1 x | Oracover CHROME 2m |
1 x | One touch canopy lock |
1 x | Oratex Yellow Cub 10 m |
1 x | 1/6 Pilot "Tony" |
1 x | 2 mm Prop Adapter M6 |
1 x | Oracover Yellow CADMIO 2 m |
1 x | 2,3 mm Prop Adapter M6 |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | 5 mm Prop Adapter M8 |
1 x | Dumper propeller 6/8 mm |
1 x | 5 mm Prop Adapter M6 |
1 x | 1/6 Pilot "John" |
1 x | Pilot "Dick" Legends Series (Slimline) |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | 4 mm Prop Adapter M8 |
1 x | Prop Shaft Adapter 5 mm/M8 "long" |
1 x | ORACOVER Ferrari red (2 m) |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Ply-Span 450x600/13g Red |
1 x | Prop Shaft Adapter 5 mm "long" |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Pilot "Anthony" (Slimline) |
1 x | 4 mm Prop Adapter M8 |
2 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | PROFICOVER 5m |
1 x | Ply-Span 450x600/13g Yellow |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Oracover Azul Cielo 2 m |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | Oracover Brown 2 m |
1 x | 1/12 Pilot "Fighter" |
1 x | 10 mm Prop Adapter M12 |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Piloto Jet "Green" 1/6 Scale |
1 x | Prop Shaft Adapter 4 mm/M8 "long" 35 mm |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | 3,2 mm Prop Adapter M6 |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Ply-Span 450x600/13g Orange |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | 1/12 Pilot "Tom" |
1 x | ORACOVER Fluor red (2 m) |
2 x | Covered closure or fairings |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | 1/6 Pilot "Garry" |
1 x | 1/4 Pilot "Heidi" |
1 x | Oracover Yellow CUB 10 m |
1 x | La Capitania di Venetia accesories |
1 x | Aero-Master (Aero-naut) |
1 x | Oracover Verde 2 m |
1 x | Monokote PLATINO metalizado (1.8x0.65m) |
1 x | Tirpiz Battleship 1:200 |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | 3 mm Prop Adapter M6 |
1 x | Oracover Red 2 m |
1 x | 3,2 mm Prop Adapter M8 |
1 x | 5 mm Prop Adapter CN-Spinner |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Alfileres de cobre 0,7 x 7 mm, aprox.50 g |
1 x | Piloto jet 130 mm |
1 x | Oracover Black 2 m |
1 x | Ply-Span 450x600/13g Blue |
1 x | 1/10 Pilot "Jack" |
1 x | Prop Shaft Adapter 8 mm/M12 "long" |
1 x | Aero-Master Cabine (Aero-naut) |
1 x | Cockpit plastic closing |
1 x | 4 mm Prop Adapter M6 |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | 2,3 mm Prop Adapter M6 |
1 x | SUS wire 3m (nylon coated) |
1 x | 6 mm Prop Adapter M8 |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | Oracover White 2 m |
1 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | 5 mm Prop Adapter M8 |
1 x | 1/6 Pilot "Cindy" |
1 x | Oracover Orange 2 m |
1 x | Oratex Natural White 20m |
1 x | Aero-Master Wings (Aero-naut) |
1 x | Piloto Jet "Red" 1/6 Scale |
1 x | Ball link M2,5 (10 pcs) |
1 x | Joint with bearing M3 22x5,5 |
1 x | M3 Maxi ball link (2 uds) |
1 x | Ventus 1:4 set of instruments |
1 x | Socket head ball link M3 (2 uds) |
1 x | Ball link M3 (6 uds) |
1 x | Long ball link M2 (6 uds) |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
1 x | Short ball link M1.6 (6 uds) |
1 x | Short ball link M3 (6 uds) |
1 x | Ball link M2 (10 pcs) |
1 x | Ball link M3 RPA's-UAV's |
1 x | Long ball link M3 (6 uds) |
1 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | Prolongador S-Bus JR/JR 10cm |
1 x | Circlick securite |
1 x | Cabel "Y" 15 cm |
1 x | Extension 7.5 cm |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | Extension silicon 100 cm (Graupner) |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
1 x | Extension silicon 35 cm male (Futaba) |
1 x | Cable S.BUS 3 salidas 300 mm |
1 x | Premium servo extension 25cm |
1 x | Extension 30 cm (Futaba) |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
1 x | Extension silicon 10 cm (Graupner) |
1 x | Extension silicon 100 cm (Futaba) |
1 x | 200 mm extensión servo HITEC/JR |
1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | Premium servo extension 75cm |
1 x | Extension silicon 10 cm (Futaba) |
1 x | Quicklock washer 2 mm (10 pcs) |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | Small aluminium horn blue (2pcs) |
1 x | Rubber profile 6-2 mm 2M |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | Wood anchor 30 mm (2 uds) |
1 x | Hinge 4x14 mm (20 pcs) |
1 x | Spinner propeller pleg. 45 mm / 5,0 mm |
1 x | Spinner 3BL propeller pleg. 40 mm / 4,0 mm |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | Pushrod octagone 3/2 with coupler M2 |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | PVC yellow transparent battery termo-retract 68 mm (1 m) |
1 x | Red spinner 45 mm |
1 x | Spare spinner 36 mm 3-Bl |
1 x | Pushrod octagone 3/2 |
1 x | Red spinner 40-45 mm |
1 x | Landing gear frontal support 29x26x13,5 |
1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Spinner 3BL propeller pleg. 42 mm / 5,0 mm |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | 50 mm white plastic spinner for fixed propeller |
1 x | PVC red battery termo-retract 68 mm (10 m) |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Wheel collar 4 mm Ø (4 uds) |
1 x | Schul-Malpinsel Gr.5 |
1 x | Ancla Hist. 67 mm (2 uds) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | ALMIRALSANKER anchor 40 mm (2 uds) |
1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
1 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
1 x | 3 mm Leader (L 100 mm) |
1 x | 12x6 tree blades propeller |
1 x | 11x7 tree blades propeller |
|
3,457.97EUR |