| 1 x | Straightened rod Ø 4.5 mm x 1000 mm |
| 1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 1 x | XH male balance (3S) connector (2 pcs) |
| 1 x | ABS tube 18.0x16.0x1000 mm |
| 1 x | Propeller balancer |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | Medidor ángulos y/o incidencias |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
| 1 x | Connectors DEANS (T) |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Truck-trailer for gliders 720 x 285 mm |
| 1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 1 x | Towing hook |
| 1 x | Bec MR UBEC 5A (5v/6v/7v) |
| 1 x | Jodel D.9 BeBe 2.400 mm Kit |
| 1 x | XH male balance (4S) connector (2 pcs) |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | ABS tube 5.0x4.0x156 mm |
| 1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
| 1 x | Recessed MPX connector support (6 pcs) |
| 1 x | Hot Glue Stick GREEN |
| 1 x | ULTIMATUM 2.0 m Red Bull |
| 1 x | Screwdriver for Torx® TX6 |
| 1 x | Propeller POWER-PROP 11x8 |
| 1 x | 20x1000 mm Ring Strap Back To Back |
| 1 x | Propeller APC 10x4.7 SF Pusher |
| 1 x | 2,5x60 mm allen screwdriver |
| 1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
| 1 x | Screwdriver for Torx® TX8 |
| 1 x | Propeller APC 10x6 Glow/Gas |
| 1 x | Propeller electric carbon 9.5x5 |
| 1 x | Vacuum pump 12 CFM |
| 1 x | SE Ring 400 mm (2 pcs) |
| 1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
| 1 x | Protective Cover for wires Ø 6 mm 1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | ABS tube 6.0x5.0x1000 mm |
| 1 x | ABS tube 3.0x2.0x330 mm |
| 1 x | TrainerCord (master-learner) |
| 1 x | Circlick securite |
| 1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | ABS tube 14.0x10.0x1000 mm |
| 1 x | Straightened rod Ø 1.2 mm x 1500 mm |
| 1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
| 1 x | Straightened rod Ø 1.5 mm x 1500 mm |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | Connectors banna oro 3 mm (M/F) |
| 1 x | ABS tube 10.0x8.0x1000 mm |
| 1 x | Fast'n EZ-CA-Hinge (12 uds) |
| 1 x | Wing connector 8pin with pin strip, plug & socket |
| 1 x | Straightened rod Ø 1.0 mm x 1000 mm |
| 1 x | Support ECU Xicoy X-45 |
| 1 x | Vasa model Catapult |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | 2,0x50 mm allen screwdriver |
| 1 x | ABS "T" angle 2.0x2.0x1000 mm |
| 1 x | Extinguisher CO2 - 2 Kg |
| 1 x | Interface Jack Adapter IKARUS |
| 1 x | Propeller APC 10x4.7 |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | Propeller electric carbon 6.5x4 |
| 1 x | |
| 1 x | ULTIMATUM 2.0 m yellow/blue |
| 1 x | Propeller POWER-PROP 13x9 Izda |
| 1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
| 1 x | Propeller POWER-PROP 10x6 |
| 1 x | Set transmisions ULTIMATUM 2.0 (stainless/aluminium) |
| 1 x | Rubber profile 8-2 mm 2M |
| 1 x | Fiberglass heat shield Ø 8 mm 1000 mm |
| 1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
| 1 x | SE Ring 330 mm (4 pcs) |
| 1 x | Propeller APC 11x10 Electric |
| 1 x | Propeller 9x7 SlowFlyer |
| 1 x | Propeller APC 12x4.5 MR |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | Propeller APC 10x3,8 SF Electric Pusher |
| 1 x | ABS angle 1.5x1.5x1000 mm |
| 1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
| 1 x | Xplorer4 anemometro |
| 1 x | Propeller 10x4,7 SlowFlyer |
| 1 x | Angle support XT60 conector |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
| 1 x | Black spiral protective cover for wires Ø 0,5/50 mm - 25 m |
| 1 x | Cross Connector 4.0 mm x 1000 mm |
| 1 x | Carbon fibre sandwich sheet 350x150x3 mm |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | Straightened rod Ø 6.0 mm x 1000 mm |
| 1 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 1 x | Angle measurer |
| 1 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 1 x | Connectors banna oro 2 mm (M/F) |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
| 1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
| 1 x | ABS tube 7.0x6.0x1000 mm |
| 1 x | Battery charging cable XT60 |
| 1 x | Propeller MEJZLIK 20x13 Electric light (41 g) |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | 15 mm reinforced hinge |
| 1 x | Brass rod Ø 0.8 mm x 1000 mm |
| 1 x | Connectors banna oro 0,8 mm (M/F) |
| 1 x | ABS tube 5.0x3.0x1000 mm |
| 1 x | Straightened rod Ø 4.0 mm x 1000 mm |
| 1 x | Pin type hinge Al 6x98 mm (2 pcs) |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
| 1 x | 30 cm DEANS female connector |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | ABS tube 9.0x7.0x1000 mm |
| 1 x | ABS tube 8.0x6.0x1000 mm |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | JETImodel SINGLE BEC |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | Field folding model stand |
| 1 x | Propeller balancer |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | Banna gold connector 2,5 mm (M/F) |
| 1 x | Connectors banna oro 3,5 mm (M/F) |
| 1 x | Propeller MEJZLIK 9,5x3 SF Carbon Indoor |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | Straightened rod Ø 1.5 mm x 1000 mm |
| 1 x | Long pinned hinge (6 uds) |
| 1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 1 x | Tow hook for tug |
| 1 x | MPX-Dean "T" Adapter |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | Gates hinge |
| 1 x | WingFix ULTRA Black Edition |
| 1 x | Straightened rod Ø 2.5 mm x 1000 mm |
| 1 x | Adjustable launching hook |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | Brass rod Ø 0.5 mm x 1000 mm |
| 1 x | XH female balance (3S) connector (2 pcs) |
| 1 x | 2 mm male connector (2 pcs) with safety connector |
| 1 x | USB HLS prog. interface |
| 1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 1 x | Conector Servo female 4 pines |
| 1 x | 30 cm BEC cable (female) |
| 1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 1 x | Waterproof adhesive tape, width 19mm, length 25m |
| 1 x | Propeller APC 12x6 Electric Pusher |
| 1 x | Propeller POWER-PROP 11x9 |
| 1 x | JR silicone servo wire 0,35 qmm / 5m |
| 1 x | Support Antena 2.4 Ghz (2 pcs) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | Ring 320 mm length (5 pcs) |
| 1 x | Propeller electric carbon 9.5x7 |
| 1 x | Propeller 8x4,3 SlowFlyer |
| 1 x | PROPELLER ELECTRIC glass 9,5x6 |
| 1 x | Propeller APC 10x10 Electric |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT |
| 1 x | Propeller APC 10x5.5 MR Electric multirrotor PUSHER |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Protective open Cover for wires Ø 13 mm 1000 mm |
| 1 x | Green silicone 0,25 mm² wire (25 m) |
| 1 x | SE Ring 350 mm (2 pcs) |
| 1 x | SE Ring 480 mm (2 pcs) |
| 1 x | Bungee HLG Premium |
| 1 x | Propeller electric carbon 10.5x8 |
| 1 x | Wings Bags JEEMO |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
| 1 x | Set transmisions ULTIMATUM 2.0 (dura/aluminium) |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Starter EM Gear Power 250 |
| 1 x | ABS 500 x 400 x 2,0 mm (white) |
| 1 x | Propeller APC 10x4.5 MR Electric Pusher |
| 1 x | Propeller APC 10x6 Electric Pusher |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | Propeller APC 11x7 Electric |
| 1 x | Slave-cable USB Easy Sim |
| 1 x | Profile ABS triangular 2.0x1000 mm 90º |
| 1 x | Support conector MPX (6 pcs) |
| 1 x | Tank ULTIMATUM 2.0 (3.2 L) + Smoke (0.9 L) PRO |
| 1 x | Propeller APC 10x7 Electric |
| 1 x | Z Bender - S Type Tool |
| 1 x | Crimping tool |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 1 x | Propeller electric carbon 8.5x7 |
| 1 x | 5 line servos wire black (1 m) |
| 1 x | Propeller electric carbon 8.5x6 |
| 1 x | ABS "T" angle 6.0x6.0x1000 mm |
| 1 x | Disposable Injector Bags (30x16cm) 100 pcs |
| 1 x | Rubber profile 6-2 mm 2M |
| 1 x | Protective Cover for wires Ø 6 mm 1000 mm |
 |
| 12,839.07EUR |
