| 1 x | Hot Glue Stick GREEN |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 2 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
| 1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 1 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
| 1 x | Electric starter suitable for the DLE111, DLE120 and DLE85. |
| 2 x | Aluminium servo arm (2 uds) |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | Hot Glue Stick BLACK |
| 1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 1 x | Dust collector for mould cleaning |
| 1 x | Xplorer1 anemometro |
| 1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
| 2 x | Baseplate servo |
| 1 x | Oil FUCHS 1 liter |
| 1 x | Xplorer3 anemometro |
| 2 x | Ball link Aluminio M3 (2 pcs) |
| 1 x | Starter 12v (Max 180 and 30ccm) |
| 1 x | Bateria LRP 2200-7.2v 6 cell NiMH |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Z Bender - S Type Tool |
| 1 x | Hot Glue Stick RED |
| 1 x | Xplorer4 anemometro |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 1 x | Digital precision scale up to 2000 g |
| 2 x | Aro pasacable Ø25 mm (4 pcs) |
| 1 x | Turbina KINGTECH K320 G5 |
| 2 x | Starter EM Gear Power 80 |
| 1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
| 1 x | Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re |
| 1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
| 1 x | Crimping tool |
| 2 x | Servo NARO Max Std |
| 1 x | Hovercraft sailcloth |
| 2 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
| 2 x | Carbon fiber rod 4.0 mmx1000 mm |
| 1 x | Spinner 90 mm CFK |
| 1 x | Fibra de vidrio 80 g/m² (2 m x 100 cm) |
| 1 x | Mobile Terminal |
| 1 x | Waterproof adhesive tape, width 19mm, length 25m |
| 1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
| 1 x | ABS tube 6.0x4.0x1000 mm |
| 1 x | Connector CAN 15 |
| 1 x | Profile ABS half cane 3x1000 mm |
| 1 x | Green smoke canister 65 g |
| 1 x | Monokote BLUE metalizado (1.8x0.65m) |
| 1 x | Adaptadores carga 6s JST-XH |
| 1 x | Aro pasacable Ø20 mm (4 pcs) |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 4 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Small aluminium horn gold (2pcs) |
| 2 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | Carbon fiber rod 16 mm x 1000 mm |
| 1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
| 2 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 1 x | AX-60 starters (5 pcs) |
| 1 x | ABS tube 2.0x1.0x1000 mm |
| 1 x | PCARD Wireless System |
| 1 x | 6,4x1000 mm 2:1 green termoretract tube |
| 1 x | U Profile ABS 5,0x10,0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
| 2 x | ABS I Strip 10x5x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
| 1 x | Red smoke canister 100 g |
| 1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | Strip ABS 2.0x3.0x1000 mm |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | BALSA triangular 10x10x1000 mm |
| 1 x | Green smoke canister 100 g |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | Starter EM Gear Power 250 |
| 1 x | Strip 2,5x1,25x330 mm |
| 1 x | White smoke bombs AX-3 (10 pcs) |
| 1 x | Profile ABS Square 2 x 1000 mm |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 1 x | SE Ring 450 mm (2 pcs) |
| 1 x | Yellow smoke canister 140 g |
| 1 x | Electric rocket starters (6 pcs) |
| 1 x | Strip 3,5x1,75x330 mm |
| 1 x | Horn 20x28,5 mm (2 pcs) |
| 1 x | Carbon fiber rod 2.0 mmx1000 mm |
| 1 x | ABS tube 3.0x1.0x1000 mm |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | Tape GFK 50 mm |
| 1 x | Ring 320 mm length (5 pcs) |
| 1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
| 1 x | BEC 3A FOXY |
| 1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs) |
| 1 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | Cable with accesories |
| 1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | U Profile ABS 1,0x2,0x1000 mm |
| 1 x | Monokote ROJO misil (1.8x0.65m) |
| 1 x | LASER 260 60" V2 ARF Yellow (SkyWing) |
| 1 x | 90x75 mm standart servo cover |
| 1 x | Servo TOPMODEL S7520 MG |
| 1 x | 11 mm wing servo holder |
| 1 x | 18 mm wing servo holder |
| 1 x | Servo TOPMODEL DS1413 T |
| 1 x | 58 mm micro servo cover |
| 1 x | 50x45 mm micro-mini servo cover |
| 1 x | L-shaped servo mount |
| 1 x | Z-shaped servo mount |
| 1 x | Servo arm with 6 mm hole to FEMA 9800A |
| 1 x | Lipo KAVAN 5000 mAh 11.1v 40/80C |
| 1 x | Ball Bearing Oil 25 ml |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | Bags de Luxe ASPIRE |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
| 1 x | Bags MB-339 (Wings & Elevators) |
| 1 x | Motor A50-14 L 8-Polos Electric turbine |
| 2 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Balsa panel 8.0x100x1000 mm |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | AC-10 pre-rotacion with motor |
| 1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
| 1 x | Festo Adaptor Tygon Large/4mm |
| 1 x | 90x45 mm hard foam KOVO wheel |
| 1 x | Carbon fiber rod 10 mm x 1000 mm |
| 2 x | Air pressure gauge |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | 800TVL CMOS camera for FPV |
| 1 x | Carbon fiber rod 6.0 mmx1000 mm |
| 1 x | MR30 connector male |
| 1 x | Black "FUEL VENT" round aluminum overflow socket |
| 1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 1 x | 90 mm CFK long Spinner fixed by a central screw |
| 1 x | 82 mm 12 mm axi 30 g F3A CF drilled spinner |
| 1 x | Tip wing protector 30x10 (2 pcs) |
| 1 x | 76x24 mm (3.0") Type jets aluminium core wheel |
| 1 x | Carbon fiber flat 1000x3.0x0.13 mm |
| 1 x | Motor Mega AC 16/25/02 |
| 1 x | Size "M" motor holder for class 400 |
| 1 x | Motor Mount for Multiplex FunJet |
| 1 x | Cooler motor type 300 |
| 1 x | ABS Strip 1.5x3.0x1000 mm |
| 1 x | Round Rod 1,25x1000 mm |
| 1 x | ABS rectangular profile 12x6.0x1000 mm |
| 1 x | BALSA triangular 15x15x1000 mm |
| 2 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | Motor A60-5XS V4 28-pole kv420 |
| 1 x | Motor A20-20 L EVO |
| 1 x | A30-M/L/XL Backmountset complete |
| 1 x | Connectors banna oro 6,0 mm (M/F) |
| 1 x | Tape GFK 25 mm |
| 1 x | Aluminum Fold Prop Spinner 40 mm / 5mm |
| 1 x | Cable video GoPro and 5V cable |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Captador RCEXL para DA |
| 1 x | Nylon gear block Ø 5 mm (2 uds) |
| 1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
| 1 x | Quick hose connector 4-4 mm |
| 1 x | Connectors banna oro 3,5 mm (M/F) |
| 1 x | Tip wing protector 28x10x12 (2 pcs) |
| 1 x | 80x40 mm hard foam KOVO wheel |
| 1 x | Tail wheel for 5-8 kg models |
| 1 x | Hose stopper 4 mm |
| 1 x | 40 mm air cylinder |
| 1 x | Angled clevis with threaded rod M3 |
| 1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
| 1 x | Nylon gear block Ø 4 mm (2 uds) |
| 1 x | Big-Malibu XL Roof box with surfboard rack GREY |
| 1 x | 38x4,5 mm wires output (2 pcs) |
| 1 x | Tail wheel for 8-12 kg models |
| 1 x | Nylon threaded block M6 (2 uds) |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | Tailwheel for 1-3 kg models |
| 1 x | Fail Safe air retract |
| 1 x | A/C quality beech plywood 600x300x1.5 mm |
| 1 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
| 1 x | Quick hose connector 3-3 mm |
| 1 x | Nylon threaded block M4 (2 uds) |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | Faucet FESTO |
| 2 x | Aero shocks |
| 1 x | Carbon blade 3D 230 mm |
| 1 x | Aluminum Fold Prop Spinner 30 mm / 5.0 mm |
| 1 x | Tailwheel for 40/90 size |
| 1 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 1 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | 89 mm INO spinner (carbon imitation) |
| 1 x | Horn 13,5x16 mm (2 pcs) |
| 1 x | Landing gear clamp for Ø 3 mm (4 uds) |
| 1 x | 41x5,5 mm wires output (2 pcs) |
| 1 x | Birch plywood plate 600x300x3.0 mm |
| 1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
| 1 x | Aluminum Fold Prop Spinner 30 mm / 3.17 mm |
| 1 x | Carbon fiber rod 8.0 mmx1000 mm |
| 1 x | Bungee HLG Premium |
| 1 x | Carbon plate 350x150x1.0 mm |
| 1 x | Nylon threaded block M5 (2 uds) |
| 1 x | Blind nut M8 (10 pcs) |
| 1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
| 1 x | Landing gear axle Ø 4 mm (2 uds) |
| 1 x | |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | Festo 6mm Tubing Holder (10 uds) |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | Carbon fiber rod 12 mm x 1000 mm |
| 1 x | Landing gear strap small (4 uds) |
| 1 x | Tailwheel for 20/60 size |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Carbon fiber rod 2.5 mmx1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Landing gear clamp for Ø 2 mm (4 uds) |
| 1 x | Blind nut M6 (4 pcs) |
| 1 x | Dual Sequencer Gear and Canopy |
| 1 x | 82 mm INO spinner (carbon imitation) |
| 1 x | Blue "FUEL VENT" round aluminum overflow socket |
| 1 x | Festo 4mm Tubing Holder (10 uds) |
| 1 x | Nylon gear block Ø 6 mm (2 uds) |
| 1 x | A/C quality beech plywood 1520x750x3.0 mm |
| 1 x | MR30 connector female |
| 1 x | Nylon gear block Ø 3 mm (2 uds) |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | Carbon fiber rod 7.0 mmx1000 mm |
 |
| 14,674.33EUR |
