| 2 x | Universal Colour Paste deep black 250 g |
| 2 x | Spray adhesive INFUTAC (Clear) 500 ml |
| 1 x | Hobbylite Filler, Balsa colour |
| 1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
| 1 x | Painting GHT Lexan Black 150 ml |
| 1 x | Spray EC Red 400ml |
| 1 x | Solvent Plasti Dip 1000 ml |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | Nitroverdu 500 ml |
| 1 x | Spannlack 1000 ml |
| 1 x | 20 g tin paste |
| 2 x | Spray adhesive AEROFIX 2 |
| 1 x | Plasti Dip Liquid Tape 429 ml orange |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | 500 ml sealer (DOPE) |
| 1 x | Spray Graphit 33 |
| 1 x | Aluminium cap bolt washer M4 red (8 pcs) |
| 1 x | Aluminium M2x12 mm screw (4 pcs) |
| 1 x | Fresa corte diamante Ø 2.3mm (bola) |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
| 1 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
| 2 x | Dean "T" - Futaba Adapter |
| 1 x | Dremel PERMAGRIT thin lime |
| 1 x | Aluminium wide washer M3 gold (4 pcs) |
| 1 x | Cut tube |
| 1 x | CC 03 |
| 1 x | Circlick securite |
| 1 x | Aluminium wide washer M4 Gold (4 pcs) |
| 1 x | Cabling for Fox MDM1 wings |
| 1 x | Copier 5x20 cm pcs |
| 2 x | Digital scale up to 40 kg |
| 1 x | Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs) |
| 1 x | Anodized alum. M3x0,5x20 mm Flat Head screw (4 blue pcs) |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | Aluminium wide washer M4 Blue (4 pcs) |
| 1 x | Blind nut M2 (10 pcs) |
| 1 x | Anodized aluminium servo M4x5/8 screw (4 lilac pcs) |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Crimping tool |
| 1 x | 55% silver electrodes (2 pcs) |
| 1 x | 30 cm BEC cable (female) |
| 1 x | CC 05 |
| 1 x | Ball Link Plier |
| 1 x | Disposable Injector Bags (30x16cm) 100 pcs |
| 1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
| 1 x | Fresa corte diamante Ø 1.0mm (bola) |
| 2 x | Digital weight, angle and balance meter BASIC |
| 1 x | Connector Sub-D 2+5 Female |
| 1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
| 1 x | 12 mm floating pad (49 pcs) |
| 1 x | 15 mm floating pad (30 pcs) |
| 1 x | Fresa corte diamante Ø 1.4mm (bola) |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | DPSI Ampere battery backer |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | |
| 1 x | Dust collector for mould cleaning |
| 1 x | Aluminium wide washer M3 red (4 pcs) |
| 1 x | 25 mm Sandpaper file |
| 1 x | Connector CAN 15 |
| 1 x | Copier 2x20 cm pcs |
| 1 x | Blind nut M5 (4 pcs) |
| 1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
| 1 x | Double conector with JR adapter and 200 mm extension |
| 1 x | Fabric scissors curved Premium, 16 cm / 6" length |
| 1 x | Ball Link Plier |
| 1 x | 2,5x60 mm allen screwdriver |
| 1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | EC-Cutter |
| 1 x | 1,5x50 mm allen screwdriver |
| 1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
| 1 x | 4 LiPo XH>EH adapter |
| 1 x | Connector Sub-D 2+5 Male |
| 1 x | Aluminium cap bolt washer M3 green (8 pcs) |
| 1 x | Blind nut M3 (4 pcs) |
| 1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
| 1 x | 100g Flux Paste for Silver Solder |
| 1 x | CC 02 |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | Aluminium wide washer M3 blue (4 pcs) |
| 3 x | Gates hinge aluminium (1 pcs) |
| 2 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 2 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 3 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 1 x | Pin hinge 39x20 mm (10 uds) |
| 1 x | Jeti Black cap |
| 1 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 1 x | Miniature brass strap hinge, 1 m |
| 2 x | Gates hinge 30x16 mm (2 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 1 x | Long pinned hinge (6 uds) |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 3 x | Long pinned hinge (12 uds) |
| 1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 2 x | Bungee HLG Premium |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 2 x | ABS 500 x 400 x 2,0 mm (white) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 2 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
| 1 x | ABS 500 x 400 x 1 mm (white) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | ABS 500 x 400 x 0,5 mm (white) |
| 1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
| 1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
| 2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | Buy Perforated film 100 cm / 50 m |
| 2 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | Carbon fibre sandwich sheet 350x150x3 mm |
| 1 x | Buy Perforated film 100 cm / 10 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
| 1 x | Buy Perforated film 145 cm / 50 m |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | Strip ABS 2.0x5.0x1000 mm |
| 1 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
| 1 x | 1/6 Pilot "John" |
| 1 x | Towing hook <3m |
| 1 x | SERVO HOLDER |
| 1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
| 1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
| 1 x | AXI 2204 Multicopter |
| 1 x | Fresa corte diamante Ø 2.35mm (flame) |
| 1 x | MPX 8 pins plug mold |
| 1 x | Sub-D Plug Mold |
| 1 x | Extension 5 lipos JST - JST/C |
| 1 x | Interruptor RX/Batterie |
| 1 x | PSC 6 |
| 1 x | Anodized aluminium servo M4x5/8 screw (4 red pcs) |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | Quicklock washer 2.5 mm (10 pcs) |
| 1 x | Lock washer 3.2 mm (20 pcs) |
| 1 x | Tapping Screw M2.9x13 (10 pcs) |
| 1 x | Servo M2x7/16 screw (4 pcs) |
| 1 x | Welder 100W/200V |
| 1 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
| 1 x | Laminating brush 10 mm, pack/ 50 pcs |
| 1 x | Quicklock washer 2 mm (10 pcs) |
| 1 x | Flap hinge 33x9 mm (6 pcs) |
| 1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 1 x | Small flex hinge (12 uds) |
| 1 x | Adapter 4,0 mm M6 |
| 1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
| 1 x | 2 mm Prop Adapter M5 |
| 1 x | Pin type hinge Al 6x98 mm (2 pcs) |
| 1 x | Gates hinge black 30x16 mm (2 pcs) |
| 1 x | Adapter 3,2 mm M6 for spinner 40 mm fixed propeller |
| 1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
| 2 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
| 1 x | Adapter 5,0 mm M8 |
| 1 x | Adapter 3,2 mm M8 |
| 1 x | 2,3 mm Prop Drive Günther M4 |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 2 x | ROBART POINT HINGE 4,7mm (5 pcs) |
| 1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Threaded coupler M2 (10 uds) |
| 2 x | Micro flex hinge (12 uds) |
| 1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
| 1 x | Digital precision scale up to 2000 g |
| 1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
| 1 x | Adapter 5,0 mm M6 for spinner 40 mm fixed propeller |
| 1 x | Pin hinge 26x11 mm (10 uds) |
| 1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Large flex hinge (12 uds) |
| 1 x | Lunak ARF 2000 mm Yellow (Hacker Model) |
| 1 x | Gates hinge |
| 1 x | BABY glider drawings (Aero-naut) |
| 1 x | 1000 ml sealer (DOPE) |
| 1 x | Glider PIROL |
| 1 x | Set stickers JEEMO "Andy" |
| 1 x | 3 mm Leader (L 100 mm) |
| 1 x | 28 mm turnbuckle |
| 1 x | X-RAY Micro QR |
| 1 x | X-RAY Micro QR (Fuselage with canopy) |
| 1 x | BABY glider (Aero-naut) |
| 1 x | 3,2 mm Prop Adapter M8 |
| 1 x | Glidder Mü13e (Bergfalke) |
| 1 x | Dremel 3000 130W |
| 1 x | 15x7 tree blades propeller |
| 1 x | Sliding window 1:2,4 / 1.2,6 Scale |
| 1 x | X-RAY Micro QR (Elevator) |
| 1 x | Dremel PERMAGRIT 18 mm round lime |
| 1 x | Canopy Sweet / Siesta |
| 1 x | Aluminium wide washer M4 Red (4 pcs) |
| 1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | Bec MR UBEC 5A (5v/6v/7v) |
| 1 x | 3 mm Prop Adapter M6 |
| 1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
| 1 x | 14 mm portholes (10 pcs) |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | VTX 477 Carbon Rotorblade |
| 2 x | Aluminium cap bolt washer M3 black (8 pcs) |
| 1 x | 3,2 mm Prop Adapter M6 |
| 1 x | DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply) |
| 2 x | DPSI Micro - RCS |
| 1 x | Vasa model Catapult |
| 2 x | DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 1 x | Propeller diller for DLE170 |
| 1 x | Sealing Iron STANDARD |
| 1 x | Propeller diller for DLE111 and DA85-150 |
| 2 x | DPS Switch JR/JR |
| 1 x | Emcotec SPS Magnetic Switch Actuator |
| 1 x | OPTOTRONIX Aurora LCU |
| 2 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | Glass fabric 280 g/m² (twill weave) 100 cm, roll 50 m |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 1 x | Carbon plate 700x550x0.5 mm |
| 1 x | Glass fibre sleeve Ø 20 mm X 20m |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
| 1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
| 1 x | Glass fabric 49 g/m² (1,27 x 20 m) |
| 1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
| 1 x | Carbon plate 550x350x1.0 mm ECOTECH |
| 1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 5 m |
| 1 x | ABS 500 x 400 x 1,5 mm (white) |
| 1 x | wing/fuselage connector for 16 pines AWG 20-24 |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | wing/fuselage connector for 3 pines AWG 20-24 |
| 1 x | DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch |
| 1 x | Battery EMCOTEC LiIon 3000 7.2v |
| 1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
| 1 x | Heat sink for Optotronix LEDs |
| 1 x | LiIon Battery 3000 mAh 3.3v 15A (2 pcs) |
| 1 x | DPSI RV Mini 5 (2008) |
| 1 x | EWC3 40 cm wing connector |
| 1 x | DPSI Micro SingleBat 5.9V/7.2V magnetic switch |
| 1 x | MPX Sub-D Adaptor |
| 1 x | Cover cap drop-shaped paintable 43 mm |
| 1 x | Optotronix Aurora Plug |
| 1 x | Heat-conducting adhesive (2x2ml), WLK DK 4 |
| 1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
| 1 x | EWC3 100 cm wing connector |
| 1 x | DPSI 2001 RV |
| 1 x | PowerFuel RX V2 Fuel Pump |
| 1 x | DPSI RV Mini 5 Magic |
| 1 x | DPSI RV Mini 6 (2008) |
| 1 x | wing/fuselage connector for 12 pines AWG 20-24 |
| 1 x | Filter Capacitor JR |
 |
| 13,123.38EUR |
