| 1 x | Propeller balancer |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | Field folding model stand SebArt |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | WingFix ULTRA Black Edition |
| 1 x | Walnut wood slat 3.0x3.0x1000 mm |
| 2 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 2 x | Beech dowels 4.0 x 1000 mm |
| 1 x | Propeller balancer |
| 2 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | Angle of incidence meter |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 3 x | Pine wood slat 5.0x5.0x1000 mm |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Medidor ángulos y/o incidencias |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 1 x | Squared carbon wing joinner 5x5x220 mm |
| 1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
| 1 x | Carbon fiber rod 20 mmx1000 mm |
| 1 x | Carbon fiber rod 12 mm x 1000 mm |
| 3 x | Carbon fiber rod 1.0 mm x 1000 mm |
| 1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
| 1 x | Carbon fiber rod 8.0 mmx1000 mm |
| 2 x | Carbon fiber rod 16 mm x 1000 mm |
| 1 x | Carbon fiber rod 5.0 mmx1000 mm |
| 2 x | Carbon fiber rod 2.5 mmx1000 mm |
| 1 x | Carbon fiber rod 3.0 mm x 1000 mm |
| 1 x | Horn with ball 55x40 |
| 1 x | 6 mm red aluminium threaded horn with patella |
| 2 x | Brass control horn M2 short for wire (2 pcs) |
| 1 x | Horn 5/20 with M2 Bearing |
| 1 x | Cable control set |
| 2 x | Horn 6/35 with M3 Bearing |
| 1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
| 1 x | LH long aluminium horn L31xH30 (2pcs) |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
| 1 x | Horn 6/20 with M3 Bearing |
| 1 x | Horn 6/27 with M3 Bearing |
| 2 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
| 1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
| 1 x | Horn 20x28,5 mm (2 pcs) |
| 2 x | RH long aluminium horn (2pcs) |
| 1 x | LH long black aluminium horn L31xH30 (2pcs) |
| 1 x | Brass control horn M4 short for wire (4 pcs) |
| 1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
| 1 x | Horn 5/10 with M2 Bearing |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 1 x | Interface Jack Adapter IKARUS |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 2 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 2 x | RF9 Flight Simulator with Spektrum Controller |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | Glases Ace |
| 1 x | Tube Pitot to PIXHAWK |
| 1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
| 1 x | 1/12 Pilot "Tom" |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | Angle measurer |
| 1 x | Actuador lineal HLS12-100210-7.4v |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | SATORI 2 PRO V C64 F5J |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Pine wood slat 10x10x1000 mm |
| 2 x | BALSA triangular 6x6x1000 mm |
| 1 x | Set stickers JEEMO "Andy" |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | Small aluminium horn red (2pcs) |
| 1 x | Carbon fiber flat 1000x3.0x0.13 mm |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
| 1 x | Small adjustable aluminium control horn with bearing 2,8x15 |
| 1 x | Rudder forward 80x28 "type Kato" |
| 1 x | Small control horn with bearing (2 pcs) |
| 1 x | Long horn 50x26 |
| 1 x | Control horn long w/ball |
| 1 x | Carbon fiber rod 6.0 mmx1000 mm |
| 1 x | Carbon fiber rod 1.5 mm x 1000 mm |
| 1 x | Small aluminium horn blue (2pcs) |
| 1 x | Horn 16,5x20 mm (2 pcs) |
| 2 x | Carbon fiber rod 2.0 mmx1000 mm |
| 1 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Horn DUBRO 1/2A |
| 2 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
| 1 x | Surface Indicator Gauge Small |
| 1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
| 2 x | EasyFLY Addon |
| 1 x | SIMtransmitter 6 Mode 2 |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Slave-cable USB Easy Sim |
| 1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 1 x | Servo HBS 690BB HV Digital |
| 2 x | SERVO DES 707 BB MG |
| 1 x | P 17×5.8 Prop-2PCS/PAIR |
| 1 x | Helices DJI Mavic Air 2 STEALTH "Black" (4x Ud) |
| 1 x | Landing gear Rocket 400 |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | Mini VISION "spread tow" CFK |
| 1 x | VAGABOND 1500 mm ARF V2 (Blue) |
| 1 x | Carbon fiber rod 4.0 mmx1000 mm |
| 1 x | HAWK 100 ARF scale 1:4.75 2480 mm - PAINTED AH106 |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 2 x | Balsa panel 10x100x1000 mm |
| 1 x | A/C quality beech plywood 1520x750x3.0 mm |
| 1 x | A/C quality beech plywood 600x300x1.5 mm |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | Birch plywood plate 600x300x1.2 mm |
| 1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
| 2 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | A/C quality beech plywood 600x300x8.0 mm |
| 1 x | Balsa panel 2.0x100x1000 mm |
| 1 x | A/C economy plywood 600x300x6+.0 mm |
| 1 x | Lite Plywood panel 600x300x2.0 mm |
| 1 x | Balsa panel 1.5x100x1000 mm |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
| 1 x | Birch plywood plate 600x300x1.5 mm |
| 1 x | Balsa panel 5.0x100x1000 mm |
| 1 x | Swift ARF 2000 mm Red (Hacker Model) |
| 1 x | THERMIK XL 4000 mm |
| 1 x | Glider Ka 7 Red (2540mm) |
| 1 x | Lunak ARF 2000 mm Yellow (Hacker Model) |
| 1 x | FOX ARF 2000 mm Red (Hacker Model) |
| 1 x | VAGABOND 1500 mm ARF V2 (Red) |
| 1 x | Panel Honeycom carbon 350x150x3.5mm |
| 1 x | Fibra vidrio 25g 110 cm/ 100m (Interglass 02034, finish FE800 p |
| 1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
| 1 x | Fiberglass plate 350x150x1.5 mm |
| 1 x | Glass fabric 390 g/m² (silane, twill) 100 cm x 20m |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain) |
| 1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
| 1 x | Soporte metal para servos |
| 1 x | SERVO DES 658 BB MG |
| 1 x | Propeller POWER-PROP 14x8 |
| 1 x | Horn 13,5x16 mm (2 pcs) |
| 1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
| 1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
| 1 x | Ventus 1:4 set of instruments |
| 1 x | ABS 500 x 400 x 0,5 mm (white) |
| 1 x | Glass fabric 25 g/m² (1 m²) |
| 1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
| 1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 5 m |
| 1 x | Fibra de vidrio 80 g/m² (10 m x 100 cm) |
| 1 x | Fibra de vidrio 80 g/m² (3 m x 100 cm) |
| 1 x | Film release agent PVA 25 ml |
| 1 x | Fiberglass plate 350x150x4.0 mm |
| 1 x | Fiberglass 25 g/m² 5000x1270 mm |
| 1 x | Fiberglass 163 g/m² 1m x 10 m (Aero, finish FK 144, plain) |
| 1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
| 1 x | SERVO DES 568 MG |
 |
| 12,357.16EUR |
