1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
2 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
2 x | Carbon fiber rod 20 mmx1000 mm |
2 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Covered closure or fairings |
1 x | Steering arm 16 mm Ø 4 mm |
2 x | Screw-lock connector M2 (2 uds) |
2 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
2 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
2 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | SUS wire 3m (nylon coated) |
2 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Bungee HLG Premium |
2 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
2 x | ABS angle 5,0x5,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | L-Connector 1.0 mm x 1000 mm |
4 x | L-Connector 1.5 mm x 1000 mm |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
3 x | ABS "T" angle 8.0x8.0x1000 mm |
2 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
2 x | ABS "T" angle 10.0x10.0x1000 mm |
2 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
2 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Long pinned hinge (12 uds) |
1 x | CC 05 |
1 x | Digital precision scale up to 2000 g |
2 x | Landing gear frontal support 29x26x13,5 |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Pushrod greyline 3/2 with coupler M2 |
2 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Xplorer4 anemometro |
1 x | Wheel collar 3 mm Ø (4 uds) |
2 x | Pushrod octagone 3/2 |
2 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Landing gear frontal support 25x32x16 |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Hot Glue Stick BLACK |
1 x | Pushrod octagone 4/3 |
1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
3 x | ABS angle 4,0x4,0x1000 mm |
1 x | Profile ABS triangular 6.0x1000 mm 90º |
3 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | ABS angle 10,0x10,0x1000 mm |
4 x | Profile ABS half cane 2.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
2 x | L-Connector 4.0 mm x 1000 mm |
1 x | Profile ABS half cane 3x1000 mm |
3 x | Profile ABS triangular 4.0x1000 mm 90º |
1 x | Rubber profile 6-2 mm 2M |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
3 x | Profile ABS half cane 6.0x1000 mm |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Profile ABS half cane 4x1000 mm |
2 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | ABS angle 2,0x2,0x1000 mm |
4 x | Rubber profile 8-2 mm 2M |
1 x | |
1 x | 1/6 Pilot "John" |
1 x | Piloto Jet "Red" 1/6 Scale |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | 1/6 Pilot "Garry" |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | 1/6 Pilot "Tony" |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | LOGO 600 SX (kit) |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Allen wheel collar M4x4 |
2 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | Wheel collar 6 mm Ø (4 uds) |
2 x | 28x5 mm wires output (2 pcs) |
1 x | Xoar Electric Beechwood Prop 22x10 |
1 x | Tip wing protector 30x10 (2 pcs) |
2 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
1 x | Bags de Luxe ASPIRE |
1 x | Bags wings/rudder ASPIRE |
1 x | Propeller 3x3 |
1 x | 9x4.7 * 22x12 carbon propeller |
1 x | Pushrod octagone 3/2 with coupler M2 |
2 x | 11 mm Rubber pads (14 pcs) |
1 x | SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm |
1 x | IKARUS plane |
1 x | LASER 73" 1.85m (05) PILOT |
2 x | 100 mm rods set for direction control |
1 x | FUELING VALVE GASOLINE LARGE (1PC) |
2 x | Cap closure 33/23.5mm (2 uds) |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Allen wheel collar M3x5 |
1 x | Cable tie mounts 4.3 (4 uds) |
2 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Balsa panel 10x100x1000 mm |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Anodized aluminium servo M3x16 screw (4 red pcs) |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Propeller 8x4,3 SlowFlyer |
1 x | BALSA leading edge 8x10x1000 mm |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | Propeller 9x7 SlowFlyer |
2 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Snap long M2 (10 uds) |
1 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
1 x | Split M1,2x10 (10 pcs) |
1 x | EXTRA 330SC-E 95" Orange/Blue/White |
1 x | 1/10 Pilot "Jimmy" |
1 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
1 x | Smokelance |
1 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Tygon tube 4.8 x 3.2 mm 15 m |
1 x | Blind nut M8 (10 pcs) |
2 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | Prop Shaft Adapter 5 mm "long" |
1 x | 3.2 mm Prop Adapter M8 |
1 x | Canopy Latch |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Clip fixing for wing (2 pcs) |
1 x | Allen wheel collar M3x3 |
1 x | 90 mm rods + T patellas set for direction control |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | 140 mm rods set for direction control |
1 x | 45 mm rods set for direction control |
1 x | 100 mm rods + T patellas set for direction control |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | Allen wheel collar M4x6 |
1 x | 45 mm rods + T patellas set for direction control |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | Profile ABS half cane 5.0x1000 mm |
1 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | Profile ABS half cane 7.0x1000 mm |
1 x | 250 mm / 16 mm Airbrakes |
1 x | 140 mm rods + T patellas set for direction control |
1 x | 2,3 mm Prop Adapter M6 |
1 x | 3.2 mm Prop Adapter M6 |
1 x | 4 mm Prop Adapter M6 |
1 x | 3.17 mm Prop Adapter CN-Spinner |
1 x | Connector CAN 15 |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
|
6,311.66EUR |