| 1 x | |
| 1 x | Servo NARO Max Std |
| 2 x | Pilot "Adolf" Legends Series (Slimline) |
| 1 x | SE Ring 250 mm (2 pcs) |
| 1 x | 1/12 Pilot "Cougar" |
| 1 x | Pasacables rectangular 40x15 mm (4 pcs) |
| 1 x | Spannlack 1000 ml |
| 1 x | Aro pasacable Ø20 mm (4 pcs) |
| 1 x | Horn with ball 40x30 |
| 1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
| 1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
| 1 x | L-Connector 1.0 mm x 1000 mm |
| 1 x | XH male balance (2S) connector (2 pcs) |
| 1 x | Aluminium red ball links M3 V1 (10 pcs) |
| 1 x | Connectors DEANS 4 pins (1 pair) |
| 2 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | Brass control horn M4 short for wire (4 pcs) |
| 1 x | Z type of cable coupler Ø 2 (2 uds) |
| 1 x | WingFix ULTRA Black Edition |
| 2 x | Profile ABS Square 3 x 1000 mm |
| 1 x | Horn 6/27 with M3 Bearing |
| 1 x | RH long aluminium horn (2pcs) |
| 2 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | LH long black aluminium horn L31xH30 (2pcs) |
| 2 x | Trailing edge BALSA 35x8x1000 mm |
| 1 x | Ball link V1 Ø7 M4/3 (6 uds) |
| 2 x | Cable with accesories |
| 2 x | Pine wood slat 1.5x3.0x1000 mm |
| 1 x | U Profile ABS 3,0x6,0x1000 mm |
| 3 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 1 x | SlowFlyer control horn (3 pcs) |
| 1 x | Conector AS150 7mm antichispazo (Set: 2 pares) |
| 1 x | Angle of incidence meter |
| 1 x | Z type of cable coupler Ø 1.8 (2 uds) |
| 1 x | XH female balance (3S) connector (2 pcs) |
| 2 x | ABS "T" angle 4.0x4.0x1000 mm |
| 1 x | DYNAMOMETER S-1580 |
| 1 x | Oracover Yellow CUB 2 m |
| 1 x | Monokote ROJO misil (1.8x0.65m) |
| 1 x | Monokote PLATINO metalizado (1.8x0.65m) |
| 1 x | Carbon fiber rod 1.5 mm x 2000 mm |
| 1 x | ABS tube 4.0x2.0x1000 mm |
| 2 x | Cable grommet Ø 5 mm (4 uds) |
| 1 x | ABS tube 7.0x5.0x1000 mm |
| 1 x | Hovercraft sailcloth |
| 2 x | Carbon fiber rod 0.5 mmx1000 mm |
| 1 x | Oracover ROYAL RED 2m |
| 2 x | Carbon fiber flat 1000x3.0x1.0 mm |
| 1 x | Monokote BLUE metalizado (1.8x0.65m) |
| 1 x | 45 mm rods set for direction control |
| 1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
| 1 x | Interface Realflight Simulator |
| 1 x | Slave-cable USB Easy Sim |
| 2 x | RF9 Flight Simulator with Spektrum Controller |
| 2 x | GameCommander USB Universal |
| 1 x | Xoar Electric Beechwood Prop 24x8 |
| 1 x | Xoar Electric Beechwood Prop 15x8 |
| 1 x | Pipa BULL MØ1 2.600mm |
| 2 x | Wing Joiner BULL MØ1 2.600mm |
| 1 x | Hobbylite Filler, Balsa colour |
| 2 x | Universal Colour Paste white 50 g |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | TrainerCord (master-learner) |
| 2 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 2 x | Walnut wood slat 3.0x3.0x1000 mm |
| 2 x | Profile ABS triangular 2.0x1000 mm 90º |
| 1 x | Profile ABS half cane 3x1000 mm |
| 1 x | Rubber profile 6-2 mm 2M |
| 1 x | Profile ABS triangular 4.0x1000 mm 90º |
| 1 x | Profile ABS half cane 2.5x1000 mm |
| 1 x | DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS |
| 1 x | Wheel FEMA 70 mm / 5 mm |
| 1 x | Foam wheel Ø 38 mm (2 pcs) |
| 2 x | 89x32 mm (3.5") axle Ø5 mm aluminium core wheel |
| 1 x | 4" - 102 x 45 mm Ø5 mm aluminium core wheel |
| 1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
| 1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
| 2 x | Telemetry interface ALTIS 12 cm |
| 2 x | Keypad ALTIS V4 |
| 2 x | Telemetry interface ALTIS 6 cm |
| 2 x | Device Terminal |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 2 x | BALSA triangular 15x15x1000 mm |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | Mahogany wood slat 2.0x2.0x1000 mm |
| 1 x | BEC 3A FOXY |
| 1 x | Walnut wood slat 1.5x1.5x1000 mm |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 2 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | 4 LiPo XH>EH adapter |
| 2 x | Beech dowels 4.0 x 1000 mm |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | CC 01 |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 2 x | Bec MR UBEC 5A (5v/6v/7v) |
| 2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | BALSA trip 10x10x1000 mm |
| 2 x | 30 cm BEC cable (female) |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 1 x | Circlick securite |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | CC 05 |
| 2 x | Beech dowels 10 mm x 1000 mm |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | CC 02 |
| 2 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | CC 03 |
| 2 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | 30 cm BEC cable (male) |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 2 x | Battery charging cable XT60 |
| 3 x | Pine wood slat 5.0x5.0x1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | USB HLS prog. interface |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Rubber profile 8-2 mm 2M |
| 1 x | ABS rectangular profile 10x5.0x1000 mm |
| 1 x | ABS "T" angle 2.0x2.0x1000 mm |
| 1 x | Profile ABS triangular 4.0x1000 mm 60º |
| 1 x | Flat Connector 4.0 mm x 1000 mm |
| 1 x | L-Connector 1.5 mm x 1000 mm |
| 1 x | Profile ABS half cane 4x1000 mm |
| 1 x | ABS angle 10,0x10,0x1000 mm |
| 1 x | Profile ABS half cane 6.0x1000 mm |
| 1 x | Profile ABS half cane 2.0x1000 mm |
| 1 x | ABS angle 3,0x3,0x1000 mm |
| 1 x | Rubber profile 10-2 mm 2M |
| 1 x | Profile ABS triangular 6.0x1000 mm 90º |
| 1 x | ABS "T" angle 10.0x10.0x1000 mm |
| 1 x | Profile ABS Square 4 x 1000 mm |
| 1 x | L-Connector 4.0 mm x 1000 mm |
| 1 x | ABS "T" angle 8.0x8.0x1000 mm |
| 1 x | ABS angle 2,0x2,0x1000 mm |
| 1 x | Profile ABS half cane 7.0x1000 mm |
| 2 x | Reflector 18 mm (2 pcs) |
| 1 x | Combo lighting module with covering drop shape |
| 1 x | 152x46 Ø6.0 mm aluminium core wheel |
| 1 x | 76x23 Ø3.5 mm aluminium core wheel |
| 1 x | Wheel FEMA 127 mm / 6 mm |
| 1 x | Wheel FEMA 112 mm / 6 mm |
| 1 x | 2.5 inch aluminium core wheel (1 pcs) |
| 1 x | Wheel 115 mm with electromagnet and brake disk + E-Brake (2 uds) |
| 1 x | Nose wheel 62 mm |
| 1 x | Wheel FEMA 152 mm / 8 mm |
| 1 x | Wheel FEMA 165 mm / 8 mm |
| 1 x | 69x25 mm (2.75") axle Ø4 mm aluminium core wheel |
| 1 x | Pushrod greyline 3/2 with coupler M2 |
| 1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
| 1 x | Screwdriver for Hexagon 1,27mm |
| 1 x | Hot Glue Stick GREEN |
| 1 x | Ball Link Plier |
| 1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
| 1 x | SIMtransmitter 6 Mode 2 |
| 1 x | Interface Jack Adapter IKARUS |
| 1 x | Simulador RealFlight RF-9.5 S (sin emisora) |
| 1 x | Servo mounting frame SV-1260MG |
| 1 x | Servoarm Aluminium SH-82 |
| 1 x | Rocket D9-7 |
| 2 x | Tank BULL MØ1 3L+14L Smoke (CMJets) |
| 2 x | Electric Landing Gear BULL Mo1 2.6 (Elektron Retracts) |
| 1 x | Electric Landing Gear GS-200 BULL Mo1 2.6 (Elektron Retracts) |
| 1 x | BULLIT Wing 840 mm |
| 1 x | Fuselage BULL MØ1 2.600mm |
| 1 x | Pilot "Dick" Legends Series (Slimline) |
| 1 x | Civilian pilot "Curt" size 9cm (Slimline) |
| 1 x | Universal Colour Paste deep black 250 g |
| 1 x | Presto SF Light Filler styrene-free (420 g) |
| 1 x | Starter EM Gear Power 250 |
| 1 x | |
| 1 x | Vacuum pump 12 CFM |
| 1 x | Servo DITEX TD2612S |
| 1 x | "L" servo arm 65x49 mm (2 pcs) |
| 1 x | SERVO DES 707 BB MG, Pignons |
| 1 x | Servo SAVOX SA-128S SG |
| 1 x | Servo SAVOX SV-1273 TG |
| 1 x | Strip 3,5x1,75x330 mm |
| 1 x | Servo SAVOX SV-1270 TG |
| 1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
| 1 x | Savox Brushless Servo SC-1267 SG |
| 1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
| 1 x | Ferrita 17x10x6.5 mm |
| 1 x | Silicone red 0,25 mm² wire (25 m) |
| 1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
| 1 x | Round Rod 1,0x1000 mm |
| 1 x | FunCub NG azul RR |
| 1 x | DRACO 2.0m Helice 14.5x9 4-Blade |
| 1 x | Dust collector for mould cleaning |
| 1 x | Digital scale up to 40 kg |
| 1 x | Servo TOPMODEL STANDARD S3217 |
| 1 x | Electric Landing Gear "Black Edition" BULL Mo1 2.6 (Elektron Re |
| 1 x | Giant Scale Muffler D.A. 70 |
| 1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
| 1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
| 1 x | F1 Prop Cap Can (Fuel Container Conection) |
| 1 x | Pipa 3D BULL MØ1 2.600mm |
| 1 x | Tank BULL MØ1 4L (CMJets) |
| 1 x | Tank BULL MØ1 (3.2 L) + 1x (0.9 L) + 1x (0.9L Smoke) PRO |
| 1 x | Bags BULL Mo1 2.6m "Luxe" |
| 1 x | Electric Landing Gear "Black Edition" BULL Mo1 2.6 GS200 (Electr |
| 1 x | Pilot "Goose" (Slimline) |
| 1 x | Set transmisions BULL Mo1 (dura/aluminium) |
| 1 x | Spray YELLOW Inca Lexan 150ml |
| 1 x | Axle for motor A30-XL V2 |
| 1 x | FesEx-Uni8 System |
| 1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
| 1 x | Tyres 70 mm Xclaibur (2 pcs) |
| 1 x | Lightweight aircraft wheel, 55x18.5x3 |
| 1 x | Switching module high voltage SXH |
| 1 x | 37 mm PVC transparent battery termo-retract (1 m) |
| 1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
| 1 x | GPS Sensor + Logger OPTronics |
| 1 x | Brass rod Ø 1.5 mm x 1000 mm |
| 1 x | OPTOTRONIX Aurora LCU |
| 1 x | POWERBOX Magic Jeti Switch |
| 1 x | DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual |
| 1 x | DPSI RV Mini 5 (2008) |
| 1 x | DPS Switch JR/JR |
| 1 x | DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch |
| 1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
| 1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
| 1 x | Cable adapter iCharger |
| 1 x | Propadapter for motor A60-V2 |
| 1 x | Lite Plywood panel 600x300x2.0 mm |
| 1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
| 1 x | 100 mm rods set for direction control |
| 1 x | Threaded coupler M2 (10 uds) |
| 1 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
| 1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
| 1 x | Male connector for 10 pines AWG |
| 1 x | 4,8x1000 mm 2:1 blue termoretract tube |
| 1 x | PowerBox Battery 4000 |
| 1 x | DPSI Micro - RCS |
| 1 x | Carbon fiber rod 5.0 mmx1000 mm |
| 1 x | Canopy Latch |
| 1 x | PowerBox iGyro 3xtra |
| 1 x | Charging Extension 50cm for 2 Battery |
| 1 x | Adjustable brass horn threaded M3 |
| 1 x | DPSI RV Mini 5 Magic |
| 1 x | Resistor 3W 5% OR82 |
| 1 x | DPSI LR-S (with push buttons) |
| 1 x | Extension for SensorSwitch 60cm |
| 1 x | DPSI RV Mini 6 Magic with Gas-Cap switch |
| 1 x | 110x55 mm SLH KOVO wheel |
| 1 x | 35x14 mm hard foam KOVO wheel (2 pcs) |
| 1 x | 120x60 mm SLH KOVO wheel |
| 1 x | Propadapter for motor A50 |
| 1 x | Screwdriver for Torx® TX6 |
| 1 x | A50 Motor Mount Alu complete set |
| 1 x | FesEx-Uni6 System |
| 1 x | JSM U/C Leg Springs for XCALIBUR (Pr) (6-12Kg) |
| 1 x | Alu-Cross for Backmount of A60-V2-Backmountmotors |
| 1 x | Fan for A60 |
| 1 x | Shaft for A60-L V4 |
| 1 x | Axle for motor A20-S (3 uds) |
| 1 x | EDF Stream-Fan 110mm kv780 |
| 1 x | GPS Altis |
| 1 x | Telemetry interface ALTIS 20 cm |
| 1 x | Altimeter Altis V4 |
| 1 x | Telemetry interface ALTIS to Futaba |
| 1 x | A/C quality beech plywood 600x300x0.6 mm |
| 1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
| 1 x | UBEC 6A KAVAN |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | Carbon plate 350x150x3.0 mm |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | Profile ABS Square 2 x 1000 mm |
| 1 x | 140 mm rods set for direction control |
| 1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
| 1 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | 80 mm rods set for direction control |
| 1 x | SPS Remote switch actuator |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | Balsa panel 3.0x100x1000 mm |
| 1 x | Balsa panel 6.0x100x1000 mm |
| 1 x | 6 mm blue aluminium threaded horn with patella |
| 1 x | 100 mm rods + T patellas set for direction control |
| 1 x | quality beech plywood BIRCH 600x300x2.0 mm |
| 1 x | Balsa panel 8.0x100x1000 mm |
| 1 x | 12,7x1000 mm 2:1 green termoretract tube |
| 1 x | Cabling for Fox MDM1 wings |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 1 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 1 x | DPSI Ampere battery backer |
| 1 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 1 x | Female connector for 20 pines AWG |
| 1 x | 2,4x1000 mm 2:1 black termoretract tube |
| 1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
| 1 x | Female connector for 12 pines AWG |
| 1 x | Female connector for 16 pines AWG |
| 1 x | CM-3 |
| 1 x | 2,4x1000 mm 2:1 green termoretract tube |
| 1 x | U Profile ABS 5,0x10,0x1000 mm |
| 1 x | Male connector JST SH 1.0mm with 10 cm wire |
| 1 x | 4,8x1000 mm 2:1 red termoretract tube |
| 1 x | 1,2x1000 mm 2:1 red termoretract tube |
| 1 x | EWC6 40 cm wing connector |
 |
| 21,055.60EUR |
