2 x | Buy Perforated film 100 cm / 20 m |
2 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
2 x | Buy Perforated film 100 cm / 10 m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Buy Perforated film 100 cm / 50 m |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
3 x | Balsa panel 5.0x100x1000 mm |
2 x | A/C quality beech plywood 600x300x0.8 mm |
2 x | Balsa panel 1.5x100x1000 mm |
3 x | A/C quality beech plywood 600x300x5.0 mm |
2 x | Beech dowels 2.0 x 1000 mm |
1 x | BALSA trip 10x10x1000 mm |
3 x | A/C economy plywood 600x300x6+.0 mm |
3 x | BALSA triangular 6x6x1000 mm |
2 x | Balsa panel 3.0x100x1000 mm |
3 x | Balsa panel 4.0x100x1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
3 x | A/C quality beech plywood 1520x750x3.0 mm |
3 x | Balsa panel 6.0x100x1000 mm |
2 x | Balsa panel 1.0x100x1000 mm |
3 x | Balsa panel 2.5x100x1000 mm |
3 x | Balsa panel 2.0x100x1000 mm |
3 x | BALSA triangular 8x8x1000 mm |
3 x | A/C quality beech plywood 600x300x0.6 mm |
3 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
2 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
3 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
2 x | Ring 320 mm length (5 pcs) |
2 x | SE Ring 250 mm (2 pcs) |
3 x | 20x1000 mm Ring Strap Back To Back |
3 x | SE Ring 450 mm (2 pcs) |
2 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
5 x | 20x200 mm battery rings |
2 x | Tape GFK 50 mm |
3 x | SE Ring HACKER 300 mm (2 pcs) |
2 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | |
2 x | SE Ring 300 mm (2 pcs) |
2 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
2 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
4 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
2 x | Tape GFK 25 mm |
4 x | Foil for sticking flaps and ailerons |
4 x | SE Ring 360 mm (2 pcs) |
2 x | Red smoke canister 100 g |
2 x | Red smoke bombs AX-60 (5 pcs) |
1 x | 3l Smoke oil |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Glass fibre braided sleeve (45mm) roll 10m |
1 x | White smoke canister 140 g |
1 x | "S" set for boats |
1 x | Blue smoke canister 100 g |
1 x | PET film Mylar® A 350, 50 cm, roll/ 5 m |
1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
2 x | Sheet Depron Aero 1250x800x3 mm |
1 x | Smoke set "S" |
1 x | AX-60 starters (5 pcs) |
1 x | 12.7 mm 2:1 black termoretract tube |
1 x | Monokote BLUE metalizado (1.8x0.65m) |
1 x | 4,8x1000 mm 2:1 red termoretract tube |
1 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Monokote BLANCO jet (1.8x0.65m) |
2 x | 1,2x1000 mm 2:1 black termoretract tube |
1 x | Oracover Azul Cielo 2 m |
1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | 19 mm 2:1 black termoretract tube |
1 x | Oracover CARBON Metalic 1 m |
1 x | MYLAR film A350 (1000x500 mm) |
1 x | 6,4x1000 mm 2:1 blue termoretract tube |
1 x | Oracover Black 10 m |
1 x | 2,4x1000 mm 2:1 red termoretract tube |
1 x | 6,4x1000 mm 2:1 black termoretract tube |
1 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | 1,2x1000 mm 2:1 red termoretract tube |
2 x | Oracover Brown 2 m |
1 x | 2,4x1000 mm 2:1 green termoretract tube |
1 x | 1,6x1000 mm 2:1 red termoretract tube |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
1 x | ORACOVER Ferrari red (2 m) |
1 x | Release wax 250ml |
2 x | 500 ml sealer (DOPE) |
2 x | Nitroverdu 500 ml |
2 x | |
1 x | Spray Graphit 33 |
2 x | Solvent Plasti Dip 1000 ml |
1 x | PARTALL® Hi-Temp Wax, 340 g |
2 x | Plasti Dip Liquid Tape 429 ml black |
2 x | Painting GHT Lexan Black 150 ml |
1 x | Presto SF Light Filler styrene-free (420 g) |
1 x | Spray YELLOW Inca Lexan 150ml |
1 x | Universal Colour Paste deep black 50 g |
1 x | Paint gun for sprays |
1 x | Spray adhesive INFUTAC (Clear) 500 ml |
1 x | Universal Colour Paste deep black 250 g |
1 x | 20 g tin paste |
3 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
2 x | Spannlack 1000 ml |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | 18 mm reinforced hinge |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Miniature brass strap hinge, 1 m |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | 15 mm reinforced hinge |
1 x | PIX Hawk with accesories |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Micro flex hinge (12 uds) |
2 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Medium pin type hinge (12 uds) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Long pinned hinge (6 uds) |
1 x | Long pinned hinge (12 uds) |
1 x | |
1 x | 3,0x60 mm allen screwdriver |
1 x | Mobile Terminal |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
4 x | Tape GFK 38 mm |
3 x | SE Ring 350 mm (2 pcs) |
3 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
3 x | Spikes Band (5 m) |
2 x | SE Ring 480 mm (2 pcs) |
2 x | SE Ring 400 mm (2 pcs) |
3 x | SE Ring 240 mm (2 pcs) |
1 x | Oracover Azul 2 m |
1 x | Oracover Black 2 m |
3 x | Marker ties (20 pcs) |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Electric rocket starters (6 pcs) |
1 x | "M" set |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m |
2 x | Initior Receiver FRX2 Wireless |
1 x | Fibra de vidrio 80 g/m² (5 m x 100 cm) |
1 x | Glass fabric 425 g/m² aero,10x1m |
1 x | Chopped glass fibre strands 3 mm |
1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 10m |
2 x | Black smoke bombs AX-60 (5 pcs) |
1 x | White smoke bombs AX-3 (10 pcs) |
1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | Fiberglass 5000x1100 mm 49 g/m² |
1 x | Remote electric ignition system |
1 x | Glass fabric 80 g/m² (plain) 100 cm, roll/ 20 m Aero Finish |
2 x | SE Ring 330 mm (4 pcs) |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 20m |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m |
1 x | Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav |
1 x | 290 mm 8x4 M4 shaft ship |
2 x | 38 mm fenders (10 pcs) |
2 x | 3 mm Leader (L 100 mm) |
1 x | 10 mm portholes (10 pcs) |
1 x | 33,0 mm propeller (left propeller) |
1 x | 14 mm Portholes for screws (10 pcs) |
1 x | 40,0 mm hydro-propeller (left hydropropeller) |
1 x | 12 mm dogdrive props |
1 x | 290 mm M5 Prop shaft |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | Body for landing gear Ø 3 mm |
1 x | Landing gear strap small (4 uds) |
1 x | Landing gear clamp for Ø 4 mm (4 uds) |
1 x | Nylon threaded block M4 (2 uds) |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Adapter lead MPX/XT60 |
1 x | 4 LiPo XH>EH adapter |
3 x | Birch plywood plate 600x300x2.0 mm |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
3 x | Birch plywood plate 600x300x2.5 mm |
3 x | Birch plywood plate 600x300x3.0 mm |
1 x | CC 01 |
1 x | Cabel charger transmitter GRAUPNER |
1 x | 2 LiPo XH>EH adapter |
1 x | Antenna Hole Cap V1 (Silver) |
1 x | Oracover CHROME 2m |
1 x | PPM Encoder Module |
2 x | Tube Pitot to PIXHAWK |
1 x | Alfileres de cobre 0,7 x 7 mm, aprox.50 g |
2 x | Cinta Goldfix 1m |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | 25,0 mm 3-BL M4 hydro-propeller (left hydropropeller) |
1 x | 290 mm M4 7/8x212 mm shaft ship |
1 x | CARBON CUB 15cc ARF 2280 mm |
1 x | PILATUS PC-6 Turbo Porter 33% 5.290 mm |
1 x | Bidule 111 3000 mm Canopy |
1 x | Bidule 55 V3 2460 mm |
1 x | CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9) |
1 x | Bidule 170 ARF 3.48 m |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | SE Ring 200 mm (2 pcs) |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
2 x | Birch plywood plate 600x300x4.0 mm |
3 x | Birch plywood plate 600x300x1.2 mm |
2 x | A/C quality beech plywood 600x300x6.0 mm |
2 x | A/C quality beech plywood 600x300x1.5 mm |
2 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | PROFI TX fastening rings |
1 x | Futaba Multi-Switch 16 DECODER |
1 x | Ojos de buey 13x9x6 mm (20 pcs) |
1 x | Coupling for 3 mm axis |
1 x | Transom 40 mm |
1 x | Red position light 3V 7x2 mm (2 pcs) |
1 x | 290 mm M4/4 mm Prop shaft |
1 x | White Thread 0.50 mm x 20m |
1 x | Brass wire 0.30 mm (25 m) |
1 x | Soporte barandilla madera 16 mm (10 pcs) |
1 x | Soporte barandilla madera 10 mm (10 pcs) |
1 x | Top light bright 10mm/3V (2 pcs) |
1 x | Sheave Pl. 2R. 3 mm |
1 x | Propeller 3BL 30 mm M4 plastic Left |
1 x | Lancha neumatica 95 mm |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Female connector for 12 pines AWG |
1 x | wing/fuselage connector for 12 pines AWG 20-24 |
2 x | Birch plywood plate 600x300x1.5 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | wing/fuselage connector for 16 pines AWG 20-24 |
2 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Male connector for 6 pines AWG |
1 x | Magnetic Interruptor MULTIPLEX |
1 x | Propeller Pleg CAM Carbon 12x8 |
1 x | FALCON 29X9 CARBON PROPELLER (GAS) |
1 x | FALCON 25X9 CARBON PROPELLER (GAS) |
1 x | 20,5x14,5 Falcon electric V2 (40 g) |
2 x | A/C quality beech plywood 600x300x8.0 mm |
1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
2 x | Balsa panel 10x100x1000 mm |
2 x | A/C quality beech plywood 600x300x6.0 mm |
2 x | Balsa panel 8.0x100x1000 mm |
2 x | A/C quality beech plywood 1520x750x4.0 mm |
1 x | Lite Plywood panel 600x300x3.0 mm |
2 x | Lite Plywood panel 600x300x2.0 mm |
2 x | Birch plywood plate 600x300x2.0 mm |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Yellow smoke canister 65 g |
1 x | Initior Transmitter FTX2 Wireless |
1 x | PCARD Wireless System |
1 x | Red smoke canister 140 g |
1 x | Yellow smoke canister 100 g |
1 x | Glass fibre sleeve Ø 20 mm |
1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
1 x | B4-0 rocket charges (6 pcs) |
1 x | Swicht F14/FC-16 (3 pos) |
1 x | COPILOT Multiplex |
1 x | Futaba Multi-Switch 16 MODUL |
1 x | Potenciometro micro |
1 x | Lancha salvavidas 58 mm (5 pcs) |
1 x | Davit 70 mm (2 pcs) |
1 x | Noray doble 9 mm (2 pcs) |
1 x | Doppelpoller 7 mm plastic (10 uds) |
1 x | Boat 43 mm (5 pcs) |
1 x | Cleat 15 mm (2 pcs) |
1 x | Picas 12 mm (20 pcs) |
1 x | Mounting base Ms 12 mm |
1 x | Ringöse 12 mm (50 pcs) |
1 x | Molinete / Cabestrante amarre Scale 1:32 |
2 x | wooden stairs (kit) 70 mm |
1 x | Top light Red 10mm/3V (2 pcs) |
1 x | 14 mm portholes (10 pcs) |
1 x | Propeller RABOESCH.Ms 60L (5 Blades) (Left hydropropeller) |
1 x | Fan metalic 21 mm |
1 x | Anodized aluminium servo M4x5/8 screw (4 black pcs) |
1 x | Bisagra de remo metal 28 mm de largo (2 pcs) |
1 x | Propeller RABOESCH.Ms 35mm/M4r 5-BL (rigth hydropropeller) |
1 x | Propeller RABOESCH.Ms 35mm/M4r 5-BL (left hydropropeller) |
1 x | Marco de medición doble 35 mm (2 pcs) |
1 x | Cadena 1.0mm x 1 m |
1 x | Propeller 3BL 50 mm M4 Plastic |
1 x | Klumpblock (Plastik), Höhe 8 mm, 2 Rille, 20 Stück |
1 x | Lancha salvavidas Kutter .Ösen 43 mm (5 pcs) |
1 x | Housing Ø 4 mm (2 pcs) |
1 x | Feedthroughs 4 mm |
1 x | Capstan of plastic 91x44x45 mm |
1 x | Pump 12 V |
1 x | Sheave Pl. 2R. 12 mm |
1 x | Cornamusa 8 mm plastico (10 pcs) |
1 x | Antiaircraft gun 10.5 cm (2 pcs) |
1 x | Repair set for RAB0108-31 |
1 x | Ojos de buey 5 mm (10 pcs) |
1 x | Compass Ø 15 mm (20 pcs) |
1 x | Propeller 3BL 35 mm M4 plastic Left |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Cable with accesories |
1 x | Horn mando small (2 pcs) |
1 x | Micro control horn (2 pcs) |
1 x | Horn with ball 40x30 |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Horn DUBRO 1/2A |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Small aluminium horn gold (2pcs) |
1 x | Control horn long w/ball |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Horn with ball 55x40 |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
1 x | JETImodel DPS 40 |
1 x | Male connector for 12 pines AWG |
1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
1 x | Extension 5 lipos JST/C |
1 x | EWC6 40 cm wing connector |
1 x | Extension 2/3 lipos JST - JST/C |
1 x | Extension 5 lipos JST - JST/C |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | FX three-position switched channel, long |
1 x | Interruptor SPS 70v 60/120A |
1 x | Teflon rollers 80 mm x 15 mm Diam. |
1 x | DPSI magnetic switch actuator (housing) |
1 x | Hacker X-Pro USB interface V2 |
1 x | wing/fuselage connector for 3 pines AWG 20-24 |
1 x | Interruptor RX/Batterie |
1 x | Male Prolonger TP 4/5S |
1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | EWC3 40 cm wing connector |
1 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | EWC3 100 cm wing connector |
1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
1 x | Extension 5 lipos JST/C - JST |
1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | Female connector for 6 pines AWG |
1 x | Male connector for 10 pines AWG |
1 x | Long Switch On/Off micro |
1 x | Extension 6 lipos XH > EH |
1 x | Male connector for 16 pines AWG |
1 x | Electronic switch JETI SP6 0-15v/6A |
1 x | JETImodel SINGLE BEC |
1 x | JETImodel Addcap 1640 |
1 x | Male connector JST SH 1.0mm with 10 cm wire |
1 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | Interruptor SAFET-SWITCH 12HV Twinbatt |
1 x | Extension 2/3 lipos JST/C |
1 x | Female connector for 16 pines AWG |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Propeller Pleg CAM Carbon 12.5x7.5 |
1 x | Propeller Pleg CAM Carbon 14x6 |
1 x | Propeller Pleg CAM Carbon 14x9 |
1 x | SIG Coverall 1.2x1.8 m |
1 x | Propeller Pleg CAM Carbon 10x4 |
1 x | Propeller Pleg CAM Carbon 14x10 |
1 x | Propeller Pleg CAM Carbon 11x8 |
1 x | Propeller Pleg CAM Carbon 11x7 |
1 x | Propeller Pleg CAM Carbon 11x10 |
1 x | Propeller Pleg CAM Carbon 15x6 |
1 x | FALCON 26X10 CARBON PROPELLER (GAS) |
1 x | 25 mm reinforced hinge |
2 x | 60 mm aluminium spinner (Kavan) |
2 x | Blade holder metal LAMA |
2 x | Crawler GRE-24 RTR 1:24 Arena |
1 x | Concave-Convex sandpaper file 13 mm |
1 x | 33,0 mm propeller (rigth propeller) |
1 x | Turbo light spinner cap white 32mm |
![](images/pixel_black.gif) |
18,431.61EUR |