2 x | Landing gear axle 4x21 4 mm (2 uds) |
2 x | AL Axle Shaft 4.0x16 mm (2 uds) |
3 x | Landing gear axle Ø 4 mm (2 uds) |
2 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
2 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | USB HLS prog. interface |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | ABS tube 8.0x7.0x1000 mm |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm) |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | ABS tube 4.0x2.0x1000 mm |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | ABS tube 6.0x5.0x1000 mm |
2 x | 3 LiPo XH>EH adapter |
2 x | ABS tube 5.0x4.0x156 mm |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | CC 01 |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | 30 cm BEC cable (male) |
1 x | Dean "T" - Futaba Adapter |
1 x | 30 cm BEC cable (female) |
2 x | Red copper lacquer wire Ø0,2 mm (5 m) |
2 x | TrainerCord (master-learner) |
2 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | ABS tube 5.0x3.0x1000 mm |
2 x | CC 05 |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
2 x | Landing gear axle Ø 8 mm (2 uds) |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
2 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
3 x | TP/TopFuel - XH 2/3S Adapter |
3 x | 4 LiPo XH>EH adapter |
1 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
2 x | ABS tube 10.0x8.0x1000 mm |
3 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | ABS tube 9.0x7.0x1000 mm |
2 x | Ferrita con funda |
2 x | Ferrita 17x10x6.5 mm |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | Strip 1,5x1,5x330 mm |
1 x | 1/10 Pilot "Jack" |
2 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | Pilot "Dick" Legends Series (Slimline) |
1 x | Pilot "Goose" (Slimline) |
2 x | 1/6 Pilot "Buddy" |
2 x | 1/4 Pilot "Mike" |
2 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | Pilot "Duke" Legends Series (Slimline) |
2 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
2 x | Pilot JAN 1/4 Saiplanes |
2 x | 1/12 Pilot "Fighter" |
1 x | 1/12 Pilot "Tom" |
1 x | 1/6 Pilot "Tony" |
3 x | 1/12 Pilot "Langley" |
2 x | 1/7 Pilot "Japanese" |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | Smoke set "Glider" |
1 x | Ventral support for AX-18/AX-60 |
1 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | Remote electric ignition system |
1 x | AX-60 starters (5 pcs) |
1 x | Initior Transmitter FTX2 Wireless |
1 x | White smoke bombs AX-60 (5 pcs) |
1 x | Parachutist |
1 x | B4-0 rocket charges (6 pcs) |
1 x | "S" set for boats |
1 x | Green smoke canister 100 g |
1 x | White smoke canister 100 g |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | Initior Receiver FRX2 Wireless |
1 x | Red smoke canister 65 g |
1 x | Green smoke canister 65 g |
1 x | Parachute expulsion foam |
1 x | Red smoke canister 140 g |
1 x | White smoke bombs AX-3 (10 pcs) |
1 x | PCARD Wireless System |
1 x | "M" set |
1 x | Green smoke canister 140 g |
1 x | Red smoke bombs AX-60 (5 pcs) |
1 x | White smoke bombs AX-9 (10 pcs) |
1 x | Red smoke canister 100 g |
1 x | Blue smoke canister 100 g |
1 x | Electric rocket starters (6 pcs) |
1 x | Yellow smoke canister 100 g |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | AX-60 starters (5 pcs) |
2 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Carbon fiber rod 16 mm x 1000 mm |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Carbon fiber rod 1.0 mm x 1000 mm |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
2 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | Carbon fiber rod 10 mm x 1000 mm |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | Carbon fiber rod 0.8 mmx1000 mm |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Straightened threaded rod M2-1m |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
1 x | Straightened threaded rod M3 - 1m |
1 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | Parachute P4 |
1 x | SIMtransmitter 6 Mode 2 |
2 x | ABS tube 6.0x4.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
1 x | Connector Sub-D 2+5 Male |
1 x | 5 LiPo XH>EH adapter |
1 x | CM-3 |
1 x | Support XT60 conector (2 pcs) |
1 x | Cabling for Fox MDM1 wings |
1 x | Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | Long Switch On/Off micro |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Landing gear axle Ø 6 mm (2 uds) |
1 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
2 x | 3l Smoke oil |
1 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | Smoke set "M" |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
2 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
1 x | SERVO DES 588 BB MG |
1 x | SERVO DES 806 Pignons |
3 x | Pilot "Anthony" (Slimline) |
1 x | SSPS105 Super Hi-Power servo |
1 x | Servo JETI DSHV 3D13T (13 Kg) |
1 x | Strip ABS 2.0x10.0x1000 mm |
1 x | 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti |
1 x | ABS I Strip 20x10x1000 mm |
1 x | ABS Strip 1.5x2.0x1000 mm |
1 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
2 x | Gyro 3-Ejes REFLEX V2 FMS |
1 x | PSC 5 |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
2 x | 1/10 Pilot "Jimmy" |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | SERVO DES 568 MG |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | Round Rod 1,0x1000 mm |
1 x | SERVO DES 806 Pignons |
1 x | 1/6 Pilot "Garry" |
1 x | Strip 2,0x2,0x330 mm |
1 x | 10-15mm Servo Arm HITEC |
1 x | Strip 2,5x1,25x330 mm |
1 x | 3 mm Long Prop Adapter M5 |
1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
2 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Adapter 3,0 mm M5 for spinner 30 mm fixed propeller |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Mudguard wheels 112/127 mm |
1 x | Straightened rod Ø 7.0 mm x 1000 mm |
2 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | Sprung retractable undercarriage (Alfa model) |
1 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Adapter lead MPX/EC3 |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Suncover 100cc Red |
1 x | CC 02 |
1 x | Adapter lead MPX/XT60 |
2 x | JETImodel SINGLE BEC |
1 x | USB Interface Adapter |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
1 x | Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | CF tube (L 1000 mm Ø030 mm, Ø26 mm) |
1 x | Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | JETImodel DPS 40 |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
1 x | SPS Remote switch actuator |
1 x | EWC6 40 cm wing connector |
1 x | Female connector for 16 pines AWG |
1 x | Soporte metal para servos |
1 x | Servo KST X20-7512 V8.0 82kg 8.4v |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | 10-15mm Servo Arm |
1 x | 1/6 Pilot "Cindy" |
1 x | USB Adaptor OPTronics |
1 x | GPS Sensor + Logger OPTronics |
1 x | MAX BEC 2 |
1 x | wing/fuselage connector for 16 pines AWG 20-24 |
1 x | SBEC Jeti |
1 x | Female connector for 20 pines AWG |
1 x | FX three-position switched channel, long |
1 x | Male connector for 16 pines AWG |
![](images/pixel_black.gif) |
7,578.85EUR |