| 2 x | Truck-trailer for gliders 720 x 239 mm |
| 1 x | Field folding model stand SebArt |
| 2 x | Propeller balancer |
| 1 x | Angle measurer |
| 1 x | Surface Indicator Gauge Small |
| 2 x | Stickers-digit for marking |
| 1 x | Bec MR UBEC 5A (5v/6v/7v) |
| 1 x | JETImodel SINGLE BEC |
| 1 x | CC 02 |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | TrainerCord (master-learner) |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 2 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | TP/TopFuel - XH 2/3S Adapter |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 2 x | 2 LiPo XH>EH adapter |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 2 x | Canopy Latch |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 2 x | CC 03 |
| 2 x | CC 05 |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | 4 LiPo XH>EH adapter |
| 1 x | One touch canopy lock |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 2 x | Steering arm 12 mm Ø 4 mm |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | MPX-Dean "T" Adapter |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 2 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 2 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | BEC 3A FOXY |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 2 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | Cierre cabina aluminio Ø4, I=10 mm |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 3 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 2 x | Cockpit plastic closing |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | ABS angle 2,0x2,0x1000 mm |
| 1 x | U Profile ABS 8,0x4,0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
| 2 x | ABS angle 4,0x4,0x1000 mm |
| 1 x | ABS angle 10,0x10,0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
| 1 x | L-Connector 1.5 mm x 1000 mm |
| 1 x | ABS "T" angle 4.0x4.0x1000 mm |
| 1 x | Cross Connector 4.0 mm x 1000 mm |
| 1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
| 1 x | ABS "T" angle 10.0x10.0x1000 mm |
| 2 x | Profile ABS half cane 2.0x1000 mm |
| 2 x | Profile ABS half cane 2.5x1000 mm |
| 1 x | ABS angle 5,0x5,0x1000 mm |
| 1 x | ABS "T" angle 2.0x2.0x1000 mm |
| 1 x | Profile ABS Square 4 x 1000 mm |
| 1 x | Vasa model Catapult |
| 1 x | 800TVL CMOS camera for FPV |
| 1 x | Small aluminium horn red (2pcs) |
| 1 x | LH long black aluminium horn L31xH30 (2pcs) |
| 1 x | Horn 5/15 with M2 Bearing |
| 1 x | 6 mm aluminium horn with patella |
| 1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
| 1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
| 1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
| 1 x | Horn 16,5x20 mm (2 pcs) |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | Silicone 0,50 qmm servos wire Graupner(100 m) |
| 1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | Aluminium cap bolt washer M4 red (8 pcs) |
| 1 x | Cap Hispano Aviación |
| 1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
| 1 x | DPS Switch JR/JR |
| 1 x | 250 mm / 16 mm Airbrakes |
| 1 x | Allen wheel collar M4x4 |
| 1 x | 41x5,5 mm wires output (2 pcs) |
| 2 x | Double conector with JR adapter and 200 mm extension |
| 1 x | Connector Sub-D 2+5 Male |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | Cable grommet Ø 5 mm (4 uds) |
| 2 x | Adapter lead MPX/EC3 |
| 1 x | UBEC 6A KAVAN |
| 1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
| 1 x | Fully Threaded Steel Rod M3 |
| 1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
| 1 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
| 1 x | Wing bolts M3 Steel screw Red (2 pcs) |
| 1 x | Control for forward wheel (MINI) |
| 1 x | Cockpit metalic closing |
| 1 x | 140 mm rods + T patellas set for direction control |
| 1 x | Window mounting channel 5m |
| 1 x | 90 mm rods + T patellas set for direction control |
| 1 x | ABS angle 3,0x3,0x1000 mm |
| 1 x | Profile ABS half cane 7.0x1000 mm |
| 1 x | Rubber profile 10-2 mm 2M |
| 1 x | TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible |
| 1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 1 x | TS832 to Gopro AV/Power Cable |
| 1 x | DJI Mavic Air Fly More Combo |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | Covered closure or fairings |
| 2 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 3 x | Steering arm 16 mm Ø 3 mm |
| 1 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 2 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | Cable control set |
| 1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
| 1 x | Servo MKS HV6120H |
| 1 x | HV6150 Digital Servo |
| 1 x | Servo MKS HBL380 |
| 1 x | Servo MKS HV1220 |
| 1 x | La Capitania di Venetia 1:50 |
| 1 x | SCHARNHORST accessories |
| 1 x | Support Pitot JETI |
| 1 x | Support Filtro FESTO |
| 1 x | Support ECU Xicoy X-45 |
| 1 x | Servo MKS HV747 |
| 1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
| 1 x | Brass control horn M2 large for wire (2pcs) |
| 1 x | 6 mm M3 variable inclined horn |
| 1 x | 5 mm M2 variable horn |
| 1 x | 6 mm blue aluminium threaded horn with patella |
| 1 x | Horn 6/35 with M3 Bearing |
| 1 x | Control horn long w/ball |
| 1 x | 20 mm carbon horn |
| 1 x | 25 mm Sandpaper file |
| 1 x | Crawler GRE-24 RTR 1:24 Arena |
| 1 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | Snap short M2 (10 uds) |
| 1 x | Split M1,2x10 (10 pcs) |
| 1 x | Connector CAN 15 |
| 1 x | Extension 5 lipos JST - JST/C |
| 1 x | 30 cm BEC cable (male) |
| 1 x | EWC3 100 cm wing connector |
| 1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | Triple rod con. 2mm Pushrod (2 pcs) |
| 1 x | FX three-position switched channel, long |
| 1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
| 1 x | PWC4 wing/fuselage connector for 4 servos |
| 1 x | SLICK 360-A 104" (2640 mm) |
| 1 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
| 1 x | Pushrod greyline 3/2 with coupler M2 |
| 1 x | Snap long M2 (10 uds) |
| 1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
| 1 x | Lead with adhesive (2 pcs) |
| 1 x | Wheel collar 5 mm Ø (4 uds) |
| 1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 1 x | Snap pin for micro clevis (10 uds) |
| 1 x | Split pin 1x8 mm (10 uds) |
| 1 x | Cable grommet Ø 4 mm (4 uds) |
| 1 x | Split pin 1.6x16 mm (10 uds) |
| 1 x | EWC3 40 cm wing connector |
| 1 x | SUS wire 3m (nylon coated) |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
| 1 x | Female connector JST SH 1.0mm with 10 cm wire |
| 1 x | EWC6 40 cm wing connector |
| 1 x | SLICK 360-B 104" (2640 mm) |
| 1 x | Wheel collar 3.5 mm Ø (4 uds) |
| 1 x | 30 cm BEC cable (female) |
| 1 x | Micro Switch button |
| 1 x | CM-3 |
| 1 x | DPSI Ampere battery backer |
| 2 x | Female connector for 6 pines AWG |
| 1 x | Tip wing protector 40x14 (2 pcs) |
 |
| 7,578.28EUR |
