1 x | UBEC 6A KAVAN |
3 x | 30 cm BEC cable (female) |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
2 x | Dean "T" - Futaba Adapter |
3 x | Connector CAN 15 |
2 x | Connector Sub-D 2+5 Female |
2 x | BEC 3A FOXY |
4 x | CC 02 |
2 x | CM-3 |
2 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
2 x | 3 LiPo XH>EH adapter |
2 x | Cabel charger transmitter GRAUPNER |
3 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Cabling for Fox MDM1 wings |
2 x | DPS Switch JR/JR |
4 x | Copper lacquer wire Ø0,2 mm (5 m) |
2 x | 4 LiPo XH>EH adapter |
3 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
2 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
3 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
3 x | CC 03 |
3 x | Circlick securite |
2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
2 x | CC 05 |
2 x | Double conector with JR adapter and 200 mm extension |
1 x | Connector Sub-D 2+5 Male |
2 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
1 x | Carbon fiber rod 10 mm x 1000 mm |
2 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | USB interface ALTIS |
2 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | Copier 2x20 cm pcs |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Starter Sullivan-STAR 601 |
1 x | Starter EM Gear Power 250 |
1 x | 1,5x50 mm allen screwdriver |
1 x | Adapter lead MPX/EC3 |
2 x | Interruptor RX/Batterie |
2 x | CC 01 |
1 x | Starter EM Gear Power 80 |
1 x | Hot Glue Stick RED |
1 x | |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Carbon fiber rod 0.8 mmx1000 mm |
1 x | Carbon fiber rod 16 mm x 1000 mm |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | Prolonguer for Balancer Thunder Power 6S |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Hexagonal ball head 2.0 x 50 mm |
2 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | Hot Glue Stick BLACK |
1 x | Screwdriver for Hexagon 1,5mm |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Carbon fiber rod 1.0 mm x 1000 mm |
2 x | Female connector for 6 pines AWG |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Cut tube |
2 x | Z Bender - S Type Tool |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | Ball Link Plier |
1 x | 30 cm BEC cable (male) |
1 x | Dust collector for mould cleaning |
1 x | Vacuum pump P1-N |
1 x | PSC 6 |
1 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Digital precision scale up to 2000 g |
1 x | 3,0x60 mm allen screwdriver |
2 x | 5 LiPo XH>EH adapter |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
2 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Crimping tool |
1 x | 2 LiPo XH>EH adapter |
1 x | Screwdriver for Torx® TX6 |
1 x | Vacuum pump 12 CFM |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Hot Glue Stick GREEN |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Copier 5x20 cm pcs |
2 x | Male Prolonger TP 4/5S |
3 x | Male connector JST SH 1.0mm with 10 cm wire |
3 x | Female connector JST SH 1.0mm with 10 cm wire |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | Cabel "Y" 30 cm (graupner) |
2 x | Cabel "Y" 30 cm (Futaba) |
1 x | Extension silicon 30 cm female (Futaba) |
1 x | Extension silicon 10 cm (Graupner) |
1 x | Extension lead 15 cm Multiplex |
1 x | Futaba male 40 cm extension |
2 x | Cable S.BUS 3 salidas 100 mm |
1 x | Extension silicon 100 cm (Graupner) |
1 x | Extension silicon 50 cm (Futaba) |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Allen wheel collar M4x4 |
1 x | 11 mm Rubber pads (14 pcs) |
1 x | 45 mm rods + T patellas set for direction control |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Clip fixing for wing (2 pcs) |
1 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | ABS I Strip 20x10x1000 mm |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | 80 mm rods set for direction control |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | Allen wheel collar M3x3 |
1 x | Round Rod 5,0x1000 mm |
1 x | EWC6 40 cm wing connector |
2 x | Extension 2/3 lipos JST/C |
2 x | Male connector for 6 pines AWG |
1 x | Extension 5 lipos JST/C |
1 x | JETImodel SINGLE BEC |
1 x | EWC3 40 cm wing connector |
2 x | Extension 6 lipos XH > EH |
1 x | EWC3 100 cm wing connector |
1 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
1 x | Magnetic Interruptor MULTIPLEX |
1 x | Male connector for 20 pines AWG |
1 x | Electronic switch JETI SP06 Opto |
1 x | JETImodel DPS 40 |
1 x | MAX BEC |
1 x | Extension 2/3 lipos JST - JST/C |
1 x | Interruptor SAFET-SWITCH 12HV Twinbatt |
2 x | Female connector for 12 pines AWG |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | Vasa model Catapult |
1 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | Fiberglass heat shield Ø 6 mm 1000 mm |
1 x | 100m servo "Premium" wire (white/red/blue) |
1 x | Oracover Azul 2 m |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | 4,8x1000 mm 2:1 black termoretract tube |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
2 x | 2,0x50 mm allen screwdriver |
1 x | |
1 x | Laminating brush 10 mm, pack/ 50 pcs |
1 x | Goma arrancador Ø36 mm x 30 mm |
1 x | Cotton Flocks, bag/ 500 g |
1 x | Schul-Malpinsel Gr.5 |
1 x | Kwik link unmount tool |
1 x | Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
2 x | |
1 x | Tachometer Hyperion Multi-pala |
2 x | USB HLS prog. interface |
1 x | Z Bender - S Type Tool |
2 x | SPARK Switch 7.4v |
1 x | Digital scale up to 40 kg |
1 x | Support pumb/filter Xicoy X45 |
1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
1 x | Support XT60 conector (2 pcs) |
1 x | Support Flush MPX Conector (6 pcs) |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
1 x | Extension 5 lipos JST/C - JST |
1 x | Opto Gas Engine Kill Switch |
1 x | Male connector for 16 pines AWG |
1 x | MPX-Dean "T" Adapter |
1 x | Soporte grifo FESTO (2 pcs) |
1 x | Multi-adapter balancer JST/C - TP |
1 x | PowerBox SparkSwitch RS |
1 x | Support Filtro FESTO |
1 x | FEMA DEFLECTOR LEVER FOR WHEEL BRAKE, |
1 x | JEEMO Kit ARF Basic (2 color) - XTRALIGHT |
1 x | Interruptor SPS 70v 60/120A |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | Switc electronic 30 Amp |
1 x | Support Pitot JETI |
1 x | Mini DART 2 F3K carbon light 1m Green |
1 x | Pasacables rectangular 40x15 mm (4 pcs) |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | SBEC 40 |
1 x | FX three-position switched channel, long |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
1 x | 460 mm EPP Floats |
1 x | Tren de cola carbono 50-70cc |
1 x | Fiberglass landing gear for 140-160 |
1 x | Tap FESTO 6-6 mm |
1 x | Y-Hose connector 3-3-3 mm |
1 x | Landing gear strap medium (4 uds) |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Z-shaped servo mount |
1 x | Mini VISION "spread tow" CFK |
1 x | Electric spoiler 185 mm (2 pcs) |
1 x | Servo arm with 5 mm hole to FEMA 9810A |
1 x | T-Hose connector 4-4-4mm |
1 x | Manometer 4 mm |
1 x | 160 mm carbon undercarriage (2pcs) |
1 x | Premium servo extension 75cm |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | Extension silicon 30 cm male (Graupner) |
1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
1 x | Extension 7.5 cm |
1 x | Futaba Female 40 cm extension |
1 x | DPSI Ampere battery backer |
|
8,942.69EUR |