| 1 x | Stickers-digit for marking |
| 2 x | Servo NARO Max Std |
| 2 x | |
| 1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
| 1 x | Hot Glue Stick RED |
| 1 x | Digital scale up to 40 kg |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
| 1 x | |
| 1 x | Z Bender - S Type Tool |
| 1 x | Starter EM Gear Power 80 |
| 1 x | Hot Glue Stick BLACK |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 1 x | Starter Sullivan-STAR 603 DINATRON |
| 2 x | Ball Link Plier |
| 1 x | Screwdriver for Torx® TX8 |
| 2 x | Dust collector for mould cleaning |
| 1 x | Starter Sullivan-STAR 601 |
| 2 x | Hexagonal ball head 2.0 x 50 mm |
| 1 x | Vacuum pump 12 CFM |
| 2 x | 2,0x50 mm allen screwdriver |
| 1 x | Screwdriver for Hexagon 1,27mm |
| 1 x | Starter EM Gear Power 250 |
| 1 x | 3,0x60 mm allen screwdriver |
| 2 x | Cut tube |
| 1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
| 1 x | 2,5x60 mm allen screwdriver |
| 1 x | Starter 12v (Max 180 and 30ccm) |
| 1 x | Screwdriver for Torx® TX6 |
| 1 x | Vacuum pump P1-N |
| 1 x | Copier 5x20 cm pcs |
| 1 x | Hot Glue Stick GREEN |
| 1 x | Copier 2x20 cm pcs |
| 1 x | Z Bender - S Type Tool |
| 1 x | Crimping tool |
| 1 x | ABS tube 3.0x1.0x1000 mm |
| 1 x | Set cintas unión paracaídas 145 cm |
| 1 x | MAX pilot ARTF |
| 1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 2 x | Windsock Ozone L - 700 mm |
| 1 x | ABS tube 9.0x8.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | ABS tube 10.0x8.0x1000 mm |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Paramotor Trike XL |
| 1 x | Paramotor BackPack XXS (without accessories) |
| 1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | ABS tube 9.0x7.0x1000 mm |
| 1 x | Para-RC Trike "RC-Bullix" |
| 2 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 2 x | Parachute P4 |
| 2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 5 x | Canopy Latch |
| 1 x | Pilot "Dick" Legends Series (Slimline) |
| 1 x | Profile ABS half cane 2.5x1000 mm |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
| 1 x | Connector CAN 15 |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | Extension MPX-MPX 20 cm |
| 1 x | Balsa panel 2.0x100x1000 mm |
| 1 x | Green smoke canister 140 g |
| 2 x | Straightened rod Ø 1.5 mm x 1000 mm |
| 1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
| 1 x | Sealing Iron Profi LCD |
| 1 x | Kwik link unmount tool |
| 1 x | Roller cutter 28 mm |
| 1 x | |
| 1 x | Tube support Ø 6mm (10 pcs) |
| 1 x | Rocket D9-7 |
| 1 x | Support conector MPX (6 pcs) |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | Allen wheel collar M3x5 |
| 2 x | Aluminun wheel collar 5 mm Ø (4 uds) |
| 2 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Servo KST BLS815 HV V2.0 Servo 20mm 70g 20Kg |
| 2 x | Soporte servo KST X08/H and Plus |
| 1 x | 80 mm rods set for direction control |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 2 x | Servo KST DS125MG servo ala 10mm 28g 7Kg |
| 2 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 2 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
| 2 x | LUCAS pilot ARTF |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | Servo KST HS08A Wing Servo - 5.2Kg.cm 0.11s 11.0g 8mm |
| 1 x | 28x5 mm wires output (2 pcs) |
| 1 x | Landing gear frontal support 29x26x13,5 |
| 2 x | Paramotor Kit Camo H1.5/ Ben Red |
| 2 x | Allen wheel collar M4x4 |
| 1 x | 45 mm rods + T patellas set for direction control |
| 1 x | AXI 2204 Multicopter |
| 2 x | Cockpit plastic closing |
| 1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
| 1 x | Servo GO-12S69MG 26kg.cm 0.10s/60º |
| 2 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | T-Motor U7-V2.0 Kv420 |
| 1 x | Servo KST BLS915 HV V8.0 25Kg 20mm 78g |
| 2 x | Opale Rucksack |
| 1 x | Servo KST X10-710 V8.0 7.5Kg HV |
| 1 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
| 1 x | Quadcopter Q50 Kit Carbon Fiber |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 2 x | Cable grommet Ø 3.2 mm (4 uds) |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 1 x | Servo GO-1053MG 20 kg.cm 0.17s/60º |
| 2 x | 11 mm Rubber pads (14 pcs) |
| 1 x | Control for forward wheel (MINI) |
| 1 x | Cable grommet Ø 6.4 mm (4 uds) |
| 1 x | Soporte servo KST X10 mini / DS135MG |
| 1 x | Snap pin for micro clevis (10 uds) |
| 1 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th |
| 1 x | 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti |
| 1 x | Wing OXY 0,5 pulgadas2 |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | Spare Part Frame Set for EACHINE RACER 250 |
| 2 x | Split pin 1x8 mm (10 uds) |
| 1 x | Servo GO-1023MG 7.0 kg.cm 0.09s/60º |
| 1 x | Servo SAVOX SA-1256 TG |
| 1 x | Servo SAVOX SH 0257 MG |
| 1 x | ALU servo arm 90º 3 mm shaft |
| 1 x | ALU double servo arm 3 mm shaft |
| 1 x | XH 30 cm Male extension 0,25 mm2 silicone cable for 3 cell |
| 1 x | Fiberglass heat shield Ø 4 mm 1000 mm |
| 1 x | Silicone black 0,75 qmm cable ( 1 m) |
| 1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell |
| 1 x | XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell |
| 1 x | Protective Cover for wires Ø 15 mm 1000 mm |
| 1 x | ABS Strip 1.5x8.0x1000 mm |
| 2 x | Aluminun wheel collar 6 mm Ø (4 uds) |
| 1 x | Festo 4mm Tubing Holder (10 uds) |
| 1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
| 1 x | Brass rod Ø 0.8 mm x 1000 mm |
| 1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
| 1 x | Straightened rod Ø 5.5 mm x 1000 mm |
| 1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
| 1 x | ALU servo arm 3 mm shaft |
| 1 x | Servoarm Aluminium SH-82 |
| 1 x | EC-Cutter |
| 1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
| 1 x | Pump hose (Ø 6/8 mm) transparent |
| 1 x | Foam air filter Ø 48 mm, blue |
| 1 x | Boxed KIT OF 7 Rotary Burrs FINE |
| 1 x | Propeller diller for DLE111 and DA85-150 |
| 1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
| 1 x | ABS Strip 1.5x2.0x1000 mm |
| 2 x | Window mounting channel Type H 2.5x0.5 (2 m) |
| 1 x | Aluminium wide washer M3 red (4 pcs) |
| 1 x | One touch canopy lock |
| 1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
| 1 x | Silicone black 0,75 qmm wire ( 25 m) |
| 1 x | Straightened threaded rod M2-1m |
| 1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 1 x | Pushrod octagone 3/2 with coupler M2 |
| 1 x | Landing gear frontal support 25x32x16 |
| 1 x | Birch plywood plate 600x300x1.2 mm |
| 1 x | SUS wire 3m (nylon coated) |
| 1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
| 1 x | L-Connector 1.5 mm x 1000 mm |
| 1 x | Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13 |
| 1 x | Aluminium cap bolt washer M3 black (8 pcs) |
| 1 x | Concave-Convex sandpaper file 13 mm |
| 1 x | Wheel collar 4 mm Ø (4 uds) |
| 1 x | Aluminium wide washer M4 Gold (4 pcs) |
| 2 x | Wheel collar 3.5 mm Ø (4 uds) |
| 1 x | Rigid coupling brass Ø 5 mm L: 25 mm |
| 1 x | Pushrod greyline 3/2 with coupler M2 L: 1000 mm |
| 1 x | Wing OXY 5,0 m2 |
| 1 x | 41x5,5 mm wires output (2 pcs) |
| 1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
| 1 x | Wing bolts M3 Steel screw Red (2 pcs) |
| 1 x | Aluminium wide washer M3 blue (4 pcs) |
| 1 x | Servo KST MS825 V8.0 35kg 8.4v |
| 1 x | Rescue 1,8m2 / BackPack |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Charger SKY RC e680 |
| 1 x | Rigid coupling brass Ø 4 mm L: 25 mm |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Window mounting channel 5m |
| 1 x | Spare Shaft Ø4mm L:450x23mm M4 |
| 1 x | Antenna Hole Cap V1 (Silver) |
| 1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
| 1 x | Spare Shaft Ø4mm L:450x18mm M4 |
| 1 x | Aluminium cap bolt washer M4 green (8 pcs) |
| 1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
| 1 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
| 1 x | Windsock Ozone L -1200 mm |
| 1 x | Covered closure or fairings |
| 1 x | Snap for floding prop for 2 mm axi |
| 1 x | Split M1,2x10 (10 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
| 1 x | Aramid 50 daN 50 m |
| 1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
| 1 x | Tip wing protector 40x14 (2 pcs) |
| 1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
 |
| 10,184.35EUR |
