1 x | Stickers-digit for marking |
2 x | Servo NARO Max Std |
2 x | |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | Hot Glue Stick RED |
1 x | Digital scale up to 40 kg |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | |
1 x | Z Bender - S Type Tool |
1 x | Starter EM Gear Power 80 |
1 x | Hot Glue Stick BLACK |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Starter Sullivan-STAR 603 DINATRON |
2 x | Ball Link Plier |
1 x | Screwdriver for Torx® TX8 |
2 x | Dust collector for mould cleaning |
1 x | Starter Sullivan-STAR 601 |
2 x | Hexagonal ball head 2.0 x 50 mm |
1 x | Vacuum pump 12 CFM |
2 x | 2,0x50 mm allen screwdriver |
1 x | Screwdriver for Hexagon 1,27mm |
1 x | Starter EM Gear Power 250 |
1 x | 3,0x60 mm allen screwdriver |
2 x | Cut tube |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | 2,5x60 mm allen screwdriver |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | Screwdriver for Torx® TX6 |
1 x | Vacuum pump P1-N |
1 x | Copier 5x20 cm pcs |
1 x | Hot Glue Stick GREEN |
1 x | Copier 2x20 cm pcs |
1 x | Z Bender - S Type Tool |
1 x | Crimping tool |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | Set cintas unión paracaídas 145 cm |
1 x | MAX pilot ARTF |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
2 x | Windsock Ozone L - 700 mm |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Paramotor Trike XL |
1 x | Paramotor BackPack XXS (without accessories) |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Para-RC Trike "RC-Bullix" |
2 x | Steering arm 16 mm Ø 3 mm (2 uds) |
2 x | Parachute P4 |
3 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
5 x | Canopy Latch |
2 x | Pilot "Dick" Legends Series (Slimline) |
1 x | Profile ABS half cane 2.5x1000 mm |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
1 x | Connector CAN 15 |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Extension MPX-MPX 20 cm |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | Green smoke canister 140 g |
3 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
2 x | Sealing Iron Profi LCD |
1 x | Kwik link unmount tool |
1 x | Roller cutter 28 mm |
1 x | |
1 x | Tube support Ø 6mm (10 pcs) |
1 x | Rocket D9-7 |
1 x | Support conector MPX (6 pcs) |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Allen wheel collar M3x5 |
2 x | Aluminun wheel collar 5 mm Ø (4 uds) |
2 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg |
2 x | Soporte servo KST X08/H and Plus |
1 x | 80 mm rods set for direction control |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
2 x | Servo KST DS125MG servo ala 10mm 28g 7Kg |
2 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
2 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
2 x | LUCAS pilot ARTF |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm |
1 x | 28x5 mm wires output (2 pcs) |
1 x | Landing gear frontal support 29x26x13,5 |
2 x | Paramotor Kit Camo H1.5/ Ben Red |
2 x | Allen wheel collar M4x4 |
1 x | 45 mm rods + T patellas set for direction control |
1 x | AXI 2204 Multicopter |
2 x | Cockpit plastic closing |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Servo GO-12S69MG 26kg.cm 0.10s/60º |
2 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | T-Motor U7-V2.0 Kv420 |
1 x | Servo KST BLS915 HV V8.0 25Kg 20mm 78g |
2 x | Opale Rucksack |
1 x | Servo KST X10-710 V8.0 7.5Kg HV |
1 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
1 x | Quadcopter Q50 Kit Carbon Fiber |
1 x | Steering arm 12 mm Ø 4 mm |
2 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Servo GO-1053MG 20 kg.cm 0.17s/60º |
2 x | 11 mm Rubber pads (14 pcs) |
1 x | Control for forward wheel (MINI) |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Soporte servo KST X10 mini / DS135MG |
1 x | Snap pin for micro clevis (10 uds) |
1 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th |
1 x | 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti |
1 x | Wing OXY 0,5 pulgadas2 |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Spare Part Frame Set for EACHINE RACER 250 |
2 x | Split pin 1x8 mm (10 uds) |
1 x | Servo GO-1023MG 7.0 kg.cm 0.09s/60º |
1 x | Servo SAVOX SA-1256 TG |
1 x | Servo SAVOX SH 0257 MG |
1 x | ALU servo arm 90º 3 mm shaft |
1 x | ALU double servo arm 3 mm shaft |
2 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell |
1 x | Fiberglass heat shield Ø 4 mm 1000 mm |
1 x | Silicone black 0,75 qmm cable ( 1 m) |
1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
2 x | Protective Cover for wires Ø 15 mm 1000 mm |
1 x | ABS Strip 1.5x8.0x1000 mm |
2 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Festo 4mm Tubing Holder (10 uds) |
2 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
2 x | Brass rod Ø 0.8 mm x 1000 mm |
2 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
2 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | ALU servo arm 3 mm shaft |
1 x | Servoarm Aluminium SH-82 |
1 x | EC-Cutter |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | Pump hose (Ø 6/8 mm) transparent |
1 x | Foam air filter Ø 48 mm, blue |
1 x | Boxed KIT OF 7 Rotary Burrs FINE |
1 x | Propeller diller for DLE111 and DA85-150 |
1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
1 x | ABS Strip 1.5x2.0x1000 mm |
2 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | One touch canopy lock |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
1 x | Silicone black 0,75 qmm wire ( 25 m) |
1 x | Straightened threaded rod M2-1m |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Pushrod octagone 3/2 with coupler M2 |
1 x | Landing gear frontal support 25x32x16 |
1 x | Birch plywood plate 600x300x1.2 mm |
1 x | SUS wire 3m (nylon coated) |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13 |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Concave-Convex sandpaper file 13 mm |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
2 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | Rigid coupling brass Ø 5 mm L: 25 mm |
1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
1 x | Wing OXY 5,0 m2 |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Wing bolts M3 Steel screw Red (2 pcs) |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Servo KST MS825 V8.0 35kg 8.4v |
1 x | Rescue 1,8m2 / BackPack |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Charger SKY RC e680 |
1 x | Rigid coupling brass Ø 4 mm L: 25 mm |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Window mounting channel 5m |
1 x | Spare Shaft Ø4mm L:450x23mm M4 |
1 x | Antenna Hole Cap V1 (Silver) |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | Spare Shaft Ø4mm L:450x18mm M4 |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
1 x | Windsock Ozone L -1200 mm |
1 x | Covered closure or fairings |
1 x | Snap for floding prop for 2 mm axi |
1 x | Split M1,2x10 (10 pcs) |
1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
2 x | Aramid 50 daN 50 m |
1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
1 x | Tip wing protector 40x14 (2 pcs) |
1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
1 x | Silicone red 1,0 qmm wire (100 m) |
1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
1 x | PVC 0,35 qmm servos wire Graupner (100 m) |
1 x | Silicone black 6,0 qmm wire (25 m) |
1 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | BOEING 727, Retract set for Boeing 727 |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | Giant Scale Muffler SLIMLINE D.A. 100 (2pcs) |
1 x | Extension silicon 75 cm (Futaba) |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | Pilot "Goose" (Slimline) |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | BOEING 727, Jet pipe for Boeing 727 |
1 x | Pilot "Anthony" (Slimline) |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | 50 mm aluminium spinner (Kavan) |
1 x | Straightened threaded rod M3 - 1m |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | DLE 30 complete electronic ignition |
1 x | 100g Flux Paste for Silver Solder |
1 x | Cylynder DLE 20-RA |
1 x | Sub-D Plug Mold |
1 x | Propeller diller 5/6,3/8/9 |
1 x | Carburetor DLE 30 |
1 x | PYRO 750-50L |
1 x | Motor MVVS 2.0/1120 |
1 x | Motor A50-14L Turnado V3 Glider |
1 x | KIRA 600-22 6,7:1 |
1 x | Motor A50-12 L V4 |
1 x | Motor OS 3805-1200 electric |
1 x | Shaft for A60-L (140mm) |
1 x | KIRA 480-43 |
1 x | KIRA 480-31 5,2:1 |
1 x | Motor Mega AC 16/25/02 |
1 x | KIRA 480-34 5,2:1 |
1 x | Motor A20-20 L EVO |
1 x | Propeller CFK 18x9 |
1 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
1 x | DLE Ignition 111/120/170 |
1 x | DLE 55 Muffler |
1 x | Steel brush wheel with 2.35mm |
1 x | Escape DLE-60 Izda |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Actro 32-3 Heli MAX 5mm |
1 x | MVVS presuritation conection 26-175 cc |
1 x | Head Gasket 30cc (3 pcs) |
1 x | Cotter MVVS 45/50/58 cc |
1 x | Motor 2212 (1000KV) Quadcopter F450 |
1 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
1 x | Motor Mega AC 16/25/04 COMBAT |
1 x | Mega Motor RC 400 F5J 1950KV |
1 x | PYRO 700-45 |
1 x | Motor A20-20 L EVO |
1 x | KIRA 500-26 6,7:1 |
1 x | Motor Scorpion HKIII 4035-560 Kv |
1 x | Motor Mega AC 16/07/06 |
1 x | Motor HP 220/30/A3 P4 5:1 |
1 x | PYRO 900-52L |
1 x | Rocket D3-P |
1 x | Propeller CFK 12X6 |
1 x | Propeller CFK 14x6.5 |
1 x | 1 m servo "Premium" wire (white/red/blue) |
1 x | Propeller CFK 15x13 |
1 x | BULLIT Wing 840 mm |
1 x | 140 mm rods + T patellas set for direction control |
1 x | DLE 111 Carb gasket (V1) |
1 x | Schul-Malpinsel Gr.5 |
1 x | Mold plugs XT-30 |
1 x | Hub DLE 30 |
1 x | DLE 55 Ignition unit |
1 x | Piston ring for DLE-20 |
1 x | Propeller diller for DLE170 |
1 x | Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs) |
1 x | Piston ring for DLE-55/111/222 |
1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
1 x | Piston ring for DLE-30 |
1 x | Propeller diller for DA50, DLE55 red |
1 x | Tool for entel |
1 x | Propeller drill jig DA 100/85/120/150/200 and VM 60-210 |
1 x | Compact Silencer KOLM BX-155 |
1 x | Exhaust pipe BX 155 Left |
1 x | ESC 40A. Opto starter Kolm |
1 x | Engine Kolm BX-155-2 with starter |
1 x | Exhaust gasket Valach 85 |
1 x | Piston ring for motor 58/116 cc |
1 x | Spark Plug BRISK M14x1.25 |
1 x | Flex-headers for Valach VM 85B2-FS |
1 x | Stainless steel flange for VM 60/70/120/140 |
1 x | Silencer Ring 7-35 |
1 x | 7-Cylinder 35cc 4-Stroke Glow Radial Engine |
1 x | EVOLUTION 10 GX gasoline motor |
1 x | Diaphragm Set Walbro 116/152cc |
1 x | Rear cover O-ring 26/30 cc |
1 x | VALACH VM 85 B2-FS |
1 x | Cylinder-piston Assembly 30cc |
1 x | Motor ST 7-160 B |
1 x | Cylinder head, left for VM 170/210 |
1 x | Combo AM480 T-Motor 650 Kv |
1 x | Motor Mega AC 16/15/08 |
1 x | PYRO 750-50L Competition |
1 x | Motor A50-12 L Glider |
1 x | PYRO 700-56L |
1 x | Motor Mega AC 16/07/03 |
1 x | A60-6XS V4 28-Pole |
1 x | Nylon gear block Ø 3 mm (2 uds) |
1 x | Motor A40-10 L V2 14-Pole Glider |
1 x | Motor Mega AC 16/15/03 |
1 x | Motor A10-7 L 4,4:1 |
1 x | Motor Mega AC 16/30/01 |
1 x | KIRA 500-36 6,7:1 |
1 x | KIRA 480-43 5,2:1 |
1 x | Shaft for A60-L V4 |
1 x | KONDOR 15-92 |
1 x | Motor A20-22 L EVO |
1 x | PYRO 800-40 Long Axi |
1 x | Axle for motor A50-L |
1 x | Motor A30-14 M V2 6 Poles |
1 x | Motor Mega AC 16/15/05 CE F5J |
1 x | Motor Mega AC 16/07/04 |
1 x | Axle for motor A30-XL V2 |
1 x | Motor Mega AC 22/30/02 |
1 x | Motor Mega AC 16/25/04 |
1 x | Motor Mega AC 16/15/07 |
1 x | Motor Advance 30-10 F3A |
1 x | KIRA FAI 5F5/4s |
1 x | Motor Mega AC 16/15/04 |
1 x | Motor MVVS 5.6/690 GLIDER |
1 x | KIRA 480-38 5,2:1 |
1 x | KIRA 600-17 |
1 x | Motor A40-10S V4 14-Pole |
1 x | Motor A200-6 |
1 x | Shaft for A60-XS-V2 (112,5mm) |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Motor Mega AC 16/07/08 |
1 x | Motor A50-10L Turnado V3 Glider |
1 x | KIRA 400-34 |
1 x | Motor Mega AC CAR 10 PRO |
1 x | Motor OS 3820-1200 electric |
1 x | Motor A30-12 XL Glider |
1 x | KIRA 400-27 |
1 x | PYRO 800-48 Long Axi |
1 x | KIRA 600-30 6,7:1 |
1 x | Propeller CFK 12.5x7 |
1 x | Propeller CFK 12.75x13 |
1 x | Propeller CFK 14x10 |
1 x | Silicone red 4,0 qmm wire ( 1 m) |
1 x | Fiberglass heat shield Ø 6 mm 1000 mm |
1 x | Propeller CFK 23x12 |
1 x | Fiberglass heat shield Ø 8 mm 1000 mm |
1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
1 x | PVC 0,14 qmm servo wire Futaba (5 m) |
1 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
1 x | Silicone black 4,0 qmm wire ( 1 m) |
1 x | Propeller RF CFK 13x6.5 |
|
36,373.13EUR |