| 1 x | SIMtransmitter 6 Mode 2 |
| 3 x | LOWER TOW HOOK |
| 1 x | Xplorer4 anemometro |
| 3 x | Towing hook <3m |
| 2 x | Adjustable launching hook |
| 3 x | Towing hook |
| 2 x | Fixed launching hook |
| 2 x | SERVO HOLDER |
| 1 x | Xplorer1 anemometro |
| 1 x | Xplorer3 anemometro |
| 3 x | Tow hook for tug |
| 2 x | Ventus 1:4 set of instruments |
| 1 x | Interface Jack Adapter IKARUS |
| 1 x | EasyFLY Addon |
| 2 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | Ferrita 27x14x7 mm |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 2 x | Beech dowels 4.0 x 1000 mm |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 2 x | Ferrita 14x8x5.5 mm |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | Fresa corte diamante Ø 1.0mm (bola) |
| 1 x | White smoke canister 65 g |
| 1 x | 140 mm rods + T patellas set for direction control |
| 1 x | Connectors banna oro 0,8 mm (M/F) |
| 1 x | Cable tie mounts 4.3 (4 uds) |
| 1 x | AX-60 starters (5 pcs) |
| 1 x | ORACOVER Ferrari red (2 m) |
| 1 x | 100 mm rods + T patellas set for direction control |
| 2 x | Tube support Ø 6mm (10 pcs) |
| 1 x | Support Antena 2.4 Ghz (2 pcs) |
| 2 x | Support conector MPX (6 pcs) |
| 2 x | Pasacables rectangular 40x15 mm (4 pcs) |
| 2 x | Tailwheel for 20/60 size |
| 1 x | Tailwheel for 60/120 size |
| 1 x | Towing hook |
| 1 x | Tailwheel for 40/90 size |
| 1 x | Landing gear strap large (4 uds) |
| 1 x | T-Hose connector 2-2-2 mm |
| 1 x | Nut M2 securing |
| 1 x | Baering 3x8x4 |
| 1 x | Nut M1,6 |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | T-Hose connector 4-4-4mm |
| 1 x | DINO Glider ARC |
| 1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
| 1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
| 1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
| 1 x | THERMIK XL 4000 mm |
| 1 x | Katana Mini carbon wheel pants (2 pcs) |
| 1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
| 1 x | Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m) |
| 1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
| 1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
| 1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
| 1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
| 1 x | EME ignition free wheel |
| 1 x | Motor EME 35 cc with electric starter |
| 2 x | Piñon motor autostarter 35cc |
| 1 x | One Way bearing for EME55 starkit with key |
| 1 x | Propeller pad and output shaft EME 55/60 cc |
| 1 x | Motor EME 35 cc |
| 1 x | Piñon motor autostarter 60cc |
| 1 x | Motor EME 70 cc |
| 1 x | Pitts Mufflers EME 70 cc (2 pcs) |
| 1 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Sub-D Plug Mold |
| 1 x | Buy Perforated film 100 cm / 10 m |
| 2 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
| 1 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
| 1 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
| 1 x | Fiberglass heat shield Ø 8 mm 1000 mm |
| 1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
| 1 x | Cable Cargador FUTABA |
| 1 x | Green silicone 0,25 mm² wire (25 m) |
| 1 x | Protective Cover for wires Ø 6 mm 1000 mm |
| 1 x | Protective Cover for wires Ø 15 mm 1000 mm |
| 2 x | X-RAY Micro QR (Rudder) |
| 1 x | Glider STROLCH |
| 1 x | Lunak ARF 2000 mm Yellow (Hacker Model) |
| 1 x | Mini VISION "spread tow" CFK |
| 1 x | Motor EME 60 cc |
| 1 x | LA500 nose |
| 1 x | Raer wall |
| 1 x | Head lower part New |
| 1 x | LA500 rotor head core |
| 1 x | Piñon motor rotor LA-500 |
| 1 x | Head upper part |
| 1 x | TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible |
| 1 x | Side rudder |
| 1 x | Ferrita 17x10x6.5 mm |
| 1 x | Blade holder lower |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | Grub screw M3x3 shouldered (2 pcs) |
| 1 x | DJI FPV Combo |
| 1 x | Head spacer |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | Support pump Xicoy X45 |
| 1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
| 1 x | Aro pasacable Ø25 mm (4 pcs) |
| 1 x | Support Pitot JETI |
| 1 x | Support XT60 conector (2 pcs) |
| 1 x | Recessed MPX connector support (6 pcs) |
| 1 x | Support Filtro FESTO |
| 1 x | Support ECU Xicoy X-45 |
| 1 x | Tapa estado carga XT-60 (6 pcs) |
| 1 x | Angle support XT60 conector |
| 1 x | Soporte filtro FESTO (4 pcs) |
| 1 x | Soporte grifo FESTO (2 pcs) |
| 1 x | Aro pasacable Ø20 mm (4 pcs) |
| 1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | Electromotor starter EME 35cc |
| 1 x | Compact on-board starting system (9525) |
| 1 x | Wheel FEMA 165 mm / 8 mm |
| 1 x | Encendido CDI RCAME 1/4*32 Single 120º |
| 1 x | Landing gear axle Ø 6 mm (2 uds) |
| 1 x | Brake for 140 mm wheels |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
| 1 x | AL Axle Shaft 4.0x16 mm (2 uds) |
| 1 x | Quick hose connector 4-3 mm |
| 1 x | FESTO connector M7 Quick 6mm 90º |
| 1 x | FESTO connector M5 Quick 4 mm |
| 1 x | Servo holder for retract |
| 1 x | L-shaped servo mount |
| 1 x | DLE 30 complete electronic ignition |
| 1 x | Compact on-board starting system (9724) |
| 1 x | Wheel FEMA 90 mm / 6 mm |
| 1 x | Mudguard for 140/165 mm wheels |
| 1 x | Wheel FEMA 70 mm / 5 mm |
| 1 x | Wheel FEMA 152 mm / 8 mm |
| 1 x | Servo arm with 4 mm hole to FEMA 9810A |
| 1 x | Compact on-board starting system (9512) |
| 1 x | GLOW 5C + accesories |
| 1 x | Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC |
| 1 x | Distanzstück motor OS 120 AX |
| 1 x | Junta humo metalica G35 DLE35 |
| 1 x | Quick hose connector 3-3 mm |
| 1 x | FESTO connector M7 Quick 4mm 90º |
| 1 x | Festo 4mm Tubing Holder (10 uds) |
| 1 x | Racor 4/3 mm |
| 1 x | FESTO Blanking plug G1/8 |
| 1 x | FESTO connector M7 barb fitting 4mm |
| 1 x | Quick hose connector 6-6 mm |
| 1 x | FESTO connector M7 barb fitting 6mm |
| 2 x | TAKEO 3.6m electric |
| 1 x | Teacher-student connector T12FG/FX-30 |
| 1 x | Glider Ka 7 Red (2540mm) |
| 1 x | CDI EME 120cc |
| 1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 1 x | Blue silicone 0,5 qmm wire (50 m) |
| 1 x | Green silicone 0,25 qmm wire (50 m) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | Black spiral protective cover for wires Ø 0,5/50 mm - 25 m |
| 1 x | ABS 500 x 400 x 1,5 mm (white) |
| 1 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
| 1 x | Motor wall |
| 1 x | Motor Mega AC CAR 10 PRO |
| 1 x | RV-8 ARF 70cc rojo/blanco/azul |
| 1 x | CDI EME 55/60 cc |
| 1 x | Cylinder EME 35 cc |
| 1 x | ABS tube 18.0x16.0x1000 mm |
| 1 x | Aluminium ignition bad (red) |
| 1 x | Piston EME 35cc |
| 1 x | 50 mm servo arm with bearing (2 pcs) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | Protective Cover for wires Ø 3 mm 1000 mm |
| 1 x | JR silicone servo wire 0,35 qmm / 5m |
| 1 x | Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC |
| 1 x | Protective Cover for wires Ø 10 mm 1000 mm |
| 1 x | Fiberglass heat shield Ø 6 mm 1000 mm |
 |
| 14,715.76EUR |
