| 2 x | Propeller balancer |
| 1 x | Angle measurer |
| 1 x | Surface Indicator Gauge Small |
| 1 x | Truck-trailer for gliders 720 x 239 mm |
| 1 x | Field folding model stand |
| 2 x | Medidor ángulos y/o incidencias |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | CC 03 |
| 1 x | TP/TopFuel - XH 2/3S Adapter |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 2 x | BALSA trip 10x10x1000 mm |
| 2 x | BALSA trip 3.0x3.0x1000 mm |
| 2 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Extractor piñones 2.3/3.2 mm |
| 2 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 2 x | TrainerCord (master-learner) |
| 2 x | Pine wood slat 5.0x5.0x1000 mm |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 2 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 2 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | CM-3 |
| 1 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 1 x | One touch canopy lock |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | Cierre cabina aluminio Ø4, I=10 mm |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 2 x | Canopy Latch |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Cockpit plastic closing |
| 1 x | ABS Strip 1.5x8.0x1000 mm |
| 1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
| 1 x | Strip ABS 2.0x5.0x1000 mm |
| 1 x | Ball link M2,5 (10 pcs) |
| 1 x | ABS I Strip 10x5x1000 mm |
| 1 x | |
| 1 x | Fixed launching hook |
| 1 x | Oracover Green10 m |
| 1 x | Field folding model stand SebArt |
| 1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
| 1 x | SPARK Switch 12v |
| 1 x | Balsa panel 4.0x100x1000 mm |
| 1 x | Liston HAYA 3 x 10 x 1000 mm |
| 1 x | wing/fuselage connector for 3 pines AWG 20-24 |
| 1 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 1 x | Female connector for 10 pines AWG |
| 1 x | EWC3 40 cm wing connector |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Male connector for 16 pines AWG |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | Short Switch On/Off micro |
| 1 x | Connector Sub-D 2+5 Male |
| 1 x | USB HLS prog. interface |
| 1 x | FX three-position switched channel, long |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | Balsa panel 2.5x100x1000 mm |
| 1 x | Male connector for 12 pines AWG |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | Cable video GoPro and 5V cable |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | Balsa panel 6.0x100x1000 mm |
| 1 x | SPARK Switch 7.4v |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | Selfstart electronic switch |
| 1 x | CC 05 |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | SPARK Switch 5.9v |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | TX 250 mW especial GOPRO |
| 1 x | Adapter lead MPX/EC3 |
| 1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
| 1 x | Window mounting channel 5m |
| 1 x | 80 mm rods set for direction control |
| 1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
| 1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
| 1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
| 1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
| 1 x | U Profile ABS 3,0x6,0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
| 1 x | Carbon fiber flat 1000x6.0x0.8 mm |
| 1 x | Carbon fiber flat 1000x3.0x0.13 mm |
| 1 x | Windsock Ozone L -1200 mm |
| 1 x | 3,2 mm Prop Adapter M5 |
| 1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
| 1 x | WingFix ULTRA Black Edition |
| 1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
| 1 x | 45 mm rods set for direction control |
| 1 x | Cable grommet Ø 3.2 mm (4 uds) |
| 1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
| 1 x | Cockpit aluminium closing 5.4g |
| 1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
| 1 x | POLARON EX 800w charger |
| 1 x | Adjustable brass horn threaded M3 |
| 1 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
| 1 x | Coupling bush 5 - 5 mm |
| 1 x | Receiver replacement antenna, approx. 15 |
| 1 x | Propeller Pleg CAM-Prop 10x6 + Spinner |
| 1 x | Mini Infrared Thermomiter |
| 1 x | Transmitter Crystal 35 Mc/s Ch 62 |
| 1 x | Quick hose connector 6-4 mm |
| 1 x | Spinner NUT M8x1,25 |
 |
| 2,180.67EUR |
temporarily out of stock
enought units
few units
