1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
1 x | Long pinned hinge (6 uds) |
1 x | Long pinned hinge (12 uds) |
1 x | Canopy Latch |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Gates hinge |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Foam plastic plates (310x210x2 mm) |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
2 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | ABS tube 8.0x7.0x1000 mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
1 x | Charger LiPo Charger4 |
1 x | Micro flex hinge (12 uds) |
2 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
2 x | Foam plastic plates (310x210x8 mm) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
2 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | 25 mm reinforced hinge |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | 40,0 mm hydro-propeller (left hydropropeller) |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | Large flex hinge (12 uds) |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Hovercraft sailcloth |
1 x | |
1 x | MRPM-AC revolution sensor |
1 x | Duplex 2.4 EX TopFuel MTAG Battery Reader |
1 x | Decorative caps, multicoloured, short |
1 x | DUPLEX 2.4EX Expander E2 |
1 x | Charger HITEC CG-42 TX 7.2v/ RX 4.8v (80 mA) |
1 x | Battery voltage telemetry |
1 x | Tray FUTABA T6K,T10J,T12K,T14SG,T16iZ,T18SZ,T18MZ,T32MZ |
1 x | Receiver bed (Blue) |
1 x | Transmitter Balancer Futaba T-10CG |
1 x | DUPLEX 2.4EX RC Switch |
1 x | Teacher-student connector T12FG/FX-30 |
1 x | DUPLEX 2.4EX MUI 150 Sensor |
1 x | Battery FUTABA 18MZ |
1 x | TX-Tray V1 (L) (Red) |
1 x | DUPLEX 2,4GHz MRPM EX |
1 x | SWTU2 switch |
1 x | Contest-S-Pult-Carbon mc-20/mc-24 |
1 x | Transmitter Balancer SPK DX-8 |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Cooler motor type 400 |
1 x | Motor Mount for Multiplex FunJet |
1 x | Carbon plate 350x150x1.0 mm |
1 x | Fibra vidrio 25g 110 cm/ 20m (Interglass 02034, finish FE800 pl |
1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 20m |
1 x | ABS tube 3.0x2.0x330 mm |
2 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | Transmitter Crystal 35 Mc/s Ch 77 |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm) |
1 x | Glass fabric 280 g/m² (twill weave) 100 cm, roll 50 m |
1 x | Fiberglass plate 350x150x0.3 mm |
1 x | Fiberglass plate 350x150x1.0 mm |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
2 x | ABS tube 6.0x5.0x1000 mm |
1 x | Fiberglass plate 620x540x2,0 mm |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
1 x | Fiberglass plate 350x150x0.5 mm |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | Stickers-digit for marking |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
1 x | ABS tube 8.0x6.0x1000 mm |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | Fiberglass plate 350x150x3.0 mm |
1 x | Quick hose connector 6-4 mm |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Release film 100 cm x 50 m |
1 x | Foam plastic plates (310x210x5 mm) |
1 x | Program 5v SIO RS 232 |
1 x | PropCover 16-20" (1 pcs) |
1 x | A50 Motor Mount Alu complete set |
1 x | Electric coversion set |
1 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
1 x | PH6 adapter for 6mm M10 AXI for AXI41xx |
|
3,840.18EUR |