| 1 x | Ferrita 17x10x6.5 mm |
| 1 x | Ferrita con funda |
| 1 x | Ferrita 14x8x5.5 mm |
| 1 x | Spinner 40 mm Black (Kavan) |
| 2 x | 75 mm spinner (Carbon Imitation) |
| 2 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
| 1 x | Z Bender - S Type Tool |
| 2 x | Spray adhesive AEROFIX 2 |
| 1 x | Spray EC Red 400ml |
| 1 x | Screwdriver for Hexagon 1,27mm |
| 1 x | Ball Link Plier |
| 1 x | 500 ml sealer (DOPE) |
| 2 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
| 1 x | Screwdriver for Torx® TX8 |
| 2 x | Release wax 250ml |
| 1 x | Painting GHT Lexan Black 150 ml |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | Screw-lock connector M2 (2 uds) |
| 1 x | Locking cable tie 4.6x203 (uds) |
| 1 x | Cierre cabina aluminio Ø4, I=10 mm |
| 1 x | Covered closure or fairings |
| 1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 1 x | Parachute BACKUP X100 |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | 25 mm reinforced hinge |
| 2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 1 x | Fast'n EZ-CA-Hinge (12 uds) |
| 1 x | Ballast 700gr OPALE |
| 1 x | Paramotor Trike XL |
| 1 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | Para-RC Trike "RC-Bullix" |
| 1 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 1 x | BALSA triangular 10x10x1000 mm |
| 1 x | Windsock Ozone L - 700 mm |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | Pine wood slat 5.0x5.0x1000 mm |
| 1 x | Set cintas unión paracaídas 145 cm |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | Flap hinge (6 pcs) |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | Flap hinge 33x9 mm (6 pcs) |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 1 x | Opale Rucksack |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | Para-RC "RC-Evo-Cross" Rescue |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Paramotor BackPack XXS (without accessories) |
| 1 x | Aramid 50 daN 50 m |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 1 x | Micro flex hinge (12 uds) |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | Long pinned hinge (12 uds) |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | 18 mm reinforced hinge |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | Gates hinge black 30x16 mm (2 pcs) |
| 1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Para-RC Mix |
| 1 x | Wing OXY 0,5 pulgadas2 |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | MAX pilot ARTF |
| 1 x | Wing OXY 5,0 m2 |
| 1 x | Flat Connector 4.0 mm x 1000 mm |
| 1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
| 1 x | U Profile ABS 1,0x2,0x1000 mm |
| 1 x | Profile ABS Square 3 x 1000 mm |
| 2 x | U Profile ABS 2,0x4,0x1000 mm |
| 1 x | U Profile ABS 8,0x4,0x1000 mm |
| 1 x | Profile ABS Square 2 x 1000 mm |
| 1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
| 1 x | L-Connector 4.0 mm x 1000 mm |
| 1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
| 1 x | ABS angle 2,0x2,0x1000 mm |
| 1 x | U Profile ABS 3,0x6,0x1000 mm |
| 1 x | ABS angle 10,0x10,0x1000 mm |
| 1 x | ABS angle 1.5x1.5x1000 mm |
| 1 x | ABS angle 5,0x5,0x1000 mm |
| 1 x | U Profile ABS 5,0x10,0x1000 mm |
| 1 x | Profile ABS Square 1 x 1000 mm |
| 1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
| 1 x | L-Connector 1.0 mm x 1000 mm |
| 1 x | Profile ABS half cane 3x1000 mm |
| 1 x | ABS angle 6,0x6,0x1000 mm |
| 1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
| 1 x | Support pump Xicoy X45 |
| 1 x | Soporte filtro FESTO (4 pcs) |
| 1 x | Carbon plate 350x150x3.0 mm |
| 1 x | Spinner 55 mm White (Kavan) |
| 1 x | Balsa panel 1.0x100x1000 mm |
| 1 x | ABS "T" angle 8.0x8.0x1000 mm |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Gates hinge 30x16 mm (2 pcs) |
| 1 x | Hot Glue Stick BLACK |
| 1 x | Kwik link unmount tool |
| 1 x | Partall paste 650 g |
| 1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | Universal Filter |
| 1 x | 1000 ml sealer (DOPE) |
| 1 x | Spray adhesive INFUTAC (Clear) 500 ml |
| 1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
| 1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
| 1 x | Universal Colour Paste white 50 g |
| 1 x | 2,5x60 mm allen screwdriver |
| 1 x | Precision wrench L100 mm |
| 1 x | |
| 1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
| 1 x | 12 mm portholes (10 pcs) |
| 1 x | F3A carbon 75 mm spinner for Hacker C-50 |
| 1 x | 39,0 mm propeller (rigth propeller) |
| 1 x | Spinner 82mm Black ventilado |
| 1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
| 1 x | 31,0 mm propeller (rigth propeller) |
| 1 x | 29,0 mm propeller (rigth propeller) |
| 1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
| 1 x | 28 mm turnbuckle |
| 1 x | 70 mm INO spinner (carbon imitation) |
| 1 x | Spinner Alumin. fixed propeller 45 mm / 5,0 mm |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | 36,0 mm propeller (rigth propeller) |
| 1 x | Spinner INO 82 mm Chrome (Imitacion metal) |
| 1 x | Spinner Alumin. fixed propeller 50 mm / 3,2 mm |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | 25,0 mm 3-BL M4 hydro-propeller (left hydropropeller) |
| 1 x | 290 mm M4/M4 6.0x4.0 mm shaft ship |
| 1 x | Manometer 4 mm |
| 1 x | Trailing leg 131 mm |
 |
| 3,962.48EUR |
many units
temporarily out of stock
few units
