| 1 x | Premium servo extension 50cm |
| 2 x | Extension silicon 10 cm (Graupner) |
| 1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
| 1 x | Futaba Female 40 cm extension |
| 1 x | Futaba male 40 cm extension |
| 2 x | Premium servo extension 100cm |
| 2 x | 200 mm extensión servo HITEC/JR |
| 1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
| 1 x | Prolongador S-Bus JR/JR 20cm |
| 2 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
| 1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
| 1 x | Cable S.BUS 3 salidas 300 mm |
| 1 x | Extension silicon 30 cm female (Graupner) |
| 1 x | DYNAMOMETER S-1580 |
| 2 x | Extension 30 cm (Futaba) |
| 1 x | Extension silicon 30 cm female (Futaba) |
| 1 x | Cabel "Y" 30 cm (graupner) |
| 1 x | Futaba Female 40 cm extension |
| 2 x | Extension silicon 35 cm male (Futaba) |
| 1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
| 1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
| 1 x | Circlick securite |
| 2 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
| 1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 1 x | Crimping tool |
| 1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
| 1 x | Turbina KINGTECH K320 G5 |
| 1 x | Conector MR-60 (pareja) |
| 1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
| 1 x | Silent-blocks DLE 170M |
| 1 x | AX-60 starters (5 pcs) |
| 1 x | Green smoke canister 140 g |
| 2 x | Red smoke canister 65 g |
| 1 x | White smoke canister 100 g |
| 2 x | White smoke bombs AX-3 (10 pcs) |
| 1 x | Yellow smoke canister 100 g |
| 1 x | Smoke set "Glider" |
| 1 x | Yellow smoke canister 65 g |
| 1 x | Black smoke bombs AX-60 (5 pcs) |
| 1 x | Ventral support for AX-18/AX-60 |
| 2 x | Initior Receiver FRX2 Wireless |
| 2 x | Red smoke bombs AX-60 (5 pcs) |
| 2 x | Parachute expulsion foam |
| 1 x | Red smoke canister 140 g |
| 1 x | B4-0 rocket charges (6 pcs) |
| 1 x | Xplorer2 anemometro |
| 1 x | ABS angle 3,0x3,0x1000 mm |
| 1 x | Flap hinge (6 pcs) |
| 1 x | Blind nut M6 (4 pcs) |
| 1 x | Extension silicon 75 cm (Graupner) |
| 1 x | Extension silicon 25 cm (Graupner) |
| 1 x | Optical RPM Sensor |
| 1 x | Hovercraft sailcloth |
| 1 x | RX cabel |
| 1 x | Baseplate servo |
| 1 x | Propeller POWER-PROP 13x9 |
| 1 x | Propeller APC 14x8.5 Electric Pusher |
| 1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
| 2 x | Extension silicon 30 cm male (Graupner) |
| 1 x | Cyanocrylate MD GA460 odourless 20g |
| 1 x | 2,3 mm Prop Drive Günther M4 |
| 2 x | 3 mm Short Prop Adapter M5 |
| 1 x | Hardener P-25, canister 2.5Kg |
| 1 x | resin-hardener package L-385 with hardener H-385 (875 g) |
| 1 x | Pegamento Pu R 50g polyuretano |
| 1 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
| 1 x | White gelcoat 1 Kg |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | Big Crow DLE-170M |
| 1 x | 3 mm Long Prop Adapter M5 |
| 1 x | 2 mm Prop Adapter M5 |
| 1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 20m |
| 1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 50m |
| 1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 5m |
| 1 x | Fiberglass plate 350x150x0.3 mm |
| 1 x | Fiberglass plate 350x150x0.5 mm |
| 1 x | SERVO HOLDER |
| 1 x | Adjustable launching hook |
| 1 x | Premium servo extension 75cm |
| 1 x | 5 mm Prop Adapter M6 |
| 1 x | resin-hardener L-385 H-385 (1250 g) |
| 1 x | resin-hardener L-385 H-385 (5000 g) |
| 1 x | Epoxy Resin L + Hardener CL (60 min) kit/ 930 g |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | Epoxy Resin L 285 + Hardener 386, kit/ 675g |
| 1 x | Digital scale up to 40 kg |
| 1 x | UHU Por 50ml/40g |
| 1 x | UHU hart 35 g |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | 4 mm Prop Adapter M6 |
| 1 x | 3,2 mm Prop Adapter M5 |
| 1 x | Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g |
| 1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg |
| 1 x | Plastic caps for AIR BURTS (30 pcs) |
| 1 x | "S" set for boats |
| 1 x | 1 m servo "Premium" wire (white/red/blue) |
| 1 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
| 1 x | BlueCom™ Adapter (Android / WP) |
| 1 x | 2 piece mounting frame |
| 1 x | SKY MASTER 3.000 mm ARF |
| 1 x | Bidule 111 3000 mm |
| 1 x | Fiberglass plate 620x540x0,2 mm |
| 1 x | Extension silicon 50 cm (Futaba) |
| 1 x | IKARUS plane |
| 1 x | Adapter lead MPX/EC3 |
| 1 x | Conector JR Servo female (50 pcs) |
| 1 x | External LED's (2 pcs) |
| 1 x | MicroMatch PowerBox |
| 1 x | Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm |
| 1 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
| 1 x | 30 cm DEANS female connector |
| 1 x | BlueCom™ Adapter (iOS) |
| 1 x | Extension for SensorSwitch 60cm |
| 1 x | 2 piece mounting frame |
| 1 x | 200m servo "Premium" wire (white/red/blue) |
| 1 x | Cable set Premium™ MAXI "one4two" |
| 1 x | Extension for SensorSwitch 30cm |
| 1 x | Extension for LC-Display 50cm |
| 1 x | Altimeter Altis NAO |
| 1 x | Neumatic retractable landing gear (Aero-Naut) |
| 1 x | Xoar Electric Beechwood Prop 12x6 |
| 1 x | Propeller MEJZLIK 22x10 Electric light (36 g) |
| 1 x | PARTALL® Hi-Temp Wax, 340 g |
| 1 x | Epoxy adhesivo Elan-tech ADH 981.892 50ml (dark grey) |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | Blade Holder (3 blades) |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | Tail tube RAINBOW |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | Balsa panel 1.0x100x1000 mm |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | 38x4,5 mm wires output (2 pcs) |
| 1 x | Heat-conducting adhesive (2x2ml), WLK DK 4 |
| 1 x | Kavan Car 25% nitro 1l |
| 1 x | Propeller 11x4,7 SlowFlyer |
| 1 x | Propeller 3x2 |
| 1 x | Manometer 4 mm |
| 1 x | Propeller 8x4 Electric |
| 1 x | Propeller 8x4,3 SlowFlyer |
| 1 x | PRO-HV Dual Action Valve |
| 1 x | Xoar Electric Beechwood Prop 22x10 |
| 1 x | Propeller MEJZLIK 9,5x3 SF Carbon Indoor |
| 1 x | Propeller MEJZLIK 20x10 Electric light (36 g) |
| 1 x | Carburetor DLE 20 |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 1 x | Adhesive epoxy structures RESOLTECH 3350 (1 kg) |
| 1 x | Mould Resin P + Hardener EPH 161-P, kit/ 585 g |
| 2 x | Mould Resin P 10 kg |
| 1 x | Hardener Aero EPH 161 (500 g) |
| 1 x | DLE-55RA Ignition unit |
| 1 x | DLE 111 Carb gasket (V1) |
| 1 x | Epoxy Resin L (2.5 Kg) |
| 1 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm) |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | Fuselage Autogyro RAINBOW |
| 1 x | 4 blades set |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | Blade Holder Full (4 blades) |
| 1 x | BALSA trip 10x10x1000 mm |
 |
| 15,267.42EUR |
