3 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
2 x | Ferrita 17x10x6.5 mm |
1 x | Ferrita 14x8x5.5 mm |
1 x | SE Ring 350 mm (2 pcs) |
1 x | SE Ring 240 mm (2 pcs) |
1 x | SE Ring 450 mm (2 pcs) |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | SE Ring 200 mm (2 pcs) |
2 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
3 x | SE Ring 250 mm (2 pcs) |
2 x | Marker ties (20 pcs) |
1 x | Ring 320 mm length (5 pcs) |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
2 x | Tape GFK 50 mm |
2 x | Tape GFK 38 mm |
1 x | Spikes Band (5 m) |
2 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Foil for sticking flaps and ailerons |
2 x | Cinta Goldfix 1m |
1 x | SE Ring 360 mm (2 pcs) |
2 x | 20x200 mm battery rings |
1 x | Ferrita 27x14x7 mm |
1 x | M3 Maxi ball link (2 uds) |
1 x | M3 Maxi ball link (2 uds) |
1 x | Blue metalic ball link M2/2 azul (2 pcs) |
1 x | M2,5 5Diam short black ball link V2 (2 pcs) |
1 x | Ball link M3 (10 pcs) |
1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
1 x | Ball link M1.6 (6 uds) |
2 x | Interface Jack Adapter IKARUS |
3 x | Simulador RealFlight RF-9.5 S (sin emisora) |
1 x | Slave-cable USB Easy Sim |
3 x | EasyFLY Addon |
2 x | SIMtransmitter 6 Mode 2 |
1 x | GameCommander USB Universal |
1 x | Rescue 1,8m2 / BackPack |
1 x | Round Rod 5,0x1000 mm |
1 x | TrainerCord (master-learner) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | Bungee HLG Premium |
1 x | SE Ring 300 mm (2 pcs) |
3 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | SE Ring 330 mm (4 pcs) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Retract undercarriage for gliders up to 3,5 Kg |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | Air pressure gauge |
1 x | Motor Mega AC 22/30/02 |
1 x | Landing gear clamp for Ø 2 mm (4 uds) |
1 x | Set cintas unión paracaídas 145 cm |
1 x | Aero shocks |
1 x | Motor Mega AC 22/35 4S |
1 x | Polyurethan FESTO hose 3x0,5 mm, transparent |
1 x | Nylon gear block Ø 3 mm (2 uds) |
1 x | Motor Mega AC 16/15/04 |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | KIRA 480-34 |
1 x | KIRA 480-38 |
1 x | KIRA 600-24 6,7:1 |
1 x | Cyanoacrylate MD GLUE plus 405, for extreme loads 20g |
1 x | Combo FOXY C3530-700 + FOXY 80 amp |
1 x | KIRA 480-38 5,2:1 |
1 x | PYRO 800-48 Long Axi |
1 x | KIRA 500-26 6,7:1 |
1 x | Hardener Aero EPH 161 (500 g) |
1 x | PYRO 700-45 |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | KIRA 600-30 6,7:1 |
1 x | |
1 x | Digital scale up to 40 kg |
1 x | DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV) |
1 x | MAMBO 17 |
1 x | KIRA 600-20 6,7:1 |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | PYRO 750-50L |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | KIRA 500-30 6,7:1 |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | PYRO 650-53L EJE LARGO |
1 x | KIRA FAI 5F5/4s |
1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
1 x | |
1 x | Dremel PERMAGRIT thin lime |
1 x | Copier 2x20 cm pcs |
1 x | Cut tube |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
1 x | Gear set HITEC HS-81 |
1 x | Servo GO-1088MGW 74 kg.cm 0.125s/60º |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Gear set HITEC D645 MW |
1 x | Gear set HITEC HS-311/322/325BB |
1 x | Servo GO-1070MG 40 kg.cm 0.10s/60º |
1 x | Interface Realflight Simulator |
1 x | Servo GO-02 Digital 1.8g |
2 x | Electric spoiler 300 mm (2 pcs) |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | Digital precision scale up to 2000 g |
1 x | 100g Flux Paste for Silver Solder |
1 x | Crimping tool |
2 x | Spinner NUT M5 |
1 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
1 x | PPM Encoder Module |
1 x | Concave-Convex sandpaper file 13 mm |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | Crimping tool |
1 x | 2,5x60 mm allen screwdriver |
1 x | Jet Pipe 160N-250N (120/130 mm) |
1 x | HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program |
1 x | Servo Digital HITEC HS-5065 MG |
1 x | Servo GO-1017MG 4.5 kg.cm 0.10s/60º |
1 x | Servo GO-12S69MG 26kg.cm 0.10s/60º |
1 x | Gear set HITEC HS-645MG/5645MG/5685MH |
1 x | Servo GO-1053MG 20 kg.cm 0.17s/60º |
1 x | Servo GO-1280 MG 40 kg.cm 0.085s/60º |
1 x | Servo case HS-225MG/225BB/5245MG |
1 x | Gear set HITEC HS205/225MG/5245MG/7245MH |
1 x | Gear set HITEC HS-55 |
1 x | Servo HITEC D645 MW |
1 x | Servo GO-10S41MG 10.5 kg.cm 0.075s/60º |
1 x | Gear set HITEC HS-225 |
1 x | Servo HITEC D131 MW nano |
1 x | RF9 Flight Simulator with Spektrum Controller |
1 x | Gear set HITEC HS-65 HB |
1 x | Ballast 700gr OPALE |
1 x | Paramotor BackPack XXS 2 |
1 x | Glases Stratus |
1 x | Antenna MULTIPLEX 2.4 GHz 400mm RX-9/12/16-DR pro |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti |
1 x | USB programador GO servos |
1 x | Servo GO-12S70MG 20.5kg.cm 0.06s/60º |
1 x | Fod Guard 73x32 mm |
1 x | Pendulun "Special" to tank 60g |
1 x | Bluetooth Adapter JET CENTRAL |
1 x | Spinner Alumin. fixed propeller 30 mm / 3,0 mm |
2 x | Smart Soldering Iron 110W/230V AC |
1 x | Roller cutter 28 mm |
1 x | Screwdriver for Torx® TX6 |
1 x | Screwdriver for Hexagon 1,5mm |
2 x | Steel brush wheel with 2.35mm |
1 x | Rubber Insert soft, 1 Pcs. |
2 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
1 x | Z Bender - S Type Tool |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | 10x7 tree blades propeller |
1 x | Propeller POWER-PROP 13x8 |
1 x | 12x8 tree blades propeller |
1 x | JP Hobby ER-120 Tricycle Full Set with Brakes (JSM Xcalibur Ripm |
1 x | SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS) |
1 x | Shaft KPG25 4,2:1 |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
1 x | Electric starter suitable for the DLE111, DLE120 and DLE85. |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm) |
1 x | FALCON 27X11 CARBON PROPELLER (GAS) |
1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
2 x | Canopy Sweet / Siesta |
2 x | Electric spoiler 185 mm (2 pcs) |
1 x | Spinner Alumin. fixed propeller 30 mm / 3,2 mm |
1 x | Spinner Alumin. fixed propeller 40 mm / 4,0 mm |
1 x | Spinner NUT M10x1 |
1 x | Spinner Alumin. fixed propeller 40 mm / 3,2 mm |
1 x | Spinner NUT M8x1,25 |
1 x | Spinner NUT 1/4x28 |
2 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
2 x | Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs) |
2 x | Sub-D Plug Mold |
1 x | PROXXON - SAW BLADE OZI/E, 65MM, 160 TOOTH |
2 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | Rubber Insert hard, 1 Pcs. |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | Starter 12v (Max 90 and 15ccm) |
2 x | Starter Sullivan-STAR 601 |
1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
1 x | PROXXON - SAW BLADE 8MM 0ZI220E |
1 x | PROXXON - TRIANGLE / DELTA SANDING MACHINE OZI/E |
1 x | Pump hose (Ø 6/8 mm) transparent |
2 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
1 x | Schul-Malpinsel Gr.5 |
2 x | Sealing Iron STANDARD |
1 x | PROXXON - SAW BLADE HSS (50MM - 100T) (28020) |
1 x | Sealing Iron Sleeve STD |
2 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
1 x | PROXXON - SAW BLADE DIAMOND OZI/E |
2 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
2 x | Starter EM Gear Power 80 |
1 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
1 x | Screwdriver for Hexagon 1,27mm |
1 x | Sandpaper file 13 mm |
1 x | Sealing Iron Profi LCD |
1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
1 x | Tool for entel |
1 x | Tachometer HANGAR 9 digital |
1 x | Welder 100W/200V |
1 x | Spare round blades, 28 mm, pack/ 2 pcs. |
1 x | Starter EM Gear Power 250 |
1 x | Tool for entel |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs |
1 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
1 x | Vacuum pump P1-N |
1 x | Vacuum pump 12 CFM |
1 x | Universal Filter |
1 x | XT-60 Plug Mold |
1 x | Tube bender |
1 x | Starter Sullivan-STAR 603 DINATRON |
1 x | Canopy Astra |
1 x | Sliding window 1:2,4 / 1.2,6 Scale |
1 x | 250 mm / 16 mm Airbrakes |
1 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
1 x | Propeller MASTER 7x3 |
1 x | Propeller POWER-PROP 11x8 |
1 x | Propeller POWER-PROP 11x6 |
1 x | Propeller MASTER 7x5 |
1 x | Propeller MASTER 7x4 |
1 x | DEMON CORTEXpro |
1 x | CORTEX |
1 x | BATTWIN BATTERY REDUNDANCY SYSTEM |
1 x | resin-hardener package L-385 with hardener H-385 |
1 x | Brass ball links BS M3 V1 (10 pcs) |
|
16,978.97EUR |