1 x | Para-RC "RC-Evo-Cross" Rescue |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
2 x | BALSA triangular 10x10x1000 mm |
1 x | Tow hook for tug |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | ABS tube 12.0x10.0x1000 mm |
2 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | Allen wheel collar M3x5 |
1 x | 1/6 Pilot "Tony" |
1 x | Allen wheel collar M4x4 |
1 x | Beech dowels 2.0 x 1000 mm |
2 x | 1/12 Pilot "Cougar" |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
1 x | Pilot "Duke" Legends Series (Slimline) |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
1 x | 11 mm Rubber pads (14 pcs) |
1 x | 1/4 Pilot "Mike" |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Long pinned hinge (12 uds) |
1 x | 1/12 Pilot "Tom" |
1 x | Cable grommet Ø 4 mm (4 uds) |
2 x | Small pinned hinge (12 uds) |
1 x | 1/10 Pilot "Jimmy" |
1 x | Towing hook |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
2 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
2 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Miniature brass strap hinge, 1 m |
2 x | BALSA triangular 6x6x1000 mm |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | Allen wheel collar M3x3 |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | 140 mm rods set for direction control |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | Piloto JET 1:3,5 |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Beech dowels 4.0 x 1000 mm |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | ABS tube 5.0x3.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Liston HAYA 10 x 10 x 1000 mm |
2 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Cable coupler M2x66 (2 uds) |
1 x | Cable coupler M3 (10 uds) |
1 x | PropCover 16-20" (1 pcs) |
1 x | PropCover 16-20" (2 pcs) |
1 x | Cable coupler M3 (10 uds) |
1 x | Cable coupler M2 (10 uds) |
1 x | Cable coupler M2,5 (2 pcs) |
2 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
2 x | BRASS CONTROL HORN M3x16 mm 2pcs |
2 x | Complete kit CAT 966G II WEDICO-construction-models |
2 x | Propeller POWER-PROP 7x7 |
2 x | Kit wheel loader 966G II without electrics, without hydrauli |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm) |
1 x | T-Hose connector 4-4-4mm |
1 x | Legs + electric brakes for Viper Jet 1700 mm |
1 x | Oracover GREY Seafire Sea 2m |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | Buy Perforated film 100 cm / 10 m |
1 x | Vasa model Catapult |
2 x | 15 mm reinforced hinge |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Allen wheel collar M4x6 |
1 x | Glass fabric 25 g (2 m²) |
1 x | 1/7 Pilot "Japanese" |
1 x | Flap hinge (6 pcs) |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Gates hinge aluminium (1 pcs) |
1 x | Pilot "Dick" Legends Series (Slimline) |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
2 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Glass fabric 163 g/m² 130cmx5m (Interglas 92105, aero, finish |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
1 x | Glass fabric 160 g/m² (Twill weave) 100 cm x 5m |
1 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
1 x | Fiberglass plate 620x540x3,2 mm |
1 x | Tip wing protector 30x10 (2 pcs) |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Pushrod octagone 3/2 |
1 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Adjustable launching hook |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Long pinned hinge (6 uds) |
1 x | Wheel collar 3 mm Ø (4 uds) |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Fiberglass plate 620x540x0,2 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | 1/6 Pilot "Cindy" |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Ventus 1:4 set of instruments |
1 x | Split M1,2x10 (10 pcs) |
1 x | Logo 400 SE VBar |
1 x | Landing gear frontal support 29x26x13,5 |
1 x | Tip wing protector 40x14 (2 pcs) |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
1 x | LOWER TOW HOOK |
1 x | Y-Hose connector 2-2-2 mm |
1 x | Landing gear strap large (4 uds) |
1 x | Quick hose connector 4-4 mm |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Oracover light Grey 2m |
1 x | Prop Holder AXI 41xx V2 |
1 x | Starter EM Gear Power 80 |
1 x | Refueling Cap V3 Black |
1 x | Extension MPX-MPX 20 cm |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Wire easy tensioner (red) |
1 x | Wire easy tensioner (silver) |
|
20,580.54EUR |