1 x | Wing OXY 0,5 pulgadas2 |
2 x | Cable video GoPro and 5V cable |
1 x | Spray EC Red 400ml |
1 x | Tape GFK 25 mm |
1 x | 200 mm extensión servo HITEC/JR |
1 x | Strip 1,5x1,5x330 mm |
2 x | Tow hook for tug |
2 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Release wax 250ml |
1 x | 500 ml sealer (DOPE) |
1 x | Strip 3,5x1,75x330 mm |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Cinta Goldfix 1m |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Solvent Plasti Dip 1000 ml |
1 x | Spray YELLOW Inca Lexan 150ml |
2 x | Vasa model Catapult |
2 x | Prolongador S-Bus JR/JR 10cm |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | ABS tube 2.0x1.0x1000 mm |
2 x | Angle measurer |
2 x | Adjustable launching hook |
2 x | Futaba Female 40 cm extension |
1 x | Nitroverdu 500 ml |
2 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
3 x | Spikes Band (5 m) |
1 x | Strip 2,5x1,25x330 mm |
1 x | LOWER TOW HOOK |
1 x | Round Rod 5,0x1000 mm |
1 x | Premium servo extension 100cm |
2 x | Propeller balancer |
1 x | Truck-trailer for gliders 720 x 239 mm |
2 x | SE Ring 400 mm (2 pcs) |
2 x | Field folding model stand |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Marker ties (20 pcs) |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
2 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | PARTALL® Hi-Temp Wax, 340 g |
1 x | Presto SF Light Filler styrene-free (420 g) |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
1 x | Interface Jack Adapter IKARUS |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | 5 line servos wire black (1 m) |
1 x | 50m servo "Premium" wire (white/red/blue) |
1 x | Screwdriver for Hexagon 1,27mm |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Crimping tool |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | Screwdriver for Torx® TX8 |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Horn for flap control (1 pcs) |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
1 x | Hexagonal ball head 2.0 x 50 mm |
1 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
1 x | Brass control horn M4 short for wire (10pcs) |
3 x | Blades 330mm |
1 x | Head lower part |
1 x | Cierva C30 simulated motor |
3 x | LA500 nose |
3 x | Motor OS 3820-1200 electric |
1 x | Spinner fixed propeller 42 mm / 5,0 mm |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | ABS tube 10.0x8.0x1000 mm |
3 x | LA500 housing-lower cyclic |
1 x | Micro Tarjeta SD Rapid Rush 16 GB |
1 x | LA500 pre-rotation gear |
2 x | LA500 ciclic lever |
2 x | Head core |
2 x | Eachine EV800D 5 Inches 800x480 FPV VR Goggles Monitor |
2 x | Blade holder center |
2 x | Head runner |
2 x | Cierva C30 Body Spain |
2 x | Ball joint long |
2 x | Cierva C30 Elevator |
1 x | Head spacer |
1 x | Blade holder lower |
2 x | Head upper part |
2 x | LA500 housing-upper cyclic |
1 x | LA500 front gear holder |
1 x | LA500 pilot-seat set |
2 x | Cable video GoPro |
2 x | Bearing housing |
2 x | Blade holder center GFK 0,5 mm |
1 x | 5.8G Receiver Helical Antenna with protecting case (SMA plug) 12 |
3 x | Anntena Panel 5,8 GHz - 14 dBi |
2 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | WingFix ULTRA Black Edition |
1 x | 20x200 mm battery rings |
1 x | SE Ring 480 mm (2 pcs) |
1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Copier 2x20 cm pcs |
1 x | 3,0x60 mm allen screwdriver |
1 x | Extension 7.5 cm |
1 x | 100g Flux Paste for Silver Solder |
1 x | Extension silicon 10 cm (Graupner) |
1 x | Boxed KIT OF 7 Rotary Burrs FINE |
1 x | SSPS105 Super Hi-Power servo |
1 x | ABS tube 3.0x2.0x1000 mm |
2 x | Angle of incidence meter |
1 x | Field folding model stand SebArt |
1 x | Surface Indicator Gauge Small |
1 x | Medidor ángulos y/o incidencias |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | SERVO HOLDER |
1 x | Towing hook |
1 x | Light System |
1 x | SE Ring 330 mm (4 pcs) |
2 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
2 x | SE Ring 350 mm (2 pcs) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | SE Ring 240 mm (2 pcs) |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | SE Ring 360 mm (2 pcs) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm) |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube (L 1000 mm, Ø8 mm, Ø6 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | Ball Link Plier |
1 x | Digital weight, angle and balance meter BASIC |
1 x | Futaba male 40 cm extension |
1 x | Extension silicon 100 cm (Graupner) |
1 x | Extension silicon 75 cm (Futaba) |
1 x | Prolongador S-Bus JR/JR 20cm |
1 x | Extension silicon 30 cm male (Futaba) |
1 x | Digital precision scale up to 2000 g |
1 x | 2,0x50 mm allen screwdriver |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | Extension lead 15 cm Multiplex |
1 x | Towing hook <3m |
1 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
1 x | Concave-Convex sandpaper file 13 mm |
1 x | Extra Hard Titanium Herxagon Screwdrivers |
1 x | EC-Cutter |
1 x | Extension silicon 50 cm (Futaba) |
1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Canopy Latch |
1 x | Servo MKS HV1220 |
1 x | PS-050 TONEGAWA Servo |
1 x | Servo MKS HV69 |
1 x | PowerPack 2.5X2 PRO |
1 x | DUPLEX 2.4EX Central Box 220 |
1 x | Servo TOPMODEL DS1413 T |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Transmitter COCKPIT SX 12 M-Link (only Tx) |
1 x | Extension silicon 75 cm (Graupner) |
1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
1 x | Extension PVC 150 cm (Graupner) |
1 x | 58 mm micro servo cover |
1 x | PPM Encoder Module |
1 x | Pegamento Pu R 50g polyuretano |
1 x | Grub screw M3x3 shouldered (2 pcs) |
1 x | PYRO 750-50L Competition |
1 x | PYRO 800-48 Long Axi |
1 x | PYRO 650-103 Long Axi |
1 x | KIRA 480-34 |
1 x | KIRA 400-27 |
1 x | PYRO 700-45 Long Axi |
1 x | Antenna Hole Cap V1 (Silver) |
1 x | Transmitter Balancer Futaba FF9-DX7-JR-Hitec |
1 x | Transmitter Balancer Futaba T-10CG |
1 x | Screw M3x16 |
1 x | LA500 cyclic central part |
2 x | Cierva C30 spanish decoration Stickers |
1 x | KIRA 600-20 6,7:1 |
1 x | PYRO 750-50L |
1 x | KIRA 480-38 |
1 x | Motor OS 3805-1200 electric |
1 x | Motor wall |
1 x | Motor rotor LA-500 |
1 x | Nut M2 |
2 x | Head core bushing |
1 x | Screws M1,6x6 Allen |
1 x | LA500 Blades |
1 x | Rotorshape Elevator |
1 x | LA500 tail empennage |
1 x | Raer wall |
1 x | Blade holder upper |
2 x | Bearing 3x6x2,5 |
1 x | Rotorshape Autogyro |
1 x | Piñon motor rotor LA-500 |
1 x | LA500 pre-rotation gear hub |
2 x | LA500 Autogyro |
2 x | Battery plate |
1 x | LA500 freewheel bearing |
1 x | Head lower part New |
1 x | LA500 rotor head shaft |
1 x | Rotor Mast |
1 x | PYRO 900-52L |
1 x | Combo AM480 T-Motor 650 Kv |
1 x | KIRA 500-26 6,7:1 |
1 x | KIRA 600-30 6,7:1 |
1 x | KIRA 500-30 6,7:1 |
1 x | PYRO 600-12 |
1 x | KIRA 500-36 6,7:1 |
1 x | KIRA 600-22 6,7:1 |
1 x | KIRA 400-34 |
1 x | PYRO 700-45 |
1 x | PYRO 600-11 |
1 x | DRIVE 550 (KIRA 500-26 6,7:1 + KOBY 55 LV) |
1 x | MAMBO 17 |
1 x | PYRO 800-40 Long Axi |
|
15,124.19EUR |