| 1 x | Small pinned hinge (12 uds) |
| 1 x | Flap hinge 33x9 mm (6 pcs) |
| 1 x | 25 mm reinforced hinge |
| 3 x | Gates hinge |
| 2 x | Gates hinge black 30x16 mm (2 pcs) |
| 2 x | Micro flex hinge (12 uds) |
| 1 x | Large flex hinge (12 uds) |
| 2 x | Gates hinge aluminium (1 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
| 1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 3 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 2 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 2 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 2 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | Long pinned hinge (6 uds) |
| 3 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
| 1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 1 x | Flap hinge (6 pcs) |
| 1 x | Red smoke canister 65 g |
| 1 x | CC 05 |
| 1 x | 30 cm BEC cable (female) |
| 1 x | 30 cm BEC cable (male) |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | Red smoke bombs AX-60 (5 pcs) |
| 1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
| 1 x | AX-60 starters (5 pcs) |
| 1 x | CC 03 |
| 1 x | Yellow smoke canister 65 g |
| 2 x | Mixers smoke bombs AX-60 (5 pcs) |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | White smoke bombs AX-9 (10 pcs) |
| 1 x | "M" set |
| 1 x | Remote electric ignition system |
| 2 x | Yellow smoke canister 140 g |
| 1 x | 3l Smoke oil |
| 1 x | CC 02 |
| 1 x | Initior Transmitter FTX2 Wireless |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 1 x | White smoke canister 65 g |
| 1 x | White smoke canister 140 g |
| 2 x | CM-3 |
| 1 x | Blue smoke canister 100 g |
| 1 x | White smoke bombs AX-60 (5 pcs) |
| 1 x | B4-0 rocket charges (6 pcs) |
| 1 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 1 x | Yellow smoke bombs AX-60 (5 pcs) |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | MPX-Dean "T" Adapter |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 2 x | Black smoke bombs AX-60 (5 pcs) |
| 1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
| 1 x | Z type of cable coupler Ø 1.8 (2 uds) |
| 1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
| 3 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
| 1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
| 1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 2 x | Threaded coupler M3 (10 uds) |
| 1 x | Kwik link AL M3 con Clip (2 pcs) |
| 1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 1 x | Couple M4 for wire (10 pcs) |
| 1 x | Ball link Aluminio M3 (2 pcs) |
| 1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
| 2 x | Z type of cable coupler Ø 1 (2 uds) |
| 1 x | Ball Link ALU M3 - RH (1 pcs) |
| 2 x | Ball Link M2 with Ball and Hardware, 10 pcs |
| 2 x | Ferrita con funda |
| 2 x | Ferrita 27x14x7 mm |
| 1 x | Big-Malibu XL Roof box with surfboard rack GREY |
| 1 x | 10m servo "Premium" wire (white/red/blue) |
| 1 x | Surface Indicator Gauge Small |
| 1 x | ABS tube 4.0x2.0x1000 mm |
| 1 x | Extra Hard Titanium Herxagon Screwdrivers |
| 1 x | Horn 13,5x16 mm (2 pcs) |
| 1 x | Glases Nimbus "Black" |
| 1 x | Spray adhesive INFUTAC (Clear) 500 ml |
| 1 x | 20 g tin paste |
| 1 x | Support conector MPX (6 pcs) |
| 1 x | Support FUEL DOT V3 |
| 1 x | Male Prolonger TP 4/5S |
| 1 x | Extension 2/3 lipos JST/C |
| 1 x | TP/TopFuel - XH 2/3S Adapter |
| 2 x | Battery RX JETI LiIon RB 2600 7.2v |
| 2 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | 4 LiPo XH>EH adapter |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | Connector CAN 15 |
| 1 x | Indoor hinge with servo arm integraded |
| 1 x | Aluminium battery holder red |
| 1 x | DPS Switch JR/JR |
| 1 x | DPSI magnetic switch actuator (housing) |
| 1 x | PSC 6 |
| 1 x | Connector Sub-D 2+5 Male |
| 1 x | Interruptor RX/Batterie |
| 3 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Small pinned hinge (6 uds) |
| 1 x | Universal batery Tester |
| 1 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 2 x | DPSI Ampere battery backer |
| 1 x | PowerPack 2.5X2 PRO |
| 1 x | Connector Sub-D 2+5 Female |
| 1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 2 x | LiIon Battery 3000 mAh 3.3v 15A (2 pcs) |
| 1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
| 1 x | 18 mm reinforced hinge |
| 1 x | Yellow smoke canister 100 g |
| 2 x | Wing tips support for AX-18/AX-60 (2 pcs) |
| 2 x | Red smoke canister 100 g |
| 2 x | Blue smoke canister 140 g |
| 1 x | SPARK Switch 5.9v |
| 1 x | AX-60 starters (5 pcs) |
| 2 x | Opto Gas Engine Kill Switch |
| 1 x | Fast'n EZ-CA-Hinge (12 uds) |
| 1 x | Green smoke canister 100 g |
| 2 x | Pulley brass 2,5/1 (2 pcs) |
| 2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 1 x | Threaded coupler M2,5 (10 pcs) |
| 1 x | Cable coupler M3 (10 uds) |
| 1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
| 1 x | Brass ball links BS M3 V1 (10 pcs) |
| 1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
| 1 x | Turnbuckle M2x29/43 (2pcs) |
| 1 x | Pulley brass 8/2 (2 pcs) |
| 2 x | Pull-Pull complet set with CF rudder double servo arm |
| 1 x | Round Rod 1.0x3.5 cm |
| 1 x | wire tensioner (silver) |
| 1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
| 1 x | Pulley brass 5/1,5 (2 pcs) |
| 1 x | Pulley brass 4/1,5 (2 pcs) |
| 1 x | Pulley brass 16/2 (2 pcs) |
| 2 x | Aluminium blue ball links M3 V1 (10 pcs) |
| 1 x | Wire easy tensioner (red) |
| 1 x | Kwik link AL M4 con Clip (2 pcs) |
| 2 x | wire tensioner (blue) |
| 1 x | Z type of cable coupler Ø 2 (2 uds) |
| 1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Turnbuckle M2,5x32/48 (2pcs) |
| 2 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 1 x | Ball link duraluminium M3 V1 (10 pcs) |
| 1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Long pinned hinge (12 uds) |
| 1 x | Rocket cardboard tube 25mm x 24mm x 230mm |
| 1 x | Ferrita 14x8x5.5 mm |
| 1 x | Epoxy Resin L + Hardener CL (60 min) kit/ 930 g |
| 1 x | resin-hardener package L-385 with hardener H-385 |
| 1 x | Thixotropic agent TM 100, tin/ 75 g (approx. 1 l) |
| 1 x | Mould Resin P 10 kg |
| 1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
| 1 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
| 1 x | Avia spare fouselage CF reinforced (Top Model) |
| 2 x | PWC4 wing/fuselage connector for 4 servos |
| 1 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
| 1 x | SPS Remote switch actuator |
| 1 x | BULLIT Wing 840 mm |
| 1 x | USB Interface REVOLECTRIX for CellPRO 10s |
| 1 x | Short Switch On/Off micro |
| 1 x | Truck-trailer for gliders 720 x 285 mm |
| 1 x | Opto Gas Engine Kill Switch |
| 1 x | SBEC Jeti |
| 1 x | Spring clamp for tube Ø29 mm ext 1pc |
| 1 x | Challenger ARF (Top Model) |
| 1 x | Truck-trailer for gliders 720 x 239 mm |
| 1 x | Bidule 170 ARF 3.48 m |
| 1 x | ARTIST 1.560 mm |
| 1 x | Electric spoiler 440 mm (2 pcs) |
| 1 x | White smoke canister 100 g |
| 1 x | Battery Protection Circuit Board 22.2v 6s |
| 1 x | DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch |
| 1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
| 1 x | DPSI RV Mini 6 (2008) |
| 1 x | DPSI Micro - RCS |
| 1 x | DPSI RV Mini 6 Magic |
| 1 x | EWC3 100 cm wing connector |
| 1 x | Battery RX JETI LiIon RB 5200 7.2v |
| 1 x | Battery EMCOTEC LiIon 3000 7.2v |
| 1 x | Robart Door Hinge (Pk2) |
| 1 x | DPSI Micro-DualBat 5.9V / 7.2V MPX-JR |
| 1 x | DPSI RV Mini 5 Magic |
| 1 x | Wing connector 8pin with pin strip, plug & socket |
| 1 x | Parachute expulsion foam |
| 1 x | MPX Sub-D Adaptor |
| 1 x | 63 mm INO spinner (carbon imitation) |
| 2 x | wire tensioner (black) |
| 2 x | Wire easy tensioner (silver) |
| 1 x | Central support Speed 600 |
| 1 x | Motor mount for 1 m models |
| 1 x | Shirt Hispano Aviación |
| 1 x | XPower XC5030/14 LS |
| 1 x | Ventral support for AX-18/AX-60 |
| 1 x | 15 mm reinforced hinge |
| 1 x | TrainerCord (master-learner) |
| 1 x | Spinner INO 51 mm Chrome (Imitacion metal) |
| 1 x | Spinner INOVA 102 mm Black |
| 1 x | Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs) |
| 1 x | Spinner Alumin. fixed propeller 50 mm / 3,2 mm |
 |
| 9,001.54EUR |
