| 1 x | Cono hélice fija 60 mm diámetro / eje 5,0 mm |
| 1 x | Cono hélice fija 42 mm diámetro / eje 5,0 mm |
| 1 x | Cono plástico negro hélice fija 50 mm diámetro |
| 1 x | Cono plástico rojo hélice fija 36 mm diámetro |
| 1 x | Cono plástico blanco hélice fija 30 mm diámetro |
| 1 x | Cono plástico blanco hélice fija 42 mm diámetro |
| 1 x | Cono plástico negro hélice fija 36 mm diámetro |
| 1 x | Cono plástico blanco hélice fija 36 mm diámetro |
| 2 x | Cono plástico negro hélice fija 30 mm diámetro |
| 1 x | Cono plástico blanco hélice fija 40 mm diámetro |
| 1 x | Bascula precision 0.1-2000 g |
| 1 x | Tijeras curvas 16cm - GFK/CFK/Aramid |
| 1 x | Set Perma-Grit "Fine" 7 piezas |
| 1 x | Destornillador allen 2,5x60 mm molibdeno |
| 3 x | Acumulador polvo para limpieza moldes |
| 1 x | Bascula precisión 0.1- 600 g |
| 2 x | Medidor digital de peso, equilibrio y angulos BASIC |
| 2 x | Lima fina PERMAGRIT para Dremel |
| 3 x | Bascular < 40 Kg |
| 1 x | Destornillador allen 3,0x60 mm molibdeno |
| 1 x | Fresa corte diamante Ø 1.4mm (bola) |
| 1 x | Alicate para "Ball-Link" |
| 1 x | Soporte lija 25 mm |
| 2 x | Corta tubos aire |
| 1 x | Destornillador allen 2,0x50 mm molibdeno |
| 1 x | Pasta soldar 100g |
| 1 x | Tijera electrica |
| 1 x | Ferrita 17x10x6.5 mm |
| 3 x | Modulo PPM Encoder |
| 1 x | Varilla carbono 14 mmx1000 mm |
| 1 x | Fibra carbono tela 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | Cinta fibra carbono 25 mm 3k 125 g/m2 x 50m |
| 1 x | Film perforado 145 cm / 50 m |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 2 m |
| 1 x | Manta bolsa de vacio 300 gr/m2 Bobina 1m |
| 1 x | Varilla carbono 7.0 mmx1000 mm |
| 1 x | Plancha aluminio 500x250x0.5 mm |
| 2 x | ARAMID panel nido de abeja 1300x2600x2 mm |
| 3 x | Varilla carbono plana 3.0 x 1.0 x 1000 mm |
| 2 x | Varilla carbono plana 1000x3.0x0.5 mm |
| 2 x | Varilla carbono 1.5 mm x 1000 mm |
| 1 x | Varilla carbono 0.8 mmx1000 mm |
| 1 x | Varilla carbono 12 mm x 1000 mm |
| 1 x | Liston de BALSA 6,0x6,0x1000 mm |
| 2 x | Tapaporos 1000 ml (DOPE) |
| 1 x | Liston de BALSA 2,0x10,0x1000 mm |
| 1 x | Listón de BALSA 3,0x5,0x1000 mm |
| 3 x | Plancha de balsa 8,0x100x1000 mm |
| 2 x | Cera desmoldeante 250ml |
| 1 x | Pistola para botes de pintura |
| 1 x | Plasti Dip Liquid Tape 429 ml negro |
| 1 x | Listón de BALSA 2,0x2,0x1000 mm |
| 1 x | Listón triangular de BALSA 15x15x1000 mm |
| 2 x | Plancha contrachapado "Economy" 600x300x6,0 mm |
| 1 x | Listón de BALSA 3,0x3,0x1000 mm |
| 2 x | Plancha de balsa 2,0x100x1000 mm |
| 2 x | Listón triangular de BALSA 6x6x1000 mm |
| 1 x | Plancha contrachapado ABEDUL 600x300x1,0 mm |
| 1 x | Plancha contrachapado Abedul 600x300x5,0 mm |
| 3 x | Plancha contrachapado Abedul 600x300x0,8 mm |
| 1 x | Disolvente Plasti Dip 1000 ml |
| 1 x | Motor A2212/13T |
| 1 x | Cable "Y" equilibrador 7S, 2x JST-XH / 1x JST-EH |
| 1 x | Ball link Aluminio M3 (2 pcs) |
| 1 x | Perfil de ABS de media caña 6,0x1000 mm |
| 1 x | Perfil de ABS de media caña 2,0x1000 mm |
| 1 x | Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC |
| 2 x | Tornillo Servos M2x9/16 (4 pcs) |
| 1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
| 3 x | Ferrita 14x8x5.5 mm |
| 1 x | Tijera curva PREMIUM 16 cm |
| 1 x | Crimpadora |
| 1 x | Copiador 5 unidades de 20 cm |
| 1 x | Ferrita con funda |
| 1 x | Cono aluminio 34 mm / 4 mm helice plegable |
| 1 x | Tijera Aramid 21 cm/8" PROTON |
| 1 x | Alicate para "Ball-Link" |
| 1 x | Banda lijado g. 120 para BSL 220/E (5 pcs) |
| 1 x | Banda lijado g. 180 para BSL 220/E (5 pcs) |
| 1 x | Barra pegamento caliente Rojo |
| 1 x | Fibra carbono tela 160g/m2 127 cm x 10 m |
| 2 x | Varilla carbono 6.0 mmx1000 mm |
| 1 x | Cinta de sellado al vacío, 2,5 x 12 mm (hasta 140 ° C) 15 m |
| 1 x | Cinta fibra de vidrio 49 g/m2 5cm x 100m (plain weave) |
| 1 x | Cinta fibra de vidrio 225g / m² (Silane, liso) 40 mm, 50m |
| 1 x | Varilla carbono 10 mm x 1000 mm |
| 2 x | Varilla carbono plana 1000 x 5.0 x 1.0 mm |
| 1 x | Cinta Roving carbono 20m |
| 1 x | Cinta fibra de vidrio 130 g / m² (Silane, liso) 25 mm, 50m |
| 2 x | Varilla carbono 1.5 mm x 2000 mm |
| 1 x | Varilla carbono 8.0 mmx1000 mm |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | Bolsa vacio 1200 mm x 50 m |
| 1 x | Cono plástico blanco hélice fija 42 mm diámetro |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 3 m |
| 1 x | AIREX® M060 lámina (amarilla) 1200x550x1,2 mm (5 pcs) |
| 1 x | Plancha contrachapado Abedul 600x300x4,0 mm |
| 2 x | Spray YELLOW Inca Lexan 150ml |
| 1 x | Servo GO-1073MGW 32 kg.cm 0.135s/60º |
| 1 x | Varilla carbono 0.5 mmx1000 mm |
| 1 x | Pasta universal color blanco 50 g |
| 1 x | Servo GO-1053 MG 20.0kg |
| 1 x | Tapa de servo estándar 90x60 mm |
| 1 x | Plancha de balsa 3,0x100x1000 mm |
| 1 x | Servo FUTABA S 3072 HV S-Bus |
| 2 x | Plancha contrachapado Abedul 1520x750x3,0 mm |
| 1 x | Liston de BALSA 8,0x8,0x1000 mm |
| 1 x | Plancha contrachapado Abedul 1520x750x4,0 mm |
| 1 x | Plancha de limoncillo 600x300x3.0 mm |
| 1 x | Disolvente barniz tensor 500 ml |
| 1 x | Plancha contrachapado Abedul 600x300x0,8 mm |
| 1 x | Plancha de balsa 2,5x100x1000 mm |
| 1 x | Bancada servo ala 11 mm |
| 1 x | Relleno balsa KAVAN 200ml - color balsa |
| 1 x | Plancha contrachapado Abedul 600x300x6,0 mm |
| 1 x | Plancha de balsa 4,0x100x1000 mm |
| 1 x | Servo FUTABA S 3071 HV S-Bus |
| 1 x | Varilla ABS 2,5x1000 mm |
| 1 x | Liston ABS 1,0x3,0x1000 mm |
| 2 x | Liston ABS 1,5x8,0x1000 mm |
| 2 x | Varilla ABS 1,25x1000 mm |
| 2 x | Varilla ABS 6,0x1000 mm |
| 1 x | Liston ABS 1,0x2,0x1000 mm |
| 1 x | Liston ABS H 2,0x2,0x330 mm |
| 1 x | Liston ABS 2.0x8.0x1000 mm |
| 1 x | Liston ABS I 20x10x1000 mm |
| 1 x | Varilla acero roscada M3 -1m |
| 1 x | Varilla acero Ø 5,0 mm x 1000 mm |
| 1 x | Varilla latón hexagonal Ø 3 mm x 1000 mm |
| 1 x | Servo FUTABA SBL 471 SV |
| 1 x | Varilla carbono 2.0 mmx1000 mm |
| 1 x | Varilla carbono 16 mm x 1000 mm |
| 1 x | Plancha de balsa 6,0x100x1000 mm |
| 1 x | Ahesivo en spray AEROFIX 2 |
| 1 x | Plancha de balsa 1,0x100x1000 mm |
| 1 x | Tapa de servo micro-mini 57 mm |
| 1 x | Varilla carbono 5.0 mmx1000 mm |
| 1 x | Servo GO-1013 MG 3.8kg |
| 1 x | Plancha contrachapado ABEDUL 600 x 300 x 2,0 mm |
| 1 x | Caja servo FUTABA S9650/9670SV |
| 1 x | Servo TOPMODEL STANDARD S3217 |
| 1 x | Listón de BALSA 4,0x4,0x1000 mm |
| 1 x | Plancha contrachapado Abedul 600x300x1,5 mm |
| 1 x | Pintura GHT Lexan negro 150 ml |
| 1 x | Pasta universal color Blanco (RAL 9003) 1 Kg |
| 1 x | Varilla carbono plana 1000x6.0x0.8 mm |
| 1 x | Plancha contrachapado Abedul 600x300x4,0 mm |
| 1 x | Programador FUTABA USB CIU-3 |
| 1 x | Varilla carbono 4.0 mmx1000 mm |
| 1 x | Servo TOPMODEL S7520 MG |
| 1 x | Tapa de servo micro-mini 50x45 mm |
| 1 x | Inversor de servo |
| 1 x | Brazo servo FUTABA long (8 pcs) DUBRO |
| 1 x | Varilla carbono 20 mmx1000 mm |
| 1 x | Servo GO-12S69MG 26kg.cm 0.10s/60º |
| 1 x | Conector universal carga chispometro |
| 1 x | Chispometro glow 1.3 Ah |
| 1 x | Brazo servo aluminio V2-Futaba 1,75" M3 rojo |
| 1 x | Servo SAVOX SB-2272 SG Highvoltage brushless (Rotor de cola) |
| 1 x | Varilla acero Ø 0,5 mm x 1000 mm |
| 1 x | Varilla acero Ø 7,0 mm x 1000 mm |
| 1 x | Varilla latón hexagonal Ø 5 mm x 1000 mm |
| 1 x | Conector MR-60 (pareja) |
| 1 x | Paracaidas XTRALITE S |
| 1 x | Cono blanco 38-45 mm (recambio) |
| 2 x | Set gomas XS cono RFM (4 pcs) |
| 1 x | Helice Carbono 16x17 |
| 1 x | Helice Carbono 23x12 |
| 1 x | Helice Carbono 18x17 |
| 1 x | Arrancador 12v (Max 180 and 30ccm) |
| 2 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
| 1 x | Servo SAVOX SV-1260 MG |
| 1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
| 1 x | Mango para lima PERMAGRIT |
| 1 x | Fresa corte diamante Ø 2.3mm (bola) |
| 1 x | Helice RF Carbono 16x8,5 S |
| 1 x | Helice RF Carbono 10x17 |
| 1 x | Helice Carbono 16x16 Ancha |
| 1 x | Helice Carbono 11x8 |
| 1 x | Helice Carbono 17x18 |
| 1 x | Arrancador Sullivan-STAR 601 |
| 1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
| 1 x | Rueda de acero Proxxon/Dremmel 2,35 mm |
| 1 x | Ferrita 27x14x7 mm |
| 1 x | Filtro para bomba vacio |
| 1 x | Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs) |
| 1 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
| 1 x | Bancada servo SAVOX SV-1260MG |
| 1 x | Servo SAVOX SA-1256 TG |
| 1 x | Servo SAVOX SV-1273 TG |
| 1 x | Cono carbono autovent. hélice pleg. 30 mm/eje 5,0 mm/0º |
| 1 x | Cono carbono autovent. hélice pleg. 38 mm/eje 6,0 mm/5º |
| 1 x | Copiador 2 unidades de 20 cm |
| 1 x | Brazo servo Savox SH-82 aluminio |
| 1 x | Cono carbono autovent. hélice pleg. 36 mm/eje 6,0 mm/0º |
| 1 x | Cono carbono autoventilado hélice pleg. 36 mm / eje 6,0 mm |
| 1 x | Cono carbono autovent. hélice pleg. 42 mm/eje 6,0 mm/0º |
| 1 x | Plancha ABS 500 x 400 x 0,5 mm (blanca) |
| 1 x | Plancha estireno 320x120x1.0 mm |
| 1 x | Servo GO-1017MG 4.5 kg.cm 0.10s/60º |
| 1 x | Liston ABS I 2,5x1,25x330 mm |
| 1 x | Refueling Cap V3 Black |
| 1 x | Oracover Gris claro 2m |
 |
| 7,738.05EUR |
