2 x | Cable grommet Ø 3.2 mm (4 uds) |
2 x | Aluminun wheel collar 2 mm Ø (4 uds) |
2 x | Cable grommet Ø 4 mm (4 uds) |
1 x | Allen wheel collar M4x4 |
1 x | 100 mm rods set for direction control |
2 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | 45 mm rods set for direction control |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Cockpit aluminium closing |
2 x | 80 mm rods set for direction control |
1 x | 100 mm rods + T patellas set for direction control |
1 x | Clip fixing for wing (2 pcs) |
1 x | 38x4,5 mm wires output (2 pcs) |
11 x | 45 mm rods + T patellas set for direction control |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
2 x | Allen wheel collar M3x3 |
1 x | Cable tie mounts 4.3 (4 uds) |
3 x | Cable grommet Ø 6.4 mm (4 uds) |
2 x | 90 mm rods + T patellas set for direction control |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | 140 mm rods set for direction control |
2 x | Clip mini fixing for wing (2 pcs) |
1 x | Allen wheel collar M3x5 |
2 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
2 x | 140 mm rods + T patellas set for direction control |
2 x | 28x5 mm wires output (2 pcs) |
1 x | Cable grommet Ø 5 mm (4 uds) |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
3 x | 250 mm / 16 mm Airbrakes |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
2 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Motor A2212/13T |
3 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
4 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Pushrod octagone 3/2 |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | Tip wing protector 28x10x12 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
1 x | 11 mm Rubber pads (14 pcs) |
1 x | LOWER TOW HOOK |
1 x | Tow hook for tug |
1 x | Fixed launching hook |
2 x | Adjustable launching hook |
1 x | Triple rod con. 2mm Pushrod (2 pcs) |
2 x | Lead with adhesive (2 pcs) |
1 x | Cockpit latch closing I=10 mm |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Cockpit aluminium closing 5.4g |
1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
1 x | Split pin 1x8 mm (10 uds) |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
2 x | Wing bolts M3 Steel screw Red (2 pcs) |
1 x | Split M1,2x10 (10 pcs) |
1 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | Snap short M2 (10 uds) |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
1 x | Futaba Female 40 cm extension |
1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | Premium servo extension 25cm |
3 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
1 x | Extension PVC 150 cm (Graupner) |
1 x | Extension silicon 10 cm (Futaba) |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Extension silicon 35 cm male (Futaba) |
1 x | Circlick securite |
1 x | Futaba male 40 cm extension |
1 x | Extension 100 cm (Futaba) |
1 x | Cable silicona female batt. receptor 30 cm (Futaba) |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | Micro flex hinge (12 uds) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Glases Moritz |
2 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | DLE 55 RA pipe plug |
1 x | DLE 30 complete electronic ignition |
1 x | DLE 85 / DLE111 / DLE120 Prop Washer |
1 x | 10 mm portholes (10 pcs) |
1 x | 29,0 mm propeller (left propeller) |
1 x | 3.2 mm Prop Adapter M6 |
1 x | 12x8 tree blades propeller |
1 x | 2.3 mm Adapter for 30 mm spinners |
1 x | CILINDER FOR DLE 55RA |
1 x | Ball bearing 6203 DLE |
1 x | Gasket set DLE-30 |
2 x | DLE 111 Carb gasket (V1) |
1 x | DLE 55 Ignition unit |
1 x | CILINDER FOR DLE55, DLE111, DLE222 |
1 x | SBEC 30 D |
1 x | PWC6 PowerWingConnector for 6 servos with fuselage socket |
1 x | XH male balance (3S) connector (2 pcs) |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | XH male balance (5S) connector (2 pcs) |
1 x | XH female balance (5S) connector (2 pcs) |
2 x | XT-60 connector (female) |
2 x | CENTRAL PROPELLER BOLT FOR DLE85/111/120 |
1 x | DLE 111 Old Crankshaft keyway |
1 x | Escape DLE-60 Izda |
3 x | Parachute PV6 for F3J |
2 x | Set cintas unión paracaídas 145 cm |
2 x | MAX pilot ARTF |
2 x | Rescue 1,8m2 / BackPack |
3 x | Aramid 50 daN 50 m |
1 x | 3 mm Prop Adapter M6 |
1 x | 3 mm Prop Adapter M6 |
1 x | 14 mm portholes (10 pcs) |
1 x | 15x7 tree blades propeller LEFT |
1 x | 3 mm Leader (L 100 mm) |
2 x | 2,3 mm Prop Adapter M6 |
1 x | 11x7 tree blades propeller |
1 x | 3,2 mm Prop Adapter M6 |
1 x | "L" servo arm 65x49 mm (2 pcs) |
1 x | Snap long M2 (10 uds) |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
1 x | Cockpit metalic closing |
1 x | Astra (Top Model) |
1 x | Bidule 55 V3 2460 mm |
1 x | ARTIST 1.560 mm |
1 x | 65 mm mini servo cover |
3 x | Aluminium tube with fibreglass case ø35x1.5mm, 500mm |
3 x | Aluminium tube with fibreglass case ø35x1.5mm, 1m |
2 x | 90x75 mm standart servo cover |
1 x | 18 mm wing servo holder |
1 x | Avia spare blue cockpit (Top Model) |
1 x | Astra wing Joinner (Top Model) |
1 x | 57 mm micro-mini servo cover |
1 x | BRASS CONTROL HORN M3x16 mm 2pcs |
1 x | 50x45 mm micro-mini servo cover |
2 x | Bidule 111 3000 mm |
1 x | Bidule 170 ARF 3.48 m |
2 x | Albatros ,spare cockpit (Top Model) |
2 x | Albatros red/white (Top Model) |
2 x | BULLIT Wing 1095 mm |
1 x | Angle measurer |
2 x | 20 mm tail wheel for 0,5-1 Kg models |
1 x | 90x60 mm standart servo cover |
1 x | Airtop balloon pneumatic wheels ø160 mm with bearing. 1 pair |
1 x | USB Interface REVOLECTRIX for CellPRO 10s |
2 x | Paramotor BackPack XXS 2 |
1 x | Needle bearing DLE55-RA |
1 x | Bag connector 2 mm |
2 x | XT-60 connector (male) |
1 x | Piston ring for DLE-20 RA |
1 x | Reed valve petal for DLE 170M |
1 x | XT-90 connector (pair) |
2 x | Kontronik connector (10 connectors, 5 pairs) |
1 x | Protector Connector Dean-T (1 pair) |
1 x | Conector MR-60 (pareja) |
1 x | Connectors MPX black female |
1 x | DLE 111 pipe plug |
1 x | Kit repair carburator DLE-85/111/120/222 |
1 x | GASKET SET FOR DLE40 |
2 x | MPX PCB "6 Pins", 5 pieces |
2 x | Red 3m5 mm connector holder |
1 x | Servo Connector Brackets (10 pcs) |
2 x | MPX PCB "Gender-Changer (5 pcs) |
1 x | Wing OXY 0,5 pulgadas2 |
2 x | Parachute BACKUP X100 |
2 x | Ballast 700gr OPALE |
2 x | Para-RC Mix |
2 x | LUCAS pilot ARTF |
2 x | Trike XL motor set (motor+esc+prop) |
2 x | Opale Rucksack |
1 x | BABY glider drawings (Aero-naut) |
1 x | Bocina 30 mm (1 pcs) |
1 x | SUS wire 3m (nylon coated) |
1 x | Steering arm 16 mm Ø 4 mm |
1 x | Axle for motor A20-S (3 uds) |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Motor B40 10L + MAXON 4,4:1 Keramik |
1 x | ALBATROS 3.0 m (orange/white) |
1 x | Escape DLE-60 Dcha |
1 x | Hub DLE 30 |
1 x | MR30 connector female |
1 x | Conector XT-30 (hembra) |
1 x | Ball bearing 6003 DLE |
1 x | Kit repair carburator DLE-170 |
1 x | Hub propeller DLE 111 V3/120 |
1 x | Connectors MPX black male |
1 x | Piston ring for DLE-55/111/222 |
1 x | Motor support DLE 30 (1 pcs) |
1 x | Piston ring for DLE-30 |
1 x | MR30 connector male |
1 x | Gasket set DLE-55RA |
1 x | Piston ring for DLE-20 |
2 x | MPX Support (2 pcs) |
2 x | MPX PCB "4 Pins", 5 pieces |
2 x | Soldering PCBs 8pin, 5 pieces |
1 x | Gasket set DLE-20 |
1 x | Reed valve petal for DLE 111 |
2 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Reed valve petal for DLE 120 |
1 x | Muffler DLE 20 |
1 x | Red 4 mm connector holder |
1 x | PROPELLER SCREW SET FOR DLE120 (6PCS) |
1 x | MPX screwable clips (4 pcs) |
1 x | Kit repair carburator DLE-20/20RA/30/35RA/40/55/55RA/60/61 |
1 x | Protector Connector MPX (1 pair) |
1 x | MPX Support |
1 x | Mounting frame MPX male connector |
1 x | XT-30 connector (pair) |
1 x | Soporte carbono MR30 (2 pcs) |
1 x | Contacto macho pin conector (10 pcs) |
1 x | Wing conexion 2 servos JR/Graupner 50 cm |
1 x | MPX housing with flange (4 pcs) |
1 x | Wing conexion 2 servos Futaba 50 cm |
1 x | XT60 Connector with Holder Male 2pcs |
2 x | Paramotor BackPack XXS (without accessories) |
2 x | Paramotor Kit Camo H1.5/ Ben Red |
2 x | Para-RC Trike "RC-Bullix" |
2 x | Windsock Ozone L - 700 mm |
2 x | Wing OXY 5,0 m2 |
1 x | Angle support XT60 conector |
1 x | Paramotor Trike XL |
2 x | Windsock Ozone L -1200 mm |
2 x | Para-RC "RC-Evo-Cross" Rescue |
2 x | Parachute P4 |
1 x | 290 mm 8x4 M4 shaft ship |
1 x | Cadena 1.0mm x 1 m |
1 x | Boat vents 10mm (2pcs) |
1 x | Aqua RACE 70 (without motor) |
1 x | BOX-Setup Actro-marine |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Triple rod con. 3mm Pushrod (2 pcs) |
1 x | Steering arm 12 mm Ø 4 mm |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | Motor A20-22 L EVO |
1 x | Canopy Latch |
1 x | Motor B20-18 L + 4:1 gearbox |
1 x | Motor A20-26 M EVO |
1 x | Motor A10-7 L 4,4:1 |
1 x | Wheel FEMA 127 mm / 6 mm |
1 x | Angled clevis with threaded rod M3 |
1 x | Wheel FEMA 90 mm / 6 mm |
1 x | Servo arm with 4 mm hole to FEMA 9810A |
1 x | Mudguard for 140/165 mm wheels |
1 x | THERMIK DREAM 3.000 mm (Topmodel) |
1 x | Siesta T tail (Topmodel) |
1 x | Fascination 3600 mm, Spare Elevator (Top Model) |
1 x | Ventus 2cx 4.5 m Sapare Fuselaje |
1 x | Electric spoiler 300 mm (2 pcs) |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Motor A20-6 XL 10-Pole EVO + 4,4:1 |
1 x | Motor A50-12 L V4 |
1 x | Cockpit plastic closing |
1 x | Extension silicon 10 cm (Graupner) |
1 x | Metal ring front FEMA |
1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
1 x | 400 Newtons FEMA absorber |
1 x | Swift S1 De-luxe JEPPESEN 3.140 mm |
1 x | Compact on-board starting system (9525) |
1 x | 100 Newtons FEMA absorber |
1 x | Wheel FEMA 82 mm / 5 mm |
1 x | Compact on-board starting system (9724) |
1 x | Wheel FEMA 100 mm / 6 mm |
1 x | Absorver mount set for 5-10 Kg models |
1 x | Compact on-board starting system (9715) |
1 x | 150 Newtons FEMA absorber |
1 x | Servo arm with 6 mm hole to FEMA 9800A |
1 x | Restrictor FESTO 3/3 mm |
1 x | Landing gear axle Ø 6 mm (2 uds) |
1 x | Servo arm with 5 mm hole to FEMA 9810A |
1 x | Compact on-board starting system (9713) |
1 x | Mudguard wheels 112/127 mm |
1 x | Wheel FEMA 178 mm / 8 mm |
1 x | Set freno para ruedas Dia. 127 mm |
1 x | Wheel FEMA 152 mm / 8 mm |
1 x | Servo holder for retract |
1 x | Compact on-board starting system (9512) |
1 x | Wheel FEMA 165 mm / 8 mm |
1 x | Wheel FEMA 70 mm / 5 mm |
1 x | Brake for 140 mm wheels |
1 x | Gearwheel 9724/09 for ZG 45 |
1 x | COMFORT MOUNT ø 25 mm |
1 x | 58 mm micro servo cover |
1 x | ESC XREG 60 Amp 2-6 LiPo BEC 5V/3A |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | ACTIVE ARF Electric 1.995 mm |
1 x | STANDOFF GAS ENGINE MOUNT 38 mm |
1 x | CF tube (L 1000 mm Ø030 mm, Ø26 mm) |
1 x | Gracia Maxi ARF (Top Model) |
1 x | 34 mm Alu spinner 3.17 mm pleg. propeller |
1 x | PVC 0,14 qmm servos wire Hitec/Mpx (5 m) |
1 x | BULLIT Wing 840 mm |
1 x | 2 LiPo XH>EH adapter |
|
24,381.04EUR |