1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Buy Perforated film 100 cm / 10 m |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | Buy Perforated film 100 cm / 20 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
2 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
2 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Long pinned hinge (12 uds) |
2 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Gates hinge |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | 25 mm reinforced hinge |
2 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Small pinned hinge (12 uds) |
1 x | 15 mm reinforced hinge |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
2 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Large flex hinge (12 uds) |
1 x | 18 mm reinforced hinge |
1 x | Para-RC Trike "RC-Bullix" |
1 x | Paramotor BackPack XXS 2 |
1 x | Para-RC "RC-Evo-Cross" Rescue |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | Profile ABS Square 3 x 1000 mm |
1 x | ABS angle 1.5x1.5x1000 mm |
1 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | L-Connector 1.0 mm x 1000 mm |
1 x | Cable Cargador FUTABA |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Indoor hinge with servo arm integraded |
1 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | Support conector MPX (6 pcs) |
1 x | Micro flex hinge (12 uds) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Gates hinge aluminium (1 pcs) |
1 x | Landing gear retract neumatic (Jet Legend) |
1 x | Shaft sleeve LAMA |
1 x | TMM 2512-3S heli |
2 x | Mini-Pix Esc 15 Amp |
1 x | 9x4.7 * 22x12 carbon propeller |
1 x | Carbon blade 230 mm |
1 x | Metalic nose for PROJETI |
1 x | Crystal Universal RX 35.050 Ch 65 |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Electric starter suitable for the DLE111, DLE120 and DLE85. |
1 x | Ball link Aluminio M3 (2 pcs) |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Gates hinge 30x16 mm (2 pcs) |
2 x | 20cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | Motor NGH GT-9 V2 |
1 x | Dia. 20x15 mm teflon tube for escape |
1 x | Piston ring for motor 58/116 cc |
1 x | D.A. Fueling Valve |
1 x | 7-Cylinder 35cc 4-Stroke Glow Radial Engine |
1 x | Ignition RM-25V |
1 x | Motor Saito FG-60 R3, 60 cc |
1 x | MVVS presuritation conection 26-175 cc |
1 x | Motor Saito FG-90 R3, 90 cc |
1 x | 10cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | Solarfilm Lite blue transp. 5m |
1 x | PVC yellow transparent battery termo-retract 69 mm (10 m) |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Cierre cabina aluminio Ø4, I=10 mm |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | Tube Pitot to PIXHAWK |
1 x | Hovercraft sailcloth |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Straightened threaded rod M2-1m |
1 x | 40 mm gas motor standoff |
2 x | Head Gasket 30cc (3 pcs) |
1 x | Aceite DELUXE turbine Jet Oil 1 litro |
1 x | Cotter MVVS 45/50/58 cc |
1 x | Silencer Ring 7-35 |
1 x | Cylinder-piston Assembly 30cc |
1 x | Dia. 20x10 mm teflon tube for escape |
1 x | Motor Saito FG-36, 36 cc |
1 x | Castrol Oil A747 1l |
1 x | Motor NGH GF 150 R5 |
1 x | Valvoline SynPower 2T, 1 Litre |
1 x | Motor DA 50-R |
1 x | 50 mm gas motor standoff |
1 x | Motor Saito FG-100 TS, 100 cc |
1 x | O-Ring SAITO FG-60 R3 |
1 x | Air Intake manifold 90° - Large |
1 x | Captador RCEXL para DA |
1 x | Profile ABS half cane 4x1000 mm |
1 x | Profile ABS half cane 5.0x1000 mm |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | 4 mm Prop Adapter CN-Spinner |
1 x | La Capitania di Venetia accesories |
1 x | 3.2 mm Prop Adapter M6 |
1 x | 4 mm Prop Adapter M8 |
1 x | Oratex Red Fokker 10 m |
1 x | Radial mount for electric 2.5-5.6 |
1 x | Motor A60-5XS V4 28-pole kv420 |
1 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
1 x | Motor MVVS 2.0/1120 |
1 x | A30-M/L/XL Backmountset complete |
1 x | Motor B20-10 L + 4:1 gearbox |
1 x | A50 Backmountset complete V3/V4 |
2 x | Canopy Latch |
1 x | Program card KAVAN PRO |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | 18m Fitting barb |
1 x | Servo FUTABA S 3072 HV S-Bus |
1 x | 200 mm extensión servo HITEC/JR |
1 x | Two-function control switch + button by FUTABA |
1 x | Tren de cola carbono 50-70cc |
1 x | 100x50 mm SLH KOVO wheel |
1 x | Motor HP 220/30/A3 P4 5:1 |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | EXTREME FLIGHT RED MAGNETIC ROUND FILLER PLUG |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Tip wing protector 28x10x12 (2 pcs) |
2 x | 38x4,5 mm wires output (2 pcs) |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Lead with adhesive (2 pcs) |
1 x | Allen wheel collar M4x4 |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Motor ROTO-85 FS NG 4T 2 cylinder Boxer |
1 x | Pendulun 27g to tank |
1 x | COMFORT MOUNT ø 60mm |
1 x | Carburator joints for SAITO FA80/80GK/72/72GK |
1 x | Charger LiPo Charger4 |
1 x | 1/6 Pilot "Buddy" |
1 x | 1/6 Pilot "Garry" |
1 x | 1/10 Pilot "Jimmy" |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Tube holder |
1 x | 1/4 Pilot "Heidi" |
1 x | USB Interface REVOLECTRIX for CellPRO 10s |
1 x | 22m Fitting barb |
|
17,040.36EUR |