4 x | Parachute BACKUP X100 |
3 x | Parachute PV6 for F3J |
3 x | Paramotor Kit Camo H1.5/ Ben Red |
2 x | Propeller balancer |
2 x | LUCAS pilot ARTF |
1 x | Opale Rucksack |
1 x | Wing OXY 0,5 pulgadas2 |
1 x | Windsock Ozone L - 700 mm |
1 x | WingFix ULTRA Black Edition |
1 x | Trike XL motor set (motor+esc+prop) |
2 x | Angle measurer |
1 x | Paramotor BackPack XXS (without accessories) |
2 x | Angle of incidence meter |
1 x | Truck-trailer for gliders 720 x 285 mm |
2 x | Surface Indicator Gauge Small |
3 x | Para-RC Mix |
3 x | Paramotor Trike XL |
1 x | Aramid 50 daN 50 m |
1 x | Para-RC Trike "RC-Bullix" |
2 x | Paramotor BackPack XXS 2 |
2 x | Medidor ángulos y/o incidencias |
2 x | Field folding model stand SebArt |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
2 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | 20x200 mm battery rings |
2 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
1 x | Cross Connector 4.0 mm x 1000 mm |
2 x | Tape GFK 50 mm |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
2 x | Foil for sticking flaps and ailerons |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | ABS angle 5,0x5,0x1000 mm |
1 x | SE Ring 450 mm (2 pcs) |
1 x | Profile ABS Square 4 x 1000 mm |
2 x | SE Ring 300 mm (2 pcs) |
1 x | Profile ABS Square 1 x 1000 mm |
3 x | Servo NARO Max Std |
3 x | Tape GFK 25 mm |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | Marker ties (20 pcs) |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
2 x | ABS angle 1.5x1.5x1000 mm |
1 x | Tube Pitot to PIXHAWK |
1 x | PIX Hawk with accesories |
1 x | PPM Encoder Module |
1 x | Oracover Black 2 m |
1 x | Oracover CARBON Metalic 1 m |
1 x | Ply-Span 450x600/13g White |
1 x | MYLAR film A350 (1000x500 mm) |
2 x | Papel japones 12 grs/m2 760x510 mm JAPICO |
1 x | Oracover Red 2 m |
1 x | Oracover Verde 2 m |
1 x | ORACOVER transparent Yellow (10 m) |
1 x | ORACOVER Fluor red (2 m) |
1 x | Ply-Span 450x600/13g Orange |
1 x | Monokote PLATINO metalizado (1.8x0.65m) |
1 x | MPX Sub-D Adaptor |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Lock washer 2.7 mm (20 pcs) |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | Towing hook <3m |
1 x | Long ball link M2 (6 uds) |
1 x | White smoke canister 65 g |
1 x | Initior Transmitter FTX2 Wireless |
1 x | Blue smoke canister 140 g |
1 x | Glases Nimbus "Black" |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi |
2 x | Windsock Ozone L -1200 mm |
1 x | Ballast 700gr OPALE |
3 x | Para-RC "RC-Evo-Cross" Rescue |
1 x | 3,2 mm Prop Adapter M5 |
1 x | 3 mm Short Prop Adapter M5 |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Steering arm 12 mm Ø 4 mm |
3 x | PVC blue transparent battery termo-retract 95 mm (1 m) |
1 x | PVC termo-retract battery 45 mm black transparent (1 m) |
1 x | 4 mm Prop Adapter M8 |
1 x | 3.2 mm Prop Adapter M6 |
1 x | 2 mm Prop Adapter M6 |
1 x | Prop Shaft Adapter 8 mm/M12 "long" |
2 x | 4 mm Prop Adapter M6 |
1 x | Prop Shaft Adapter 4 mm/M8 "long" 35 mm |
1 x | Rescue 1,8m2 / BackPack |
1 x | 4 mm Prop Adapter M8 |
1 x | Parachute P4 |
1 x | 3 mm Prop Adapter M6 |
1 x | 3,2 mm Prop Adapter M6 |
3 x | 3.17 mm Prop Adapter CN-Spinner |
1 x | U Profile ABS 3,0x6,0x1000 mm |
2 x | |
1 x | SE Ring 480 mm (2 pcs) |
1 x | SE Ring 350 mm (2 pcs) |
1 x | SE Ring 330 mm (4 pcs) |
1 x | Rubber profile 10-2 mm 2M |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | White gelcoat 1 Kg |
2 x | Hardener P-25, canister 2.5Kg |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
1 x | Mould Resin P 10 kg |
1 x | Profile ABS half cane 4x2.5x1000 mm |
2 x | Ring 320 mm length (5 pcs) |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
2 x | SE Ring 400 mm (2 pcs) |
2 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
1 x | Hovercraft sailcloth |
2 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | SE Ring 250 mm (2 pcs) |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
2 x | |
1 x | SUS wire 3m (nylon coated) |
1 x | Oracover White 10 m |
2 x | PVC yellow transparent battery termo-retract 68 mm (1 m) |
1 x | Oracover Orange 2 m |
2 x | 3,2x1000 mm 2:1 black termoretract tube |
3 x | 2,4x1000 mm 2:1 green termoretract tube |
2 x | 2,4x1000 mm 2:1 red termoretract tube |
1 x | Oracover CHROME 2m |
2 x | 6,4x1000 mm 2:1 black termoretract tube |
2 x | 1,2x1000 mm 2:1 red termoretract tube |
2 x | 6,4x1000 mm 2:1 green termoretract tube |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | 1,6x1000 mm 2:1 red termoretract tube |
3 x | PVC yellow transparent battery termo-retract 69 mm (10 m) |
2 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | ORACOVER Ferrari red (2 m) |
1 x | LOWER TOW HOOK |
1 x | Tube support Ø 6mm (10 pcs) |
1 x | Support Filtro FESTO |
2 x | 9x4.7 * 22x12 carbon propeller |
1 x | Recessed MPX connector support (6 pcs) |
1 x | Soporte filtro FESTO (4 pcs) |
2 x | Aro pasacable Ø25 mm (4 pcs) |
3 x | Soporte grifo FESTO vertical (1 pcs) |
2 x | Support pumb/filter Xicoy X45 |
1 x | MAX pilot ARTF |
1 x | Support FUEL DOT V3 |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Angle support XT60 conector |
1 x | Support XT60 conector (2 pcs) |
3 x | SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm |
1 x | EDGE 540-A 105" (2660 mm) |
3 x | SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm |
2 x | resin-hardener package L-385 with hardener H-385 (3.5 Kg) |
1 x | 3,2 mm Prop Adapter M8 |
1 x | 3,2 mm Prop Adapter M6 |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | 3 mm Prop Adapter M6 |
1 x | resin-hardener package L-385 with hardener H-385 (875 g) |
1 x | MEKP Harderner 100 g |
1 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
1 x | Profile ABS half cane 2.0x1000 mm |
1 x | PVC transparent black termo-retract battery 185 mm (1 m) |
1 x | Oratex Red Fokker 10 m |
1 x | Ply-Span 450x600/13g Black |
1 x | Oracover Yellow CADMIO 10 m |
2 x | Oratex Antik 2m |
1 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
1 x | 6 mm Prop Adapter M8 |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | resin-hardener L-385 H-385 (625 g) |
1 x | Hardener Aero EPH 161 (500 g) |
1 x | Mould Resin P + Hardener EPH 161-P, kit/ 585 g |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
1 x | resin-hardener L-385 H-385 (1250 g) |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 675g |
1 x | resin-hardener package L-385 with hardener H-385 |
1 x | Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g |
1 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
1 x | resin-hardener L-385 H-385 (5000 g) |
1 x | Profile ABS half cane 8.0x1000 mm |
1 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | Oracover Black 10 m |
2 x | PVC transparent battery termo-retract 85 mm (1 m) |
1 x | PVC yellow-orange transparent battery termo-retract 57 mm (1 m) |
3 x | Cable grommet Ø 3.2 mm (4 uds) |
2 x | Cockpit metalic closing |
2 x | Cockpit aluminium closing 4.7g |
2 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
1 x | 45 mm rods + T patellas set for direction control |
2 x | SIG Coverall 1.2x1.8 m |
2 x | Window mounting channel Type H 2.5x0.5 (2 m) |
2 x | Steering arm 16 mm Ø 3 mm |
2 x | 80 mm rods set for direction control |
2 x | Locking cable tie 2.5x100 (uds) |
2 x | Solarfilm Lite blue transp. 5m |
2 x | 6,4x1000 mm 2:1 blue termoretract tube |
2 x | 140 mm rods set for direction control |
3 x | Cable grommet 9.5 mm (4 uds) |
1 x | Tip wing protector 40x14 (2 pcs) |
1 x | 6,4x1000 mm 2:1 red termoretract tube |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Propeller APC 11x7 Electric |
1 x | Propeller APC 11x4.7 SF |
1 x | SCANNER 46-55 Sport Scale 1:7 ARF |
1 x | Oratex Yellow Cub 10 m |
2 x | PVC termo-retract battery 45 mm transparent orange (1 m) |
1 x | SIG Coverall 1.2x0.9 m |
1 x | Oracover Yellow CADMIO 2 m |
2 x | Oratex White 2m |
1 x | Oracover light Grey 2m |
1 x | 2,4x1000 mm 2:1 black termoretract tube |
2 x | Lead with adhesive (2 pcs) |
1 x | Wing bolts M6 Steel screw Red (2 pcs) |
1 x | 19 mm 2:1 black termoretract tube |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Triple rod con. 2mm Pushrod (2 pcs) |
1 x | Landing gear frontal support 25x32x16 |
1 x | 140 mm rods + T patellas set for direction control |
2 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | PVC transparent battery termo-retract 51 mm (1 m) |
1 x | Cockpit latch closing I=10 mm |
3 x | Snap pin for micro clevis (10 uds) |
1 x | 28x5 mm wires output (2 pcs) |
1 x | PVC blue transparent battery termo-retract 68 mm (10 m) |
1 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | 250 mm / 16 mm Airbrakes |
1 x | 100 mm rods + T patellas set for direction control |
1 x | 12.7 mm 2:1 black termoretract tube |
1 x | PVC transparent red battery termo-retract 68 mm (10 m) |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Allen wheel collar M3x3 |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | PVC lilac battery termo-retract 70 mm (10 m) |
1 x | Propeller APC 10x5.5 MR Electric multirrotor |
1 x | Propeller APC 11x8.5 Electric |
1 x | RCEXL Pump |
1 x | Battery PowerPack 2.5x2 ECO |
1 x | Cockpit aluminium closing 5.4g |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | Clip fixing for wing (2 pcs) |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | 100 mm rods set for direction control |
2 x | Snap for floding prop for 2 mm axi |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | 4,8x1000 mm 2:1 black termoretract tube |
1 x | Cockpit plastic closing |
1 x | Landing gear frontal support 29x26x13,5 |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Allen wheel collar M4x6 |
1 x | Control for forward wheel (MINI) |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Split M1,2x10 (10 pcs) |
1 x | Triple rod con. 3mm Pushrod (2 pcs) |
1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Tip wing protector 30x10 (2 pcs) |
1 x | PVC yellow battery termo-retract 69 mm (10 m) |
1 x | PVC red battery termo-retract 68 mm (10 m) |
2 x | Snap long M2 (10 uds) |
1 x | Cockpit aluminium closing |
1 x | 90 mm rods + T patellas set for direction control |
1 x | Covered closure or fairings |
1 x | Allen wheel collar M3x5 |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | PVC termo-retract battery 95 mm blue transparent (1 m) |
2 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
1 x | 3,2x1000 mm 2:1 red termoretract tube |
1 x | PVC transparent battery termo-retract 70 mm (10 m) |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Propeller APC 10x5 Electric Pusher |
1 x | Propeller APC 10x7 Electric |
1 x | Propeller APC 10x4.5 MR |
1 x | Propeller APC 11x10 Electric |
1 x | Propeller APC 10x6 Electric Pusher |
1 x | Propeller APC 12x10 Electric |
1 x | Propeller APC 10x6 Electric |
1 x | Propeller APC 10x3,8 SF Electric Pusher |
1 x | Cessna SKYLANE T182 1.75m - Seagull Model |
1 x | SkyMaxx 1.550 mm (kit) |
1 x | BOOMERANG II 40/46 ARF 1.55mm |
1 x | TRAINER RC Pilot V2 90" w/r ARF |
|
28,808.77EUR |