| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
| 1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
| 1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 2 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
| 2 x | Beech dowels 2.0 x 1000 mm |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
| 1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
| 1 x | Liston HAYA 3 x 10 x 1000 mm |
| 2 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 2 x | Pine wood slat 5.0x5.0x1000 mm |
| 2 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
| 3 x | Pine wood slat 3.0x5.0x1000 mm |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | Ball link V1 Ø7 M4/3 (6 uds) |
| 2 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
| 1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
| 1 x | BALSA trip 6.0x6.0x1000 mm |
| 1 x | Kwik link AL M3 con Clip (2 pcs) |
| 2 x | Ball Link ALU M3 - RH (1 pcs) |
| 2 x | Ball Link M2 with Ball and Hardware, 10 pcs |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | Z type of cable coupler Ø 1.8 (2 uds) |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 2 x | Liston HAYA 10 x 10 x 1000 mm |
| 2 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 2 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
| 1 x | Aluminium red ball links M3 V1 (10 pcs) |
| 2 x | Ball link duraluminium M3 V1 (10 pcs) |
| 1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
| 2 x | Aluminium blue ball links M3 V1 (10 pcs) |
| 1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | BEC 3A FOXY |
| 1 x | CC 01 |
| 1 x | Ventus 1:4 set of instruments |
| 2 x | TrainerCord (master-learner) |
| 1 x | CC 03 |
| 1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | CC 02 |
| 1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | Adapter lead MPX/EC3 |
| 2 x | Cabel charger transmitter GRAUPNER |
| 2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 2 x | 30 cm BEC cable (female) |
| 2 x | TP/TopFuel - XH 2/3S Adapter |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 3 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 2 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
| 1 x | Field folding model stand |
| 1 x | Angle of incidence meter |
| 1 x | Field folding model stand SebArt |
| 1 x | Propeller balancer |
| 1 x | Truck-trailer for gliders 720 x 239 mm |
| 1 x | Carbon fiber rod 1.5 mm x 2000 mm |
| 1 x | Extension lead 15 cm Multiplex |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | Ancla 16 mm (2 pcs) |
| 2 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | Turnbuckle M2,5x27/43 (2pcs) |
| 1 x | Turnbuckle M1,6x20/30 (2pcs) |
| 1 x | DIVA cabin cruiser |
| 2 x | Threaded coupler M2 (10 uds) |
| 1 x | Balsa panel 3.0x100x1000 mm |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | Threaded coupler M3 (10 uds) |
| 1 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 1 x | Circlick securite |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | JETImodel SINGLE BEC |
| 1 x | Prolonguer for Balancer Thunder Power 6S |
| 1 x | SPS 70V 100/200 A |
| 1 x | Switc electronic 30 Amp |
| 1 x | SWTU2 switch |
| 1 x | SBEC 30 D |
| 1 x | PSC 6 |
| 1 x | SPS Remote switch actuator |
| 1 x | PWC4 wing/fuselage connector for 4 servos |
| 1 x | MPX-Dean "T" Adapter |
| 1 x | Connector Sub-D 2+5 Female |
| 1 x | Propeller balancer |
| 1 x | Male connector for 16 pines AWG |
| 1 x | Female connector JST SH 1.0mm with 10 cm wire |
| 1 x | Aluminium sheet 500x250x0,5mm |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 2 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
| 2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
| 1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | VPP system propeller for AXI VPP motors (spare) |
| 1 x | HBC 10035-3 32-Bit |
| 1 x | ESC ALPHA 60A HV |
| 1 x | CC 11 Conector |
| 1 x | Angle measurer |
 |
| 5,995.05EUR |
