| 1 x | Lock washer 2.2 mm (20 pcs) |
| 1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
| 1 x | Spray adhesive INFUTAC (Clear) 500 ml |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
| 2 x | Straightened rod Ø 1.5 mm x 1500 mm |
| 1 x | AL Axle Shaft 4.0x16 mm (2 uds) |
| 1 x | 4 LiPo XH>EH adapter |
| 1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
| 1 x | TrainerCord (master-learner) |
| 1 x | PCARD Wireless System |
| 1 x | Oracover ROYAL RED 2m |
| 1 x | ABS angle 2,0x2,0x1000 mm |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | Interface Realflight Simulator |
| 1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
| 1 x | Initior Receiver FRX2 Wireless |
| 1 x | Green smoke canister 140 g |
| 4 x | 400 Newtons FEMA absorber |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
| 1 x | B4-0 rocket charges (6 pcs) |
| 1 x | Truck-trailer for gliders 720 x 285 mm |
| 1 x | Yellow smoke bombs AX-60 (5 pcs) |
| 1 x | Ply-Span 450x600/13g Blue |
| 1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
| 1 x | ABS angle 6,0x6,0x1000 mm |
| 1 x | Oratex Antik 2m |
| 1 x | Oracover GREY Seafire Sea 2m |
| 1 x | U Profile ABS 2,0x4,0x1000 mm |
| 1 x | Carbon fiber rod 6.0 mmx1000 mm |
| 1 x | EasyFLY Addon |
| 1 x | Oratex Natural White 2m |
| 1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | AX-60 starters (5 pcs) |
| 1 x | Xplorer3 anemometro |
| 1 x | U Profile ABS 1,0x2,0x1000 mm |
| 1 x | Oracover Yellow CUB 10 m |
| 2 x | Carbon fiber flat 1000x3.0x0.5 mm |
| 1 x | "M" set |
| 1 x | Black smoke bombs AX-60 (5 pcs) |
| 1 x | Propeller balancer |
| 1 x | Support pump Xicoy X45 |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 1 x | One touch canopy lock |
| 1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Crimping tool |
| 1 x | ABS tube 4.0x3.0x1000 mm |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
| 1 x | ABS tube 6.0x5.0x1000 mm |
| 1 x | Aro pasacable Ø25 mm (4 pcs) |
| 1 x | Aro pasacable Ø20 mm (4 pcs) |
| 1 x | Hot Glue Stick RED |
| 1 x | Hot Glue Stick BLACK |
| 1 x | Servo arm with 6 mm hole to FEMA 9800A |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | Soporte filtro FESTO (4 pcs) |
| 1 x | Adapters for 7.5 - 35cc aircraft and naval engines |
| 2 x | Pilot "Adolf" Legends Series (Slimline) |
| 2 x | 1/6 Pilot "Cindy" |
| 1 x | 1/12 Pilot "Langley" |
| 1 x | Glidder Mü13e (Bergfalke) |
| 1 x | Motor rotor LA-500 |
| 2 x | Pilot LA 500 |
| 2 x | Glider STROLCH |
| 2 x | LA500 pre-rotation gear hub |
| 1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
| 1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
| 1 x | Straightened rod Ø 5.5 mm x 1000 mm |
| 1 x | Landing gear axle Ø 6 mm (2 uds) |
| 2 x | LA500 housing-lower cyclic |
| 1 x | Set stickers JEEMO "Andy" |
| 1 x | LA500 pre-rotation gear |
| 1 x | JEEMO Kit ARF Basic (2 color) - XTRALIGHT |
| 1 x | Glider KNIRPS |
| 1 x | LA500 rotor head shaft |
| 1 x | Canopy Sweet / Siesta |
| 1 x | Avia spare blue cockpit (Top Model) |
| 1 x | FANTASY ARF 3.0m, Fundas alas |
| 1 x | Gobe R-26S (Airwold) |
| 1 x | Ion Pro NG electric with flaps GREEN Fluor (JP Model) |
| 1 x | FOX 2.300 mm V2 PNP (FMS) |
| 1 x | LO 100 ARC 3.3m |
| 1 x | Fascination 3600 mm (Top Model) |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | Cable adapter iCharger |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 2 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Lite Plywood panel 600x300x3.0 mm |
| 1 x | Carbon fiber rod 8.0 mmx1000 mm |
| 1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
| 1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | Carbon fiber flat 1000x6.0x0.8 mm |
| 1 x | Jet Afterburner Simulator NF-Jet3 RY |
| 1 x | Jet Afterburner Simulator NF-Jet3 YSW |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | Balsa panel 1.5x100x1000 mm |
| 1 x | A/C quality beech plywood 1520x750x3.0 mm |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 2 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Fiberglass tube 6/4x1000mm |
| 1 x | UHU Por 50ml/40g |
| 1 x | 1/6 Pilot "Tony" |
| 1 x | Civilian pilot "Joe" size 9cm (Slimline) |
| 1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
| 1 x | 1/4 Pilot "Heidi" |
| 2 x | BALSA triangular 15x15x1000 mm |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Jun-Si iCharger 4010 Duo |
| 2 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | Jet Afterburner Simulator NF-Jet4 RY |
| 2 x | Birch plywood plate 600x300x1.2 mm |
| 1 x | Jet Afterburner Simulator NF-Jet2YY Set |
| 1 x | Carbon fiber rod 5.0 mmx1000 mm |
| 1 x | 200 Newtons FEMA absorber |
| 1 x | Carbon fiber flat 1000x3.0x0.13 mm |
| 2 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | Lite Plywood panel 600x300x2.0 mm |
| 1 x | NF-3XL set |
| 1 x | Carbon fiber rod 20 mmx1000 mm |
| 1 x | NF-3X-350 set |
| 1 x | Birch plywood plate 600x300x1.5 mm |
| 1 x | Jet Afterburner Simulator NF-Jet2 |
| 1 x | Carbon fiber rod 7.0 mmx1000 mm |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | Carbon fiber rod 14 mmx1000 mm |
| 1 x | Carbon fiber rod 1.5 mm x 2000 mm |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | Squared carbon wing joinner 5x5x220 mm |
| 1 x | Birch plywood plate 600x300x2.5 mm |
| 1 x | Jet Afterburner Simulator NF-Jet3 RYS |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | Carbon fiber rod 12 mm x 1000 mm |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | 100 Newtons FEMA absorber |
| 1 x | Carbon fiber rod 0.8 mmx1000 mm |
| 1 x | NF-3m Heli Kit |
| 1 x | Carbon fiber rod 4.0 mmx1000 mm |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | Carbon fiber rod 10 mm x 1000 mm |
| 1 x | Carbon fiber rod 16 mm x 1000 mm |
| 1 x | 300 Newtons FEMA absorber |
| 1 x | quality beech plywood BIRCH 600x300x2.0 mm |
| 1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | Absorver mount set for 5-10 Kg models |
| 1 x | A/C quality beech plywood 1520x750x4.0 mm |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | Balsa panel 10x100x1000 mm |
| 1 x | Balsa panel 2.5x100x1000 mm |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | Balsa panel 4.0x100x1000 mm |
| 1 x | A/C quality beech plywood 600x300x0.6 mm |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | Balsa panel 3.0x100x1000 mm |
| 1 x | 150 Newtons FEMA absorber |
| 1 x | A/C quality beech plywood 600x300x8.0 mm |
| 1 x | Balsa panel 1.0x100x1000 mm |
| 1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
| 1 x | 1/12 Pilot "Cougar" |
| 1 x | 1/6 Pilot "Garry" |
| 1 x | Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm) |
| 1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
| 2 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
| 1 x | Piloto jet 130 mm |
| 1 x | 1/10 Pilot "Jack" |
| 1 x | 1/7 Pilot "Japanese" |
| 1 x | Piloto Jet "Green" 1/6 Scale |
| 1 x | GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l) |
| 1 x | Pilot "Goose" (Slimline) |
| 1 x | Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l) |
| 1 x | 1/10 Pilot "Jimmy" |
| 1 x | Receiver bed (Blue) |
| 1 x | Secraft Fuel system v2, red color |
| 1 x | ABS Strip 1.5x4.0x1000 mm |
| 1 x | Propeller APC 10x5.5 MR Electric multirrotor PUSHER |
| 1 x | M3-M4 rubber washer (8 pcs) |
| 1 x | ABS Strip 1.0x3.0x1000 mm |
| 1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
| 1 x | LA500 front gear holder |
| 1 x | F-16 Scale 1:6, Electric retract landing gear |
| 1 x | Brass rod Ø 0.5 mm x 1000 mm |
| 2 x | Landing gear axle 4x21 4 mm (2 uds) |
| 1 x | Avia (Top Model) |
| 1 x | Moki Pushrod S250 (1 pcs) |
| 1 x | Q-12 2000 mm Electric |
| 1 x | TAKEO 3.6m |
| 1 x | Avanti S Jet, Kerosene+Smoke Tank(SebART) |
| 1 x | BLANIK 50 V2 Silver/Orange (SebArt) |
| 1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
| 1 x | Piloto Jet "Red" 1/6 Scale |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | Propeller 11x4,7 SlowFlyer |
| 1 x | Propeller POWER-PROP 10x6 |
| 1 x | Propeller electric carbon 9.5x6 |
| 1 x | 15x7 tree blades propeller |
| 1 x | Propeller POWER-PROP 12x9 |
| 1 x | Propeller POWER-PROP 12x6 |
| 1 x | Aluminium red ball links M3 V1 (10 pcs) |
| 1 x | ABS I Strip 10x5x1000 mm |
| 1 x | ABS Strip 1.5x8.0x1000 mm |
| 1 x | Aluminium cap bolt washer M3 green (8 pcs) |
| 1 x | Marker ties (20 pcs) |
| 1 x | ABS Strip 1.0x5.0x1000 mm |
| 1 x | 20,5x14,5 Falcon electric V2 (40 g) |
| 1 x | Propeller APC 10x5 Electric |
| 1 x | Rudder 2_Tray 4~4.5 inch |
| 1 x | Propeller APC 12x8 Electric |
| 1 x | Propeller APC 12x6 Electric Pusher |
| 1 x | Aluminium wide washer M4 Red (4 pcs) |
| 1 x | Propeller APC 13x4 Electric |
| 1 x | Propeller APC 10x6 Electric |
| 1 x | Propeller APC 10x6 Electric Pusher |
| 1 x | Ball link duraluminium M3 V1 (10 pcs) |
| 1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
| 1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
| 1 x | ASPIRE Red ARF 2.000 mm |
| 1 x | Electric Landing Gear ASPIRE (Elektron Retracts) |
| 1 x | X-RAY Micro QR (Rudder) |
| 1 x | Electric Landing Gear ASPIRE |
| 1 x | Pilot "Anthony" (Slimline) |
| 1 x | Electric Landing Gear ODYSSEY |
| 1 x | F4E Phantom Scale 1:7 |
| 1 x | E-FUN BUG (ROI-Import) |
| 1 x | 1/6 Pilot "Buddy" |
| 1 x | Propeller POWER-PROP 14x10 |
| 1 x | Propeller electric carbon 10x6 |
| 1 x | Landing gear axle Ø 4 mm (2 uds) |
| 1 x | Fox 4000 mm Airworld,cabina |
| 1 x | Motor MOKI 160 BVT boxer 4-stroke |
| 1 x | Fox 4000 mm (Airwold) |
| 1 x | MOKI S250 Intake Bend |
| 1 x | Fox 4000 mm with flaps (Airwold) |
| 1 x | THERMIK DREAM 3.000 mm (Topmodel) |
| 1 x | THERMIK XXXL 4,9m CFK Electric |
| 1 x | Pegasus 2050 mm F4J (Top Model) |
| 1 x | THERMIK XXXL 4,9m D-Box Electric |
| 1 x | MYSTIQUE 2.9 m ARF |
| 1 x | Ka 8 B (Top Model) |
| 1 x | Ion Pro, Canopy (JP Model) |
| 1 x | CESSNA 50E White/Blue |
| 1 x | SunCover 2.2 Class (SebART) |
| 1 x | BLANIK 50 V2 Silver/Blue (SebArt), cabina |
| 1 x | Avanti S 2.3m Jet WHITE/BLUE (SebArt) |
| 1 x | SunCover 110/120/140 Class (SebART) |
| 1 x | BAE HAWK Mini 1.29m MILITARY ARROW ARF +elec.L.Gear + 3 Microser |
| 1 x | Electric rocket starters (6 pcs) |
| 1 x | DPSI Ampere & Voltage bundle |
| 1 x | OPTOTRONIX Aurora LCU |
| 1 x | Oracover White 10 m |
| 1 x | White smoke bombs AX-9 (10 pcs) |
| 1 x | Crystal Universal RX 35.020 Ch 62 |
| 1 x | LED wire (blue - 2pcs) |
| 1 x | Jet Afterburner Simulator NF-Jet1RY Set |
| 1 x | XCALIBUR Fuel Tank with built in UAT |
| 1 x | Tyres 70 mm Xclaibur (2 pcs) |
| 1 x | Avanti XS Jet , Tank for Keroseno (SebArt) |
| 1 x | Avanti S 1.8m Jet RED Style |
| 1 x | Albatros ,spare fuselage (Top Model) |
| 1 x | Optical RPM Sensor |
| 1 x | Magnetic Connect locking system |
| 1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
| 1 x | Optotronix Aurora Plug |
| 1 x | wing/fuselage connector for 3 pines AWG 20-24 |
| 1 x | DPSI RV Mini 5 (2008) |
 |
| 37,525.23EUR |
temporarily out of stock
under request
few units
