg CAM Carbon 14x7 |
| 1 x | Propeller Pleg CAM Carbon 12x11 |
| 1 x | Propeller Pleg CAM Carbon 10x4 |
| 1 x | Propeller Pleg CAM Carbon 12.5x7.5 |
| 1 x | Propeller Pleg CAM Carbon 14x10 |
| 1 x | Propeller Pleg CAM Carbon 11x7 |
| 1 x | Propeller Pleg CAM Carbon 16x13 |
| 1 x | Propeller Pleg CAM Carbon 15x10 |
| 1 x | Propeller Pleg CAM Carbon 12.5x9 |
| 1 x | Propeller Pleg CAM Carbon 14x8 |
| 1 x | Propeller Pleg CAM Carbon 12x9 |
| 1 x | Propeller Pleg CAM Carbon 13x5 |
| 1 x | Propeller Pleg CAM Carbon 13x8 |
| 1 x | Propeller Pleg CAM Carbon 14x9 |
| 1 x | GM Propellers Folding propeller Scale 20x13 Carbon 1 pair |
| 1 x | Propeller Pleg CAM Carbon 11x10 |
| 1 x | Propeller Pleg CAM Carbon 11x8 |
| 1 x | Propeller Pleg CAM Carbon 15x6 |
 |
| 10,873.20EUR |
