2 x | Jeti Black cap |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
2 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
3 x | Long pinned hinge (12 uds) |
3 x | Nylon hinge 20x20x0,3 (10 pcs) |
2 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Large flex hinge (12 uds) |
2 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
2 x | Nylon hinge 20x15x0,3 (10 pcs) |
2 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
4 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
3 x | 15 mm reinforced hinge |
3 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
2 x | Nylon hinge for flaps 33x9 (2 pcs) |
2 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
4 x | Long pinned hinge (6 uds) |
2 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
2 x | Gates hinge aluminium (1 pcs) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
3 x | 18 mm reinforced hinge |
2 x | Miniature brass strap hinge, 1 m |
2 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
2 x | Micro flex hinge (12 uds) |
4 x | Fast'n EZ-CA-Hinge (12 uds) |
2 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
2 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | One touch canopy lock |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Canopy Latch |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Electric spoiler 250 mm (2 pcs) |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Covered closure or fairings |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Ventus 1:4 set of instruments |
1 x | Extractor piñones 2.3/3.2 mm |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
2 x | Extension 90 cm (Futaba) |
2 x | Extension silicon 35 cm male (Futaba) |
2 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | Cable S.BUS 3 salidas 300 mm |
2 x | Premium servo extension 100cm |
2 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | 200 mm extensión servo HITEC/JR |
1 x | Premium servo extension 25cm |
1 x | Extension 100 cm (Futaba) |
1 x | Prolongador S-Bus JR/JR 10cm |
1 x | Extension silicon 30 cm male (Futaba) |
2 x | Extension 30 cm (Futaba) |
1 x | Cabel "Y" 15 cm |
2 x | Prolongador S-Bus JR/JR 20cm |
1 x | Extension silicon 10 cm (Graupner) |
2 x | Extension silicon 30 cm male (Graupner) |
2 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
4 x | Aluminium wide washer M4 Gold (4 pcs) |
4 x | Pin hinge 39x20 mm (10 uds) |
3 x | Medium pin type hinge (12 uds) |
1 x | Propadapter for motor A50-V3 |
1 x | DUPLEX 2,4GHz MRPM-AC EX |
2 x | Extension silicon 100 cm (Graupner) |
1 x | DUPLEX 2,4EX Stick with 3-Position Switch for Transmitter DC/DS |
1 x | Extension silicon 35 cm (Futaba) |
1 x | Screwdriver for Torx® TX8 |
1 x | Axle for motor A50-L |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
2 x | Servo Dymond D 37 Eco |
1 x | Servoholder Dymond DS 1800 MG Digital (2 pcs) |
1 x | DUPLEX 2,4EX Brackets for Transmitter DC/DS |
1 x | DUPLEX 2.4EX Central Box 210 |
1 x | Battery RX JETI LiIon RB 2600 7.2v |
2 x | Extension silicon 100 cm (Futaba) |
1 x | Premium servo extension 75cm |
1 x | DUPLEX 2.4EX MUI 150 Sensor |
1 x | AddCAP 10AS capacitors |
1 x | DUPLEX 2.4EX Central Box 220 |
1 x | DUPLEX 2.4EX Central Box 320 |
1 x | Extension silicon 75 cm (Futaba) |
1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
2 x | Gear for D 200 BX |
3 x | 50 mm gas motor standoff |
2 x | Small flex hinge (12 uds) |
2 x | Aluminium cap bolt washer M3 green (8 pcs) |
3 x | 10 mm gas motor standoff |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | aluminium servo arm V1-JR 1,0 inch M2 |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
2 x | 40 mm gas motor standoff |
1 x | Small pinned hinge (12 uds) |
2 x | 35 mm gas motor standoff |
3 x | Flap hinge 33x9 mm (6 pcs) |
3 x | 6 mm Quick clamp_S (10 pcs) |
2 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | aluminium servo arm V2-JR 2,0 inch M3 |
2 x | Small pinned hinge (6 uds) |
2 x | Nylon hinge 15x0,3 (10 pcs) |
2 x | 11 mm Rubber pads (14 pcs) |
3 x | Aluminium ignition bad (blue) |
2 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
3 x | 25 mm reinforced hinge |
2 x | 15 mm gas motor standoff |
2 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
3 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Aluminium battery holder red |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
2 x | AL Axle Shaft 4.0x16 mm (2 uds) |
1 x | 15 mm floating pad (30 pcs) |
2 x | 20 mm gas motor standoff |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
2 x | 5 mm gas motor standoff |
2 x | Aluminium wide washer M4 Black (4 pcs) |
3 x | Indoor hinge with servo arm integraded |
1 x | Aluminium wide washer M4 Red (4 pcs) |
2 x | 10 mm Quick clamp_L (6 pcs) |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Round flex hinge (12 uds) |
2 x | Aluminium cap bolt washer M3 black (8 pcs) |
2 x | 10 mm floating pad (72 pcs) |
1 x | A50 Backmountset complete V3/V4 |
1 x | Swing 1000 |
1 x | KOLIBRI 90 LV-I Esc |
1 x | KOBY 90 LV Esc |
1 x | Esc KOSMIK 200+ HV |
1 x | KOLIBRI 140 LV Esc |
1 x | RANGER Jet NAVY 1.854mm combo |
1 x | TURBINATOR 2 BLUE AND YELLOW 1778 mm Combo |
1 x | RANGER Jet Red/Yellow 1.854mm combo |
1 x | Extension silicon 50 cm (Graupner) |
1 x | Extension silicon 10 cm (Futaba) |
1 x | Ball Bearings for motor A60-V2 |
1 x | Bearings for motors hacker A50 |
1 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
1 x | A60 Motor Mount Alu complete set |
1 x | Esc MasterBasic 90 Opto |
1 x | Esc master MEZON 120 Lite |
1 x | PPS-4D Propeller |
1 x | GPS Logger Dymond |
1 x | DYMOND VTX UBS Programming adapter |
1 x | Boomerang ELAN THUNDERBIRD Combo |
1 x | TURBINATOR 2 RED/WHITE 1778 mm Combo |
1 x | RANGER Jet CANADA 1.854mm combo |
1 x | RANGER Jet Red/White 1.854mm combo |
1 x | TURBINATOR 2 ORANGE/SILVER 1778 mm Combo |
1 x | Boomerang SPRINT V2 Red/Yellow |
1 x | Boomerang SPRINT V2 Red/White/Blue |
1 x | Boomerang SPRINT V2 Yellow/Black |
1 x | Propeller MENZ-S 16x8 |
1 x | Propeller MENZ-S 18x8 3-Blades |
1 x | Propeller MENZ-S 17x8 |
1 x | Propeller MENZ-S 19x8 |
2 x | DUPLEX R6 receiver REX Assist |
2 x | DUPLEX 2.4EX Satellite receiver Rsat 2 |
2 x | VARIO module Hott |
1 x | Receiver DUPLEX R9 EX 2.4 GHz |
1 x | Epoxy 40 min (Hardener). 10Kg |
1 x | Epoxy Resin HT 2 + Hardener HT 2, kit/ 296 g |
1 x | SE Ring 300 mm (2 pcs) |
1 x | SE Ring 250 mm (2 pcs) |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Rudder 2_Tray 4.5~5 inch |
2 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
1 x | Antenna Hole Cap V1 (Silver) |
1 x | Floating M4 washer pad (36 pcs) |
1 x | Circlick securite |
1 x | Extension silicon 25 cm (Futaba) |
1 x | Futaba male 40 cm extension |
1 x | Receptor GRAUPNER GR-24 HoTT |
1 x | Receiver GRAUPNER GR-12 HoTT |
1 x | DUPLEX R7 receiver 2,4GHz |
1 x | DUPLEX R7 REX receiver 2,4GHz |
1 x | DUPLEX R6G indoor receiver 2,4GHz |
1 x | DUPLEX R12 EPC receiver 2,4GHz |
1 x | DUPLEX Satellite receiver Rsat 900 |
2 x | Receiver DUPLEX R3L EX 2.4 GHz |
1 x | DUPLEX R7 receiver nano 2,4 GHz |
1 x | DUPLEX RC Droid Box - DC/DS |
1 x | Receiver GRAUPNER GR-16 HoTT |
1 x | Blue aluminium servo arm V3-Hitec 1,0inch M3 |
1 x | Floating M3 washer pad (36 pcs) |
1 x | Cyano INSTA - CURE™ Pocket (18g) |
1 x | Epoxy Resin L + Hardener GL 1 (30 min) |
1 x | Epoxy 5 min. 500 g (Hardener) |
1 x | wire tensioner (silver) |
1 x | SE Ring 400 mm (2 pcs) |
1 x | 25 mm gas motor standoff |
1 x | Transmitter Stick Ends V1 Blue - M3 (2 pcs) |
3 x | 30 mm gas motor standoff |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Motor mount M |
1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
1 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
1 x | Flap hinge (6 pcs) |
1 x | Suction funnel for carburetor 90D-M (red) |
1 x | TX-Tray V1 (L) (Black) |
1 x | Fuel line plugs (Blue) |
1 x | Fuel Fittings-Gold |
1 x | Transmitter Stick Ends V5 Blue - M4 JR/DX7 |
1 x | double Fuel Dot V2 (silver) |
1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
1 x | Receiver DUPLEX REX 3 A20 2.4 GHz |
1 x | DUPLEX R12 receiver REX Assist |
1 x | Satellite receiver DUPLEX Rsat 900 NG MHz |
1 x | Receptor DUPLEX REX R9 Slim |
1 x | DUPLEX R10 receiver REX Assist |
1 x | Receiver DUPLEX REX 3 2.4 GHz |
1 x | DUPLEX R7 REX receiver 2,4GHz A40 |
1 x | DUPLEX R7 receiver REX Assist |
1 x | DUPLEX R6 EX receiver 2,4GHz |
1 x | Receiver DUPLEX R5L EX 2.4 GHz |
1 x | DUPLEX R18 EX 2,4GHz + Rsat2 |
1 x | Deposito SECRAFT V2 1000 ml Gas |
1 x | Double aluminium servo arm V1-Futaba 2,5 inch M3 (red) |
1 x | Fuel dot V3 (Blue) |
1 x | Fuel dot blue |
1 x | Fuel dot V3 (Silver) |
1 x | Blue aluminium servo arm V2-Hitec 1,25 inch M3 |
1 x | Blue aluminium servo arm V3-Hitec 1,5inch M3 |
2 x | FPV Station for SE TX-Tray V1 |
1 x | Blue aluminium servo arm V2-Hitec 1,75" inch M3 |
1 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
1 x | Blocking screws M6 gas engine |
1 x | Blue aluminium servo arm V1-Hitec 1,5" inch M3 |
1 x | Extender tip (6 pcs) |
1 x | Epoxy SLOW-CURE™ 30 min (130g) |
1 x | Catalyst RESOLTECH 3357-T (0.45 Kg) Suitable for adhesive 3350/1 |
1 x | Epoxy SLOW-CURE™ 30 min (260g) |
1 x | Catalyst INSTA - SET™ (60g) |
1 x | Cyano INSTA - CURE™ (12g) |
1 x | Thread locker IC-Loc™ red "high" 10 ml |
1 x | Epoxy MID-CURE™ 15 min (130g) |
1 x | Mixing tube for double syringes and cartridges (MR 1:1 and 2:1) |
1 x | Epoxy Resin L + Hardener LT kit/ 895g |
1 x | Epoxy Casting Resin + Hardener "water-clear" (300 min) |
1 x | wire tensioner (blue) |
1 x | Wire easy tensioner (red) |
1 x | Propeller POWER-PROP 7x7 |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | SE Ring 450 mm (2 pcs) |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | Transmitter Stick Ends V1 Red - M3 (2 pcs) |
1 x | Wheel 38 mm V2 |
1 x | Battery bed V2_S (black) |
1 x | SE Ring HACKER 300 mm (2 pcs) |
1 x | wire tensioner (red) |
1 x | Motor Mount for Multiplex FunJet |
1 x | Battery bed V2_M (black) |
1 x | wire tensioner (black) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Receiver bed (Blue) |
1 x | M3-M4 rubber washer (8 pcs) |
|
31,702.17EUR |