3 x | Hovercraft sailcloth |
2 x | Servo NARO Max Std |
2 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
1 x | Softshell Hispano Aviación |
2 x | Green smoke canister 65 g |
1 x | XH female balance (5S) connector (2 pcs) |
1 x | XH female balance (4S) connector (2 pcs) |
1 x | 10 mm Prop Adapter M12 |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Ball Link Plier |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | XH male balance (5S) connector (2 pcs) |
1 x | VBar NEO VLink 6.x Express, neon-yellow |
2 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | Propadapter for motor A50-V3 |
1 x | Propeller diller for EME35 and DLE35 |
2 x | |
2 x | Tacometer mini ignition RCEXL |
1 x | Connector CAN 15 |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | CC 01 |
1 x | 2,3 mm Prop Adapter M6 |
1 x | 1/10 Pilot "Jack" |
2 x | Truck-trailer for gliders 720 x 239 mm |
2 x | ABS 500 x 400 x 1 mm (white) |
2 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
2 x | Pilot "Anthony" (Slimline) |
1 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | Ball Link ALU M3 - RH (1 pcs) |
1 x | Angle measurer |
1 x | Cable coupler M2x66 (2 uds) |
2 x | Marker ties (20 pcs) |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Horn 5/15 with M2 Bearing |
2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
2 x | 20x1000 mm Ring Strap Back To Back |
1 x | Actuador lineal HLS12-100210-7.4v |
1 x | Crimping tool |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
2 x | Pasacables rectangular 40x15 mm (4 pcs) |
2 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Cable coupler M2,5 (2 pcs) |
2 x | Tape GFK 25 mm |
1 x | "L" servo arm 65x49 mm (2 pcs) |
1 x | 3 LiPo XH>EH adapter |
1 x | 1/7 Pilot "Japanese" |
3 x | Piloto jet 130 mm |
1 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | 3.2 mm Prop Adapter M8 |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | Bungee HLG Premium |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
2 x | Aramid fibre shears Proton®, 21 cm / 8" length |
1 x | Sun Cover PC 21 XXL (JMB Jets) |
2 x | Support XT60 conector (2 pcs) |
1 x | 29,0 mm propeller (rigth propeller) |
1 x | Parachute expulsion foam |
2 x | Aro pasacable Ø20 mm (4 pcs) |
2 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | ESC Actro-Marine 30A |
1 x | Starter EM Gear Power 80 |
1 x | 18x8 BIELA propeller |
1 x | 18x10 BIELA pusher propeller |
1 x | Filler Gauges |
1 x | DLA 116 crankshaft |
1 x | Propeller diller for DLE170 |
1 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
1 x | Xoar Electric Beechwood Prop 21x10 |
1 x | Propeller POWER-PROP 11x9 |
1 x | Propeller POWER-PROP 13x10 |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | 12 mm mast holder |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Welder 100W/200V |
1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | Medidor ángulos y/o incidencias |
1 x | Red smoke canister 65 g |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
2 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
2 x | Field folding model stand |
1 x | B4-0 rocket charges (6 pcs) |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | Styrene plate 320x120x0.5 mm |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | White smoke bombs AX-9 (10 pcs) |
1 x | Peel ply 93 g/m² (plain weave) 150 cm x 5m |
1 x | Z Bender - S Type Tool |
1 x | Vacuum pump 12 CFM |
1 x | Starter EM Gear Power 250 |
1 x | FIALA Propeller 24x10 |
1 x | 17x8 BIELA propeller |
1 x | 23x8 BIELA propeller |
1 x | Propeller diller for DA50, DLE55 red |
1 x | Propeller diller for DLE111 and DA85-150 |
1 x | Adapters for 7.5 - 35cc aircraft and naval engines |
1 x | |
1 x | Xoar Electric Beechwood Prop 12x6 |
1 x | Porpeller HUNTER 400 |
1 x | Propeller POWER-PROP 10x6 |
1 x | White smoke bombs AX-18 (5 pcs) |
2 x | Glass fibre braided sleeve (45mm) roll 10m |
1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | 3,2 mm Prop Adapter M6 |
1 x | "M" set |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
1 x | 3.2 mm Prop Adapter M6 |
1 x | 3,2 mm Prop Adapter M8 |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | silverlot 45% - 1,50x500 mm solder rods (2 pcs) |
1 x | 290 mm 8x4 M4 shaft ship |
1 x | Peel ply 95 g/m² (plain weave) 100 mm x 100 m |
1 x | Peel ply 100 g/m² (plain weave) 50 cm x 2m |
1 x | Kwik link unmount tool |
1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m Aero Finish |
2 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
3 x | Civilian pilot "Joe" size 9cm (Slimline) |
3 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
2 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | Buy Perforated film 100 cm / 10 m |
1 x | SE Ring 450 mm (2 pcs) |
3 x | Piloto JET 1:3,5 |
2 x | Aluminium sheet 500x250x0,5mm |
2 x | FOAM - CURE™ (24g) |
2 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 10m |
2 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
3 x | 1/6 Pilot "John" |
2 x | SE Ring 360 mm (2 pcs) |
2 x | Recessed MPX connector support (6 pcs) |
2 x | UHU hart 35 g |
2 x | 1/10 Pilot "Jimmy" |
1 x | Chopped glass fibre strands 3 mm |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Glass fibre braided sleeve (45mm) roll 20m |
1 x | Red smoke canister 100 g |
1 x | Angle of incidence meter |
1 x | Tachometer Hyperion Multi-pala |
1 x | Yellow smoke canister 100 g |
1 x | 28 mm turnbuckle |
1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
1 x | Sealing Iron Sleeve PROF |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | 3 mm Prop Adapter M6 |
1 x | 15x7 tree blades propeller LEFT |
1 x | Styrene plate 320x120x1.0 mm |
1 x | 3l Smoke oil |
1 x | 25,0 mm 3-BL M4 hydro-propeller (left hydropropeller) |
1 x | Parachutist |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
1 x | "S" set for boats |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Glass fibre sleeve Ø 20 mm |
1 x | 10x7 tree blades propeller |
1 x | WingFix ULTRA Black Edition |
1 x | Fiberglass 25 g/m² 5000x1270 mm |
2 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
1 x | Glass fabric 49 g/m² (1,27 x 20 m) |
2 x | Tube Pitot to PIXHAWK |
1 x | 1/4 Pilot "Mike" |
1 x | PIX Hawk with accesories |
1 x | Cinta Goldfix 1m |
1 x | Fibra de vidrio 100 g/m² (50 m x 100 cm) |
1 x | Fiberglass 280 g/m² 5000x1000 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
2 x | PPM Encoder Module |
1 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
1 x | 1/6 Pilot "Tony" |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 5 m |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Carbon Non-Woven, 245 g/m² 125 cm x 20 m |
1 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
1 x | Glass fabric 49 g/m² (1,27 x 5 m) |
2 x | 1/12 Pilot "Fighter" |
1 x | Support Pitot JETI |
1 x | 1/4 Pilot "Heidi" |
1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 50m |
2 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | SE Ring 240 mm (2 pcs) |
1 x | Tape GFK 50 mm |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | Spikes Band (5 m) |
1 x | 20x200 mm battery rings |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | Support ECU Xicoy X-45 |
1 x | Support FUEL DOT V3 |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | SE Ring 400 mm (2 pcs) |
1 x | Support pump Xicoy X45 |
1 x | SE Ring 350 mm (2 pcs) |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
1 x | Heat-conducting adhesive (2x2ml), WLK DK 4 |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | SE Ring 250 mm (2 pcs) |
1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 10m |
2 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | 1/12 Pilot "Cougar" |
1 x | Pegamento Pu R 50g polyuretano |
1 x | Regulador Hobbywing Platinum 260A HV SBEC V5 |
1 x | Glass fabric 390 g/m² (silane, twill) 100 cm x 20m |
2 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
2 x | Pilot "Dick" Legends Series (Slimline) |
1 x | Support conector MPX (6 pcs) |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | Pilot "Duke" Legends Series (Slimline) |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
2 x | 1/6 Pilot "Cindy" |
2 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | Fibra de vidrio 80 g/m² (10 m x 100 cm) |
1 x | Foil for sticking flaps and ailerons |
1 x | SE Ring 480 mm (2 pcs) |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | 1/12 Pilot "Langley" |
1 x | Support Filtro FESTO |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
1 x | Support pumb/filter Xicoy X45 |
1 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | Fiberglass 163 g/m² 1m x 5 m (Twill) |
1 x | Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain) |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | Glass fabric 49 g/m² (1,27 x 10 m) |
|
15,717.68EUR |