| 2 x | Ferrita 14x8x5.5 mm |
| 2 x | Ferrita con funda |
| 2 x | Ferrita 27x14x7 mm |
| 3 x | Ferrita 17x10x6.5 mm |
| 1 x | Red smoke canister 100 g |
| 2 x | Mixers smoke bombs AX-60 (5 pcs) |
| 1 x | Parachute expulsion foam |
| 1 x | White smoke canister 65 g |
| 1 x | Yellow smoke canister 140 g |
| 1 x | Smoke set "Glider" |
| 2 x | Initior Receiver FRX2 Wireless |
| 2 x | "S" set for boats |
| 1 x | Smoke set "M" |
| 2 x | Red smoke canister 65 g |
| 2 x | White smoke bombs AX-9 (10 pcs) |
| 1 x | White smoke bombs AX-60 (5 pcs) |
| 1 x | PCARD Wireless System |
| 2 x | Blue smoke canister 100 g |
| 2 x | Black smoke bombs AX-60 (5 pcs) |
| 1 x | B4-0 rocket charges (6 pcs) |
| 1 x | Yellow smoke canister 100 g |
| 1 x | Ventral support for AX-18/AX-60 |
| 1 x | AX-60 starters (5 pcs) |
| 1 x | 3l Smoke oil |
| 1 x | Parachutist |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | ORACOVER Fluor red (2 m) |
| 1 x | Oracover Brown 2 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | 1/12 Pilot "Tom" |
| 1 x | SE Ring 480 mm (2 pcs) |
| 1 x | Cinta Goldfix 1m |
| 2 x | Circlick securite |
| 2 x | Large flex hinge (12 uds) |
| 1 x | Small pinned hinge (12 uds) |
| 1 x | Micro flex hinge (12 uds) |
| 2 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
| 2 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | Small pinned hinge (6 uds) |
| 1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
| 1 x | Pin hinge 34x16 mm (10 uds) |
| 2 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 1 x | Medium pin type hinge (12 uds) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | ABS 500 x 400 x 1 mm (white) |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | Buy Perforated film 100 cm / 20 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | ABS 500 x 400 x 1,5 mm (white) |
| 1 x | ABS 500 x 400 x 2,0 mm (white) |
| 1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 2 x | Nylon threaded block M5 (2 uds) |
| 1 x | Landing gear clamp for Ø 3 mm (4 uds) |
| 1 x | Landing gear axle Ø 4 mm (2 uds) |
| 1 x | Faucet FESTO |
| 1 x | Long pinned hinge (12 uds) |
| 2 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
| 1 x | 69x25 mm (2.75") axle Ø4 mm aluminium core wheel |
| 1 x | 45x9 mm foam special light KOVO wheel with radius (2 pcs) |
| 1 x | 64x20 mm (2.5") Type jets aluminium core wheel |
| 1 x | 110x55 mm SLH KOVO wheel |
| 1 x | 152x46 Ø6.0 mm aluminium core wheel |
| 1 x | 32x9 mm foam standar KOVO wheel (2 pcs) |
| 1 x | 76x23 Ø3.5 mm aluminium core wheel |
| 1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | Dual Sequencer Gear and Canopy |
| 1 x | Dust collector for mould cleaning |
| 1 x | Ball Link Plier |
| 1 x | Digital precision scale up to 2000 g |
| 1 x | Hot Glue Stick BLACK |
| 1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
| 1 x | Starter 12v (Max 180 and 30ccm) |
| 1 x | Hot Glue Stick GREEN |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Squared carbon wing joinner 5x5x220 mm |
| 1 x | Carbon plate 350x150x1.0 mm |
| 1 x | Fiberglass motor-holder for electric motors |
| 1 x | Motor mount for 1 m models |
| 1 x | Central support Speed 600 |
| 1 x | Wheel cover holder Ø 5 mm (2 uds) |
| 1 x | T-Hose connector 3-3-3 mm |
| 1 x | Wheel cover holder Ø 3 mm (2 uds) |
| 1 x | Quick hose connector 6-6 mm |
| 1 x | Racor 3/3 mm |
| 1 x | Quick hose connector 3-3 mm |
| 1 x | Y-Hose connector 4-4-4mm |
| 1 x | Wheel collar 4 mm Ø (4 uds) |
| 1 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
| 1 x | Red smoke canister 140 g |
| 1 x | Propeller Pleg CAM Carbon 14x8 |
| 1 x | Propeller Pleg CAM Carbon 13x11 |
| 1 x | Electric rocket starters (6 pcs) |
| 1 x | Propeller Pleg CAM Carbon 11x10 |
| 1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
| 1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | Robart Door Hinge (Pk2) |
| 1 x | Pin hinge 26x11 mm (10 uds) |
| 1 x | Glass fabric 49 g/m² (1,27 x 10 m) |
| 1 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
| 1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 50m |
| 1 x | Peel ply 100 g/m² (plain weave) 50 cm x 2m |
| 1 x | Glass fabric 49 g/m² (1,27 x 20 m) |
| 1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m |
| 1 x | Peel ply 64 g/m² (plain weave) 150 cm x 20m |
| 1 x | PET film Mylar® A 350, 50 cm, roll/ 5 m |
| 1 x | Glass fibre braided sleeve (45mm) roll 10m |
| 1 x | Glass fibre braided sleeve (45mm) roll 20m |
| 1 x | Glass fibre sleeve Ø 20 mm |
| 1 x | Indoor motor holder |
| 1 x | Frontal support Speed 280 |
| 1 x | Size "M" motor holder for class 400 |
| 1 x | Motor mount for 1200 mm models |
| 1 x | Metalic motor holder for class 550-600 |
| 1 x | Central support Speed 280 |
| 1 x | A50 Motor Mount Alu complete set |
| 1 x | Frontal support Speed 600 |
| 1 x | Frontal support Speed 400/480 |
| 1 x | |
| 1 x | Size "M" motor holder for class 400 |
| 1 x | Cooler motor type 400 |
| 1 x | Z-shaped servo mount |
| 1 x | Racor 2/3 mm |
| 1 x | T-Hose connector 2-2-2 mm |
| 1 x | Wheel collar 3 mm Ø (4 uds) |
| 1 x | Tap FESTO 6-6 mm |
| 1 x | Y-Hose connector 4mm |
| 1 x | Servo arm with 6 mm hole to FEMA 9800A |
| 1 x | T-Hose connector 4-4-4mm |
| 1 x | Bungee HLG Premium |
| 1 x | Tap FESTO 4-4 mm |
| 1 x | Y-Hose connector 2-2-2 mm |
| 1 x | Servo arm with 4 mm hole to FEMA 9810A |
| 1 x | Racor 4/3 mm |
| 1 x | Wheel cover holder Ø 4 mm (2 uds) |
| 1 x | KIRA 400-34 |
| 1 x | KIRA 600-16 |
| 1 x | JIVE 120+HV Esc |
| 1 x | Esc KOSMIK 210 HV-I COOL |
| 1 x | KIRA 500-36 6,7:1 |
| 2 x | Female connector for 6 pines AWG |
| 2 x | Male connector JST SH 1.0mm with 10 cm wire |
| 2 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 2 x | Extension 5 lipos JST/C |
| 2 x | SWTU2 switch |
| 2 x | Pins M connect Multipin connectors AWG 20-24 |
| 2 x | TP/TopFuel - XH 2/3S Adapter |
| 2 x | CC 01 |
| 1 x | SPS 70V 100/200 A |
| 1 x | Gates hinge 30x16 mm (2 pcs) |
| 1 x | PVC grid diagonal 290x185x0.32 mm |
| 1 x | Extension 5 lipos JST - JST/C |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
| 1 x | Opto Gas Engine Kill Switch |
| 1 x | Female connector JST SH 1.0mm with 10 cm wire |
| 1 x | MAX BEC 2D plus EX |
| 1 x | MPS Gas-Cap-Powerswitch |
| 1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
| 2 x | Extension 2/3 lipos JST/C |
| 1 x | SBEC 40 |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | CC 03 |
| 1 x | Male Prolonger TP 4/5S |
| 1 x | MAX BEC 2 |
| 1 x | Opto Gas Engine Kill Switch |
| 1 x | JETImodel DPS 40 |
| 1 x | 30 cm BEC cable (female) |
| 1 x | CC 05 |
| 1 x | Selfstart electronic switch |
| 1 x | Connector Sub-D 2+5 Female |
| 1 x | Interruptor SPS 70v 60/120A |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | Electronic switch JETI SP6 0-15v/6A |
| 1 x | Electronic switch JETI SP06 Opto |
| 1 x | CC 02 |
| 1 x | Long Switch On/Off micro |
| 1 x | PSC 5 |
| 1 x | Prolonguer for Balancer Thunder Power 6S |
 |
| 8,820.50EUR |
