2 x | ABS tube 16.0x14.0x1000 mm |
2 x | ABS tube 7.0x5.0x1000 mm |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | ABS tube 5.0x3.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | ABS tube 4.0x2.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | ABS tube 8.0x6.0x1000 mm |
2 x | ABS tube 20.0x18.0x1000 mm |
2 x | ABS tube 3.0x2.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
2 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Connectors DEANS 4 pins (1 pair) |
1 x | Tape GFK 50 mm |
1 x | 2 mm male connector (2 pcs) with safety connector |
1 x | Foil for sticking flaps and ailerons |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
1 x | Ring 320 mm length (5 pcs) |
1 x | XH male balance (4S) connector (2 pcs) |
2 x | XH female balance (4S) connector (2 pcs) |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
1 x | Connector CAN 15 |
1 x | Connectors banna gold 5,5 mm (M/F) |
1 x | XH female balance (3S) connector (2 pcs) |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | SE Ring 350 mm (2 pcs) |
1 x | Connectors banna oro 6,0 mm (M/F) |
1 x | XH male balance (3S) connector (2 pcs) |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | SE Ring 400 mm (2 pcs) |
1 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Connectors banna oro 8,0 mm (M/F) |
1 x | Conector BEC female (10 pcs) |
1 x | SE Ring 300 mm (2 pcs) |
1 x | SE Ring 240 mm (2 pcs) |
1 x | SE Ring 330 mm (4 pcs) |
3 x | 20x200 mm battery rings |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | MPX Sub-D Adaptor |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | Optotronix Aurora Plug |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Stickers-digit for marking |
1 x | XH female balance (5S) connector (2 pcs) |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | AX-60 starters (5 pcs) |
1 x | Pilot "Goose" (Slimline) |
1 x | Spray YELLOW Inca Lexan 150ml |
1 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | Horn 6/27 with M3 Bearing |
2 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Futaba BLS152 - Upper Case |
1 x | Futaba Multi-Switch-Prop 12+2 DECODER |
1 x | GPS, Vario and altitude Sensor SBS-01G |
2 x | Cable S.BUS 3 salidas 100 mm |
1 x | ABS tube 10.0x8.0x1000 mm |
2 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
1 x | FUTABA T10 J T-FHSS |
1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
1 x | Quadcopter Q50 Kit Carbon Fiber |
1 x | Blue aluminium servo arm V1-Hitec 20 mm M2 |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Electric starter suitable for the DLE111, DLE120 and DLE85. |
1 x | F450/550 Quadcopter, landing gear |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Marker ties (20 pcs) |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | Rudder 2_Tray 3~3.5 inch |
1 x | Z Bender - S Type Tool |
1 x | Bateria LRP 2200-7.2v 6 cell NiMH |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
1 x | Blue aluminium servo arm V1-Hitec 1,0" inch M2 |
1 x | Panasonic Eneloop AA 1,2 V battery 19>00 mAh |
1 x | Motor DLE 200cc Premium Muffler |
1 x | Motor DLE 200cc Std |
2 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm) |
1 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
1 x | PH6 adapter for 6mm M10 AXI for AXI41xx |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | ABS tube 3.0x1.0x1000 mm |
2 x | 120x60 mm SLH KOVO wheel |
1 x | 100 Newtons FEMA absorber |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm) |
1 x | Battery FUTABA 18MZ |
1 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Battery RX JETI LiIon RB 3100 7.2v |
1 x | Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M |
1 x | Switch moment button, 2 functions, long FUTABA |
1 x | |
1 x | Futaba T3PV T-FHSS |
1 x | Maleta transporte FUTABA 10PX |
1 x | Futaba FX36 2.4GHz FASST Test + R7008SB |
1 x | Battery FUTABA Li-Fe 2100 mAh 6.6v 4PLS/4PX/8J/10J/14SG/18SZ |
1 x | Ø 50-60 mm canister holder |
1 x | 101x28 mm (4.0") Type jets aluminium core wheel |
1 x | Receiver bed (Blue) |
1 x | Ø 65-75 mm canister holder |
1 x | Turbine CHEETAH 160 SE |
1 x | White smoke canister 65 g |
1 x | Fiberglass plate 620x540x2,0 mm |
1 x | Teflon rollers 40 mm x 15 mm Diam. |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Axle for motor A30-XL V2 |
1 x | FesEx-Uni6 System |
1 x | Support XT60 conector (2 pcs) |
1 x | Tube support Ø 6mm (10 pcs) |
1 x | Support Filtro FESTO |
1 x | Angle support XT60 conector |
1 x | Pasacables rectangular 40x15 mm (4 pcs) |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Soporte filtro FESTO (4 pcs) |
1 x | Support pumb/filter Xicoy X45 |
1 x | Soporte grifo FESTO (2 pcs) |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Support conector MPX (6 pcs) |
1 x | Support Flush MPX Conector (6 pcs) |
1 x | Support ECU Xicoy X-45 |
1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
1 x | 1/7 Pilot "Japanese" |
1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
1 x | 1/4 Pilot "Heidi" |
1 x | 1/6 Pilot "Garry" |
1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | FuelTank Cap (red) |
1 x | FOD guard for VT80BL, M90, M100K, M100XBL, M140K, M140XBL and M |
1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
1 x | Gold aluminium double servo arm JR/Graupner 40 mm M3 F3A |
1 x | 22m Fitting barb |
1 x | 1/6 Pilot "Buddy" |
1 x | Turbo Prop KS |
1 x | Turbine LYNX 130 |
1 x | Turbine MAMMOTH 25.4 Kg |
1 x | Blue smoke canister 100 g |
1 x | Support FUEL DOT V3 |
1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
1 x | Teflon rollers 80 mm x 15 mm Diam. |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
1 x | Film release agent PVA 25 ml |
1 x | Fiberglass plate 620x540x0,3 mm |
1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
1 x | Release film 100 cm x 50 m |
1 x | Fiberglass plate 620x540x0,2 mm |
1 x | Fiberglass plate 620x540x3,2 mm |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | PBS TJ 40-G2 Turbine |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | TARANIS Q X7 |
1 x | ECU BL180 Jets Munt |
1 x | Axle for AXI 5330/xx motors |
1 x | Miniature brass strap hinge, 1 m |
1 x | Piston ring for DA-150 |
1 x | Reed valve for DA 50-R |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Xoar Electric Beechwood Prop 24x8 |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Carburetor for ZG45SL and ZG62/S/SL |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | A50 Motor Mount Alu complete set |
1 x | A60-6XS V4 28-Pole |
1 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | Shaft for A60-L (140mm) |
1 x | Connectors banna oro 4 mm (M/F) |
|
48,209.69EUR |