| 1 x | Ventus 1:4 set of instruments |
| 1 x | Extractor piñones 2.3/3.2 mm |
| 1 x | Vasa model Catapult |
| 2 x | Glases Innovation Plus |
| 2 x | Glases Nimbus |
| 1 x | Glases Moritz |
| 1 x | Brass rod Ø 0.5 mm x 1000 mm |
| 2 x | Straightened rod Ø 2.5 mm x 1000 mm |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Covered closure or fairings |
| 1 x | Straightened rod Ø 14.0 mm x 1000 mm |
| 2 x | Straightened rod Ø 1.0 mm x 1000 mm |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | SUS wire 3m (nylon coated) |
| 1 x | Screw-lock connector M2 (2 uds) |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | Lock washer 3.2 mm (20 pcs) |
| 1 x | Circlik for shaft 2.3 mm (10 pcs) |
| 1 x | Spring lock washer 2.1 mm (20 pcs) |
| 1 x | Aluminium wide washer M3 blue (4 pcs) |
| 1 x | Flat washer 4.3 mm (20 pcs) |
| 1 x | Quicklock washer 3 mm (10 pcs) |
| 1 x | Circlik for shaft 1.2 mm (10 pcs) |
| 1 x | Aluminium wide washer M4 Gold (4 pcs) |
| 1 x | Quicklock washer 4 mm (10 pcs) |
| 1 x | Aluminium cap bolt washer M4 red (8 pcs) |
| 1 x | Aluminium wide washer M4 Red (4 pcs) |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | ABS Strip 1.0x4.0x1000 mm |
| 1 x | Extension 100 cm (Futaba) |
| 1 x | Profile ABS half cane 7.0x1000 mm |
| 2 x | Support FUEL DOT V3 |
| 2 x | Support XT60 conector (2 pcs) |
| 1 x | Aero-Master (Aero-naut) |
| 1 x | LUNAK 4,00 m |
| 1 x | Canopy Sweet / Siesta |
| 2 x | IKURA 4.0 m |
| 2 x | Fox MDM 1 4000 mm DeLuxe,Panel instrument Fox MDM 4m |
| 1 x | Fox MDM 1 4000 mm Std. |
| 1 x | Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models) |
| 1 x | LO 100 Scale 1:2 - Modellbau Bruckmann |
| 1 x | LO 100 ARC 3.3m |
| 1 x | Fascination 3600 mm ARC |
| 1 x | Canopy Astra |
| 1 x | Albatros ,spare fuselage (Top Model) |
| 1 x | HERON RR |
| 1 x | Fox MDM 1 4000 mm DeLuxe,wing joiner |
| 1 x | GP 15 JETA |
| 1 x | Astra (Top Model) |
| 1 x | Ion Pro NG electric with flaps ORANGE (JP Model) |
| 1 x | Electric spoiler 185 mm (2 pcs) |
| 1 x | BLANIK 50 V2 Silver/Blue (SebArt) |
| 1 x | Albatros ,spare cockpit (Top Model) |
| 1 x | Avia spare fouselage CF reinforced (Top Model) |
| 1 x | Glases Aspen |
| 2 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
| 1 x | Straightened rod Ø 4.0 mm x 1000 mm |
| 1 x | Brass rod Ø 1.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 1.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 5.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 8.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 0.8 mm x 1000 mm |
| 1 x | Brass rod Ø 1.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 1.5 mm x 1500 mm |
| 1 x | Cable grommet Ø 6.4 mm (4 uds) |
| 1 x | Snap for floding prop for 2 mm axi |
| 2 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 2 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
| 1 x | Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm) |
| 1 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
| 2 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
| 2 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m) |
| 1 x | Oracover light Grey 2m |
| 1 x | |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 2 x | Tape GFK 38 mm |
| 1 x | Cockpit aluminium closing |
| 1 x | Split pin 1x8 mm (10 uds) |
| 1 x | Lead with adhesive (2 pcs) |
| 1 x | Split pin 1.6x16 mm (10 uds) |
| 1 x | Horn DU-BRO 1/2 (2 pcs) |
| 1 x | Horn with ball 55x40 |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Micro control horn (2 pcs) |
| 1 x | RH long aluminium horn (2pcs) |
| 1 x | Horn 20x28,5 mm (2 pcs) |
| 1 x | Support Pitot JETI |
| 2 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Support Antena 2.4 Ghz (2 pcs) |
| 1 x | Ventus 2cx 4.5 m Winglets |
| 1 x | Kobuz 5000 mm (Airwold) |
| 1 x | Soporte grifo FESTO (2 pcs) |
| 1 x | 50N turbine start protection tube |
| 1 x | FOX MDM-1 3.500 mm ARF White |
| 1 x | Swift S1 De-luxe 3.730 mm |
| 1 x | SHK 4000 mm Scale 1:4.25 |
| 1 x | Fox MDM 1 6000 mm |
| 1 x | Swift S1 De-luxe 3.140 mm |
| 1 x | Ventus 2cx 4.5 m de Luxe |
| 1 x | LO 100 ARC 3.3m,frame canopy |
| 1 x | SOLOFOX 5m Voll-GfK |
| 1 x | 250 mm / 16 mm Airbrakes |
| 1 x | Sliding window 1:2,4 / 1.2,6 Scale |
| 1 x | Electric spoiler 300 mm (2 pcs) |
| 1 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
| 1 x | Siesta T tail (Topmodel) |
| 1 x | THERMIK XXXL 4,9m D-Box Electric |
| 1 x | OSD Telemetry sensor |
| 1 x | MYSTIQUE 2.9 m ARF |
| 1 x | Ka 8 B (Top Model) |
| 1 x | FUNRAY RR |
| 1 x | Q-12 2000 mm Electric |
| 1 x | Glases Stratus |
| 1 x | Prelude ARF 2500 mm, spare wing (TopModel) |
| 1 x | GM Propellers Spinner Scale ø 45mm Diameter, Motor shaft ø 6mm C |
| 1 x | IKURA GPS 4.28 m |
| 1 x | Ion Pro NG electric with flaps GREEN Fluor (JP Model) |
| 1 x | XENON RC (Aero-naut) |
| 1 x | Poerfly |
| 1 x | Propeller APC 13x10 Electric |
| 1 x | Propeller APC 11x4.7 SF |
| 1 x | Propeller APC 10x4.7 |
| 1 x | Spinner fixed propeller 42 mm / 5,0 mm |
| 1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
| 1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
| 1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
| 1 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
| 1 x | ABS tube 5.0x4.0x1000 mm |
| 1 x | Spinner plastic white fixed propeller 42 mm |
| 1 x | Spinner Alumin. fixed propeller 50 mm / 5,0 mm |
| 1 x | 102 mm INO spinner (carbon imitation) |
| 1 x | Spinner INO 63 mm Chrome (Imitacion metal) |
| 1 x | Marker ties (20 pcs) |
| 1 x | 45 mm black plastic spinner for fixed propeller |
| 1 x | Falcon Carbon Spinner 82mm for electric motor |
| 1 x | Spinner Alumin. fixed propeller 45 mm / 3,2 mm |
| 1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
| 1 x | Spinner Alumin. fixed propeller 45 mm / 5,0 mm |
| 1 x | Quick hose connector 3-3 mm |
| 1 x | T-Hose connector 2-2-2 mm |
| 1 x | Y-Hose connector 6-6-6 mm |
| 1 x | Racor "Y" 3 mm |
| 1 x | Conector FESTO M3 Quick 3mm 90º |
| 1 x | Quick hose connector 4-3 mm |
| 1 x | TAKEO 3.6m electric |
| 1 x | Birch plywood plate 600x300x1.2 mm |
| 1 x | Charger SKY RC e680 |
| 1 x | Propeller APC 12x8 Electric |
| 1 x | Propeller APC 10x3,8 SF Electric Pusher |
| 1 x | Propeller APC 13x8 Electric |
| 1 x | Propeller APC 11x4.7 SF Pusher |
| 1 x | Propeller APC 12x10 Electric |
| 1 x | Propeller APC 10x6 Electric |
| 1 x | Propeller APC 13x4 Electric Pusher |
| 1 x | Propeller APC 13x6.5 Electric Pusher |
| 1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | ABS tube 8.0x7.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
| 1 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
| 1 x | ABS tube 4.0x2.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
| 1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
| 1 x | ABS tube 8.0x6.0x1000 mm |
| 1 x | 20x1000 mm Ring Strap Back To Back |
| 1 x | 57 mm INO spinner (carbon imitation) |
| 1 x | Spinner Alumin. fixed propeller 45 mm / 4,0 mm |
| 1 x | F3A carbon 82 mm spinner for 12 mm axis |
| 1 x | F3A carbon 95 mm spinner |
| 1 x | Cono NUT 5/16"x 24 -M4 |
| 1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Spinner INOVA 45 mm White |
| 1 x | SE Ring 250 mm (2 pcs) |
| 1 x | Spikes Band (5 m) |
| 1 x | Spinner INO 57 mm Chrome (Imitacion metal) |
| 1 x | Spinner INOVA 102 mm Black |
| 1 x | SE Ring 240 mm (2 pcs) |
| 1 x | 36 mm white plastic spinner for fixed propeller |
| 1 x | Spinner Alumin. fixed propeller 50 mm / 6,0 mm |
| 1 x | Tape GFK 25 mm |
| 1 x | Spinner Alumin. fixed propeller 50 mm / 3,2 mm |
| 1 x | 36 mm black plastic spinner for fixed propeller |
| 1 x | F3A carbon 75 mm spinner for Hacker C-50 |
| 1 x | 82 mm INO spinner (carbon imitation) |
| 1 x | SE Ring 300 mm (2 pcs) |
| 1 x | Spinner plastic red fixed propeller 30 mm |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | F3A carbon 80 mm spinner for Spark EVO |
| 1 x | Foil for sticking flaps and ailerons |
| 1 x | 50 mm black plastic spinner for fixed propeller |
| 1 x | 75 mm INO spinner (carbon imitation) |
| 1 x | 89 mm INO spinner (carbon imitation) |
| 1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
 |
| 44,440.23EUR |
