| 1 x | Conector MR-60 (pareja) |
| 1 x | Starter EM Gear Power 80 |
| 1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
| 1 x | Crimping tool |
| 1 x | Turbina KINGTECH K320 G5 |
| 1 x | Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re |
| 1 x | Extension MPX-MPX 20 cm |
| 1 x | "S" set for boats |
| 2 x | AX-60 starters (5 pcs) |
| 1 x | Smoke set "M" |
| 1 x | Smoke set "Glider" |
| 1 x | Electric rocket starters (6 pcs) |
| 2 x | Initior Receiver FRX2 Wireless |
| 1 x | Parachutist |
| 1 x | Ventral support for AX-18/AX-60 |
| 2 x | Parachute expulsion foam |
| 2 x | "S" set for planes |
| 1 x | White smoke bombs AX-60 (5 pcs) |
| 1 x | PCARD Wireless System |
| 1 x | Yellow smoke bombs AX-60 (5 pcs) |
| 1 x | White smoke bombs AX-9 (10 pcs) |
| 2 x | Smoke set "S" |
| 2 x | Yellow smoke canister 140 g |
| 1 x | Initior Transmitter FTX2 Wireless |
| 2 x | Aluminum Bayonet / strongal D25 mm / 1 m |
| 1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
| 1 x | White smoke bombs AX-18 (5 pcs) |
| 1 x | Red smoke bombs AX-60 (5 pcs) |
| 2 x | 3l Smoke oil |
| 1 x | Yellow smoke canister 100 g |
| 1 x | White smoke bombs AX-3 (10 pcs) |
| 1 x | Green smoke canister 100 g |
| 3 x | Opale Rucksack |
| 1 x | Paramotor BackPack XXS (without accessories) |
| 1 x | Wing OXY 5,0 m2 |
| 1 x | Parachute BACKUP X100 |
| 1 x | Rescue 1,8m2 / BackPack |
| 1 x | Wing OXY 0,5 pulgadas2 |
| 1 x | 6 mm aluminium horn with patella |
| 1 x | Horn 6/27 with M3 Bearing |
| 1 x | SlowFlyer control horn (3 pcs) |
| 1 x | Horn 6/20 with M3 Bearing |
| 1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
| 1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 1 x | Horn 13,5x16 mm (2 pcs) |
| 1 x | Brass control horn M4 short for wire (10pcs) |
| 1 x | Horn 16,5x20 mm (2 pcs) |
| 1 x | Horn 6/35 with M3 Bearing |
| 1 x | Horn with ball 40x30 |
| 1 x | Cable control set |
| 1 x | LH long black aluminium horn L31xH30 (2pcs) |
| 1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
| 2 x | Brass control horn M2 short for wire (2 pcs) |
| 1 x | Small aluminium horn red (2pcs) |
| 1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
| 1 x | Horn 5/20 with M2 Bearing |
| 1 x | Horn for flap control (1 pcs) |
| 1 x | Horn 20x28,5 mm (2 pcs) |
| 1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | 6 mm blue aluminium threaded horn with patella |
| 1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
| 1 x | Z Bender - S Type Tool |
| 1 x | Straightened rod Ø 2.0 mm x 1000 mm |
| 1 x | Aluminium blue ball links M3 V1 (10 pcs) |
| 2 x | Green smoke canister 140 g |
| 1 x | Battery RX JETI LiIon RB 6200 7.2v |
| 1 x | DUPLEX 2.4EX MU 3 Sensor |
| 1 x | DUPLEX 2.4EX Central Box 320 |
| 1 x | AddCAP 10AS capacitors |
| 1 x | DUPLEX 2.4EX Expander E2 |
| 1 x | LO 100 ARC 3.3m,cabina |
| 1 x | Glider Ka 7 Red (2540mm) |
| 1 x | ASK 21 6.5m + pylona |
| 2 x | LUNAK 4,00 m |
| 1 x | DG-303 ACRO 3750 mm (Airworld) |
| 1 x | LO 100 ARC 3.3m,frame canopy |
| 1 x | TAKEO 3.6m electric |
| 2 x | LIBELLE Standard 3.8m D-box H-201 |
| 1 x | ASH 31 6.08m Composite Hollow Molded |
| 1 x | Surprise XII Horizontal Estabilizer (Freudenthaler) |
| 2 x | Glider KNIRPS |
| 1 x | Fournier RF-4D |
| 1 x | Bungee HLG Premium |
| 1 x | Red smoke canister 100 g |
| 1 x | 120x60 mm SLH KOVO wheel |
| 1 x | Para-RC "RC-Evo-Cross" Rescue |
| 2 x | Parachute PV6 for F3J |
| 2 x | Para-RC Mix |
| 1 x | MAX pilot ARTF |
| 1 x | Green smoke canister 65 g |
| 1 x | Paramotor BackPack XXS 2 |
| 2 x | Jeti Black cap |
| 1 x | SE Ring 400 mm (2 pcs) |
| 1 x | Brass control horn M3 short for wire (2 pcs) |
| 1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
| 1 x | Small adjustable aluminium control horn with bearing 2,8x15 |
| 1 x | Long adjustable control horn with bearing |
| 1 x | Rudder forward 70x28 "type Kato" |
| 1 x | Medium extra-strong control horn with bearing 2,8x24 |
| 1 x | Cyanocrylate MD GA460 odourless 20g |
| 1 x | CA Glue (medium) 20g |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | Fox 4000 mm Airworld,canopy frame |
| 1 x | BLANIK 50 V2 Silver/Blue (SebArt) |
| 1 x | Fox 4000 mm (Airwold) |
| 1 x | BLANIK 50 V2 Silver/Orange (SebArt) |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
| 1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
| 1 x | |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | CA Glue fast 20g |
| 1 x | Mixing tube for double syringes and cartridges (MR 1:1 and 2:1) |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | Hardener Aero EPH 161 (250 g) |
| 2 x | Foaming agent for epoxy resins 200 g |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | Elevator VENTUS 2cx 4.5m |
| 1 x | VAGABOND 1500 mm ARF V2 (Red) |
| 2 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
| 1 x | LO 100 Scale 1:2 - Modellbau Bruckmann |
| 1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
| 1 x | Mixers smoke bombs AX-60 (5 pcs) |
| 1 x | GP 15 JETA |
| 1 x | SZD-56 Diana-2 Carbon D-box wing |
| 1 x | Wings Bags JEEMO |
| 1 x | Plastic caps for AIR BURTS (30 pcs) |
| 1 x | Servo KST MS825 V8.0 35kg 8.4v |
| 1 x | Lightweight aircraft wheel, 50x18.5x3 |
| 1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
| 1 x | Wheels 220mm (2 pcs) |
| 1 x | Yellow smoke canister 65 g |
| 1 x | X-RAY Micro QR (Elevator) |
| 1 x | Aero-Master (Aero-naut) |
| 1 x | Para-RC Trike "RC-Bullix" |
| 1 x | Tap FESTO 4-4 mm |
| 1 x | Wheel cover holder Ø 5 mm (2 uds) |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm) |
| 2 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm) |
| 1 x | Digital scale up to 40 kg |
| 1 x | Epoxy Resin L + Hardener L (40 min) 3.5 Kg (2.5 kg Resin L + 1 k |
| 2 x | 40 mm air cylinder |
| 1 x | Manometer 4 mm |
| 1 x | Actuator Electric 25 mm |
| 1 x | Landing gear axle Ø 4 mm (2 uds) |
| 1 x | Check valve quick hose connector 4-4 mm |
| 1 x | Wheel collar 2 mm Ø (4 uds) |
| 1 x | Landing gear strap small (4 uds) |
| 1 x | Cotton Flocks, bag/ 7 Kg |
| 1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
| 1 x | Fibra de vidrio 80 g/m² (10 m x 100 cm) |
| 1 x | Fiberglass 163 g/m² 1m x 5 m (Twill) |
| 1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
| 1 x | Fibra vidrio 25g 110 cm/ 100m (Interglass 02034, finish FE800 p |
| 1 x | Actuator Electric 25 mm HIGH TORQUE |
| 1 x | Fail Safe air retract |
| 1 x | Angled clevis with threaded rod M3 |
| 1 x | T-Hose connector 3-3-3 mm |
| 1 x | Faucet FESTO |
| 1 x | Servo arm with 5 mm hole to FEMA 9810A |
| 1 x | Servo arm with 4 mm hole to FEMA 9810A |
| 1 x | Y-Hose connector 4mm |
| 1 x | T-Hose connector 6-6-6 mm |
| 1 x | T-Hose connector 3-3-3 mm |
| 1 x | Landing gear strap large (4 uds) |
| 1 x | Quick hose connector 4-4 mm |
| 1 x | Landing gear axle Ø 5 mm (2 uds) |
| 1 x | Wheel cover holder Ø 3 mm (2 uds) |
| 1 x | T-Hose connector 4-4-4mm |
 |
| 42,143.11EUR |
