| 1 x | Fully Threaded Steel Rod M3 |
| 1 x | Flybar support metal LAMA |
| 3 x | Dummy motor GPW Wasp Scale 1/4 |
| 1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
| 2 x | 50 mm aluminium spinner (Kavan) |
| 1 x | Blade holder metal LAMA |
| 1 x | 10 mm aluminium spinner (Kavan) |
| 2 x | 55 mm aluminium spinner (Kavan) |
| 2 x | Cable coupler M3 (10 uds) |
| 2 x | 60 mm aluminium spinner (Kavan) |
| 1 x | Cable coupler M2 (10 uds) |
| 2 x | Engine mounts for .09 - .19 engine |
| 1 x | Recess mount-rem. glow plug set |
| 1 x | Epoxy 5min KAVAN 2x 100g |
| 1 x | Lipo KAVAN 3300 mAh 7.4v 40/80C |
| 1 x | Gasket electric Fuel Pump |
| 1 x | Lipo KAVAN 2200 mAh 11.1v 40/80C |
| 1 x | Microbalon filler for CA glues. Packaging bottle 20g |
| 1 x | Metal clevis M3 (10 uds) |
| 2 x | Surface Indicator Gauge Small |
| 1 x | KAVAN Threadlocker - Blue 10ml |
| 1 x | Lipo KAVAN 2200 mAh 11.1v 30/60C |
| 2 x | A/C quality beech plywood 600x300x0.8 mm |
| 2 x | Crawler GRE-24 RTR 1:24 Arena |
| 1 x | Window mounting channel 5m |
| 1 x | SlowFlyer control horn (3 pcs) |
| 1 x | LiPo KAVAN 3700 mAh 14.8v 40/80C |
| 1 x | Rubber Insert hard, 1 Pcs. |
| 1 x | GRE-18 RTR Crawler 1:18 Blue |
| 1 x | Rubber Insert soft, 1 Pcs. |
| 1 x | Propeller balancer |
| 1 x | Metal clevis M2 (10 uds) |
| 1 x | Propeller KAVAN 32x12 2-Bl |
| 3 x | Spinner 60 mm White (Kavan) |
| 1 x | Helice FOXY 22x10 2-Bl |
| 2 x | Spinner 55 mm White (Kavan) |
| 1 x | Brazo servo KAVAN doble aluminio 25T - 2.5" M3 |
| 1 x | Ciano KAVAN Medium 20g |
| 1 x | BETA 1400 RTF Red |
| 1 x | Birch plywood plate 600x300x1.5 mm |
| 1 x | Ball Link M2 with Ball and Hardware, 10 pcs |
| 1 x | Birch plywood plate 600x300x2.5 mm |
| 1 x | Debonder CA 20g |
| 1 x | BETA 1400 ARF Red |
| 1 x | Ciano KAVAN Super Thin 20g |
| 1 x | Conector MR-60 (pareja) |
| 3 x | 25 mm Sandpaper file |
| 1 x | |
| 1 x | Conector MT-60 (pair) |
| 1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 2 x | Turbina KINGTECH K260 G4 |
| 1 x | Spinner 40 mm Black (Kavan) |
| 1 x | Ferrita 17x10x6.5 mm |
| 1 x | Initior Transmitter FTX2 Wireless |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | Cabel "Y" 30 cm (Futaba) |
| 2 x | Superlight standard wheel 100 mm (2 pcs) |
| 1 x | Extension silicon 25 cm (Graupner) |
| 1 x | Ferrita con funda |
| 1 x | Stainless steel cable Ø 0.5 mm (20 m) |
| 2 x | Waterproof adhesive tape, width 19mm, length 25m |
| 1 x | Spray EC Red 400ml |
| 1 x | Glases Ace |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 3 x | Extension silicon 30 cm female (Graupner) |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Extension 100 cm (Futaba) |
| 1 x | Superlight wheel 125 mm with valve (2 pcs) |
| 1 x | Universal Colour Paste deep black 250 g |
| 1 x | Extension silicon 10 cm (Graupner) |
| 2 x | Universal Colour Paste white 50 g |
| 1 x | Superlight deluxe wheel 75 mm (2 pcs) |
| 1 x | Superlight deluxe wheel 62 mm (2 pcs) |
| 2 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Locking cable tie 4.6x203 (uds) |
| 1 x | Spray adhesive AEROFIX 2 |
| 1 x | Black smoke bombs AX-60 (5 pcs) |
| 1 x | Release wax 250ml |
| 3 x | Futaba male 40 cm extension |
| 1 x | Extension silicon 35 cm male (Futaba) |
| 1 x | Electric rocket starters (6 pcs) |
| 2 x | Cockpit plastic closing |
| 1 x | Superlight deluxe wheel 50 mm (2 pcs) |
| 1 x | SIG Coverall 1.2x4.5 m |
| 2 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
| 2 x | Extension lead 15 cm Multiplex |
| 1 x | SIG Coverall 1.2x0.9 m |
| 1 x | Paint gun for sprays |
| 1 x | Extension silicon 75 cm (Graupner) |
| 3 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | Red smoke bombs AX-60 (5 pcs) |
| 1 x | PARTALL® Hi-Temp Wax, 340 g |
| 1 x | Red smoke canister 65 g |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | 2,4x1000 mm 2:1 red termoretract tube |
| 1 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
| 1 x | Profile ABS half cane 4x2.5x1000 mm |
| 1 x | Profile ABS Square 1 x 1000 mm |
| 2 x | L-Connector 4.0 mm x 1000 mm |
| 1 x | 19 mm 2:1 black termoretract tube |
| 1 x | 20x1000 mm Ring Strap Back To Back |
| 1 x | ABS Strip 1.0x2.0x1000 mm |
| 1 x | SE Ring 330 mm (4 pcs) |
| 2 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | Strip 2,0x2,0x330 mm |
| 1 x | ABS Strip 1.0x3.0x1000 mm |
| 1 x | Foil for sticking flaps and ailerons |
| 1 x | Straightened threaded rod M2-1m |
| 1 x | Profile ABS Square 4 x 1000 mm |
| 1 x | 12,7x1000 mm 2:1 green termoretract tube |
| 1 x | MYLAR film A350 (1000x500 mm) |
| 1 x | Straightened rod Ø 2.5 mm x 1000 mm |
| 1 x | Brass rod Ø 0.5 mm x 1000 mm |
| 1 x | Brass rod Ø 1.5 mm x 1000 mm |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | Profile ABS triangular 6.0x1000 mm 90º |
| 1 x | ABS angle 2,0x2,0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
| 1 x | Round Rod 4,0x1000 mm |
| 1 x | Field folding model stand SebArt |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | ABS angle 4,0x4,0x1000 mm |
| 1 x | Straightened rod Ø 1.5 mm x 1500 mm |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | JETImodel SINGLE BEC |
| 1 x | AddCAP 10AS capacitors |
| 1 x | DUPLEX 2.4EX Expander E4 |
| 1 x | Transmitter Cadet 4Ch (V3) 2,4 GHz Mod.2 |
| 1 x | DUPLEX 2.4EX MT 300 EX |
| 1 x | Battery RX JETI LiIon RB 6200 7.2v |
| 1 x | Battery RX JETI LiIon RB 5200 7.2v |
| 1 x | DUPLEX 2.4EX Expander E2 |
| 1 x | DUPLEX 2.4EX MAlti (Rev.2) |
| 1 x | LiPo KAVAN 3700 mAh 11.1v 40/80C |
| 1 x | Metal ball clevis M3 (10 uds) |
| 1 x | PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX |
| 1 x | DUPLEX 2.4EX MULi 6s M |
| 1 x | TARANIS X9D - plus EU/LBT FrSky complete set w. travel case incl |
| 1 x | TARANIS Q X7 |
| 1 x | Servo GO-1280 MG 40 kg.cm 0.085s/60º |
| 1 x | USB programador GO servos |
| 1 x | |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Extension silicon 25 cm (Futaba) |
| 1 x | Steering arm 12 mm Ø 4 mm |
| 1 x | Split M1,2x10 (10 pcs) |
| 1 x | Split pin 1.6x16 mm (10 uds) |
| 2 x | Extension 7.5 cm |
| 1 x | Snap short M2 (10 uds) |
| 1 x | Wheel collar 3 mm Ø (4 uds) |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Split pin 1x8 mm (10 uds) |
| 1 x | Extension silicon 30 cm male (Futaba) |
| 1 x | 45 mm aluminium spinner (Kavan) |
| 1 x | Cabel "Y" 15 cm |
| 1 x | Wheel collar 6 mm Ø (4 uds) |
| 1 x | Extension silicon 100 cm (Futaba) |
| 1 x | Triple rod con. 2mm Pushrod (2 pcs) |
| 1 x | Extension 15 cm (Futaba) |
| 1 x | resin-hardener package L-385 with hardener H-385 (3.5 Kg) |
| 1 x | Futaba Female 40 cm extension |
| 1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
| 1 x | 200 mm extensión servo HITEC/JR |
| 1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
| 1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 1 x | 6 mm Prop Adapter M8 |
| 1 x | 2,3 mm Prop Adapter M5 |
| 1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
| 1 x | Profile ABS Square 3 x 1000 mm |
| 1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
| 1 x | PVC yellow transparent battery termo-retract 68 mm (1 m) |
| 1 x | PVC yellow-orange transparent battery termo-retract 57 mm (1 m) |
| 1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
| 1 x | Extension silicon 10 cm (Futaba) |
| 1 x | Premium servo extension 25cm |
| 1 x | Tip wing protector 40x14 (2 pcs) |
| 1 x | Extension silicon 30 cm female (Futaba) |
| 1 x | |
| 1 x | Epoxy Resin L (2.5 Kg) |
| 1 x | Wing bolts M3 Steel screw blue (2 pcs) |
| 1 x | Wheel collar 2 mm Ø (4 uds) |
| 1 x | Tip wing protector 28x10x12 (2 pcs) |
| 1 x | Cable S.BUS 3 salidas 300 mm |
| 1 x | Extension silicon 30 cm male (Graupner) |
| 1 x | Hardener Aero EPH 161 (250 g) |
| 1 x | Painting GHT Lexan Black 150 ml |
| 1 x | Futaba Female 40 cm extension |
| 1 x | Prolongador S-Bus JR/JR 10cm |
| 1 x | Pushrod octagone 3/2 |
| 1 x | 11 mm Rubber pads (14 pcs) |
| 1 x | Yellow smoke canister 140 g |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Spray YELLOW Inca Lexan 150ml |
| 1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
| 1 x | Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g |
| 1 x | Cabel "Y" 30 cm (graupner) |
| 1 x | Premium servo extension 50cm |
| 1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
| 1 x | Extension silicon 100 cm (Graupner) |
| 1 x | Spray adhesive INFUTAC (Clear) 500 ml |
| 1 x | Cockpit latch closing I=10 mm |
| 1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
| 1 x | 3 mm Long Prop Adapter M5 |
| 1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
| 1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
| 1 x | 3 mm Short Prop Adapter M5 |
| 1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
| 1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
| 1 x | U Profile ABS 2,0x4,0x1000 mm |
| 1 x | SE Ring 350 mm (2 pcs) |
| 1 x | ABS angle 1.5x1.5x1000 mm |
| 1 x | Ring 320 mm length (5 pcs) |
| 1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
| 1 x | SE Ring 250 mm (2 pcs) |
| 1 x | Marker ties (20 pcs) |
| 1 x | L-Connector 1.5 mm x 1000 mm |
| 1 x | Cross Connector 4.0 mm x 1000 mm |
| 1 x | FOAM - CURE™ (24g) |
| 1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 1 x | U Profile ABS 1,0x2,0x1000 mm |
| 1 x | Propeller FALCON 5-BL 24x23.5 |
| 1 x | 18x8 BIELA 3Bl propeller (3-blades) |
| 1 x | Propeller APC 10x6 Glow/Gas |
| 1 x | DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch |
| 1 x | Propeller APC 16x10 Glow/Gas |
| 1 x | Battery RX JETI LiIon RB 3100 7.2v |
| 1 x | Propeller MASTER AIRSCREW 9x6 |
| 1 x | Propeller MASTER 6x3,5 |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
| 1 x | Pegamento Pu R 50g polyuretano |
| 1 x | 16x10 BIELA propeller (3-blades) |
| 1 x | FALCON 24X12 CARBON PROPELLER (GAS) |
| 1 x | 18x10 BIELA pusher propeller |
| 1 x | FALCON 29X9 CARBON PROPELLER (GAS) |
| 1 x | 23x10 BIELA propeller (4-blades) Scale |
 |
| 12,767.93EUR |
