| 2 x | SkyMaxx 1.550 mm (kit) |
| 1 x | Jodel D.9 BeBe 2.400 mm Kit |
| 2 x | CC 01 |
| 1 x | "M" set |
| 1 x | CC 02 |
| 1 x | Universal Colour Paste deep black 50 g |
| 1 x | Oratex Antik 2m |
| 1 x | ABS "T" angle 10.0x10.0x1000 mm |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | Long pinned hinge (6 uds) |
| 1 x | Solvent Plasti Dip 1000 ml |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | Ball link Aluminio M3 (2 pcs) |
| 1 x | Brass ball links BS M3 V1 (10 pcs) |
| 2 x | Horn 5/10 with M2 Bearing |
| 1 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | Spannlack 1000 ml |
| 1 x | Soporte filtro FESTO (4 pcs) |
| 1 x | Support ECU Xicoy X-45 |
| 1 x | Red smoke canister 65 g |
| 1 x | Green smoke canister 100 g |
| 1 x | Blue smoke canister 100 g |
| 1 x | AX-60 starters (5 pcs) |
| 1 x | Profile ABS half cane 4x2.5x1000 mm |
| 1 x | Nitroverdu 500 ml |
| 1 x | Horn 13,5x16 mm (2 pcs) |
| 1 x | Connector Sub-D 2+5 Female |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | Partall paste 650 g |
| 1 x | Extra-long adjustable aluminium control horn 2,8x34 |
| 1 x | ABS angle 1.5x1.5x1000 mm |
| 1 x | Brass control horn M2 short for wire (2 pcs) |
| 2 x | Oracover White 2 m |
| 1 x | White smoke bombs AX-9 (10 pcs) |
| 2 x | Profile ABS triangular 2.0x1000 mm 90º |
| 2 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Profile ABS half cane 7.0x1000 mm |
| 1 x | Oracover light Grey 2m |
| 1 x | Profile ABS Square 2 x 1000 mm |
| 1 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 1 x | Profile ABS Square 4 x 1000 mm |
| 1 x | 1000 ml sealer (DOPE) |
| 1 x | 5 mm M2 variable inclined horn |
| 1 x | Spray YELLOW Inca Lexan 150ml |
| 1 x | SE Ring 250 mm (2 pcs) |
| 1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
| 2 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
| 2 x | Oracover Azul Cielo 2 m |
| 2 x | ABS "T" angle 6.0x6.0x1000 mm |
| 1 x | Xplorer2 anemometro |
| 1 x | Cable coupler M3 (10 uds) |
| 1 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 1 x | SE Ring 330 mm (4 pcs) |
| 2 x | Suncover 100cc Red |
| 1 x | Red smoke canister 100 g |
| 1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
| 1 x | 20 g tin paste |
| 1 x | Mixers smoke bombs AX-60 (5 pcs) |
| 1 x | Brass control horn M2 large for wire (2pcs) |
| 1 x | |
| 1 x | Angle measurer |
| 1 x | Spray adhesive AEROFIX 2 |
| 1 x | Spinner Alumin. fixed propeller 30 mm / 3,2 mm |
| 1 x | Universal Colour Paste white 50 g |
| 1 x | SE Ring 480 mm (2 pcs) |
| 1 x | Recessed MPX connector support (6 pcs) |
| 1 x | Angle of incidence meter |
| 1 x | DPSI magnetic switch actuator (housing) |
| 1 x | Rubber profile 6-2 mm 2M |
| 1 x | Support pumb/filter Xicoy X45 |
| 1 x | Oracover GREY Seafire Sea 2m |
| 1 x | Yellow smoke bombs AX-60 (5 pcs) |
| 2 x | BRASS CONTROL HORN M3x16 mm 2pcs |
| 2 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
| 2 x | PPM Encoder Module |
| 1 x | Oracover Black 10 m |
| 1 x | SE Ring 300 mm (2 pcs) |
| 1 x | Oracover CHROME 2m |
| 1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
| 1 x | B4-0 rocket charges (6 pcs) |
| 1 x | Dean "T" - Futaba Adapter |
| 2 x | Horn 6/20 with M3 Bearing |
| 1 x | 6 mm M3 variable horn |
| 1 x | Oracover Yellow CADMIO 10 m |
| 1 x | SE Ring 400 mm (2 pcs) |
| 1 x | Cable coupler M3 (10 uds) |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | ORACOVER Fluor red (2 m) |
| 1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Smoke set "Glider" |
| 1 x | Profile ABS triangular 4.0x1000 mm 60º |
| 1 x | Oratex Natural White 20m |
| 1 x | Profile ABS half cane 2.5x1000 mm |
| 1 x | Kwik link AL M3 con Clip (2 pcs) |
| 1 x | Horn F3A de Titanium 16 mm (2 units) |
| 1 x | Monokote PLATINO metalizado (1.8x0.65m) |
| 1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
| 1 x | Release wax 250ml |
| 1 x | Support XT60 conector (2 pcs) |
| 1 x | 3l Smoke oil |
| 1 x | Profile ABS Square 1 x 1000 mm |
| 1 x | Hobbylite Filler, Balsa colour |
| 1 x | ABS angle 4,0x4,0x1000 mm |
| 1 x | Spinner NUT M5 |
| 1 x | Black smoke bombs AX-60 (5 pcs) |
| 1 x | Oracover Black 2 m |
| 1 x | 20x1000 mm Ring Strap Back To Back |
| 1 x | 30 cm BEC cable (male) |
| 1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Oracover Orange 2 m |
| 1 x | Cable coupler M2 (10 uds) |
| 1 x | Cabling for Fox MDM1 wings |
| 2 x | CNC FPV Display screen&Transmitter Holder Vertical |
| 1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
| 1 x | Conector JAPAN G2 Set 5 pares |
| 1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | Glases Moritz |
| 1 x | Foam plastic plates (310x210x2 mm) |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | Extension 100 cm (Futaba) |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | Canopy Latch |
| 1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 1 x | ABS tube 8.0x7.0x1000 mm |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | ABS Strip 1.5x6.0x1000 mm |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | Strip ABS 2.0x5.0x1000 mm |
| 1 x | ABS Strip 1.0x2.0x1000 mm |
| 1 x | BALSA triangular 10x10x1000 mm |
| 1 x | ABS tube 18.0x16.0x1000 mm |
| 1 x | Transmitter Crystal 35 Mc/s Ch 62 |
| 1 x | Cabel "Y" 15 cm |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Aluminium sheet 500x250x0,5mm |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
| 1 x | Prolongador S-Bus JR/JR 10cm |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | ABS Strip 1.0x5.0x1000 mm |
| 1 x | Screw-lock connector M2 (2 uds) |
| 1 x | Propeller hub spacer 8/5.5 |
| 1 x | ABS Strip 1.0x4.0x1000 mm |
| 1 x | Ventus 1:4 set of instruments |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
| 1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
| 1 x | AC-10 pre-rotacion with motor |
| 1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
| 1 x | Servoarm Aluminium SH-82 |
| 1 x | Medidor ángulos y/o incidencias |
| 1 x | Servo GO-10S41MG 10.5 kg.cm 0.075s/60º |
| 1 x | Servo GO-12S70MG 20.5kg.cm 0.06s/60º |
| 1 x | Rubber profile 10-2 mm 2M |
| 1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
| 1 x | 150 mm inflatable superlight deluxe wheel (2 pcs) |
| 1 x | 64x20 mm (2.5") Type jets aluminium core wheel |
| 1 x | Servo inverter |
| 1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
| 1 x | 3 mm Short Prop Adapter M5 |
| 1 x | Gear set HITEC HS-311/322/325BB |
| 1 x | Servo HITEC D145 SW |
| 1 x | wire tensioner (silver) |
| 1 x | Aluminium blue ball links M3 V1 (10 pcs) |
| 1 x | Gear set HITEC HS205/225MG/5245MG/7245MH |
| 1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
| 1 x | Servo HITEC D950 TW |
| 1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
| 1 x | Servo HITEC HS-45 HB |
| 1 x | wire tensioner (red) |
| 1 x | ABS rectangular profile 10x5.0x1000 mm |
| 1 x | Soporte servo KST X10 mini / DS135MG |
| 2 x | Turnbuckle M2,5x27/43 (2pcs) |
| 1 x | Oracover White 10 m |
| 1 x | 40,0 mm hydro-propeller (left hydropropeller) |
| 1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
| 1 x | ABS tube 6.0x4.0x1000 mm |
| 1 x | Receiver replacement antenna, approx. 85 |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | Teflon rollers 80 mm x 15 mm Diam. |
| 1 x | ABS tube 9.0x7.0x1000 mm |
| 1 x | Coupling bush 5 - 5 mm |
| 1 x | XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell |
| 1 x | Protective Cover for wires Ø 10 mm 1000 mm |
| 1 x | Fiberglass heat shield Ø 4 mm 1000 mm |
| 1 x | Antonov AN2 Scale 1/6 - 3m |
| 1 x | Aluminium servo arm (2 uds) |
| 1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
| 1 x | 6,4x1000 mm 2:1 red termoretract tube |
| 1 x | 1,6x1000 mm 2:1 red termoretract tube |
| 1 x | Surface Indicator Gauge Small |
| 1 x | ABS angle 3,0x3,0x1000 mm |
| 1 x | Brazo servo KAVAN doble aluminio 25T - 2.5" M3 |
| 1 x | Sun Cover BULL Mo1 2.6 (Hispano Aviacion) |
| 1 x | Prop Shaft Adapter 5 mm "long" |
| 1 x | PVC transparent battery termo-retract 51 mm (1 m) |
| 1 x | SAVOX SH 0255 MG servo |
| 1 x | ABS rectangular profile 12x6.0x1000 mm |
| 1 x | Servo GO-1023MG 7.0 kg.cm 0.09s/60º |
| 1 x | Propeller balancer |
| 1 x | 102x26 Ø6.0 mm aluminium core wheel |
| 1 x | Airtop balloon pneumatic wheels ø160 mm with bearing. 1 pair |
| 1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
| 1 x | Pulley brass 2,5/1 (2 pcs) |
| 1 x | Metal ball clevis M3 (10 uds) |
| 1 x | 63x12 mm foam special light KOVO wheel with radius (2 pcs) |
| 1 x | 89x25 mm (3.50") Type jets aluminium core wheel |
| 1 x | Ø 2 mm pin for Kwik link MPJ2162/2163 (6 pcs) |
| 1 x | 115x29 mm (4.50") Type jets aluminium core wheel |
| 1 x | 73x24 mm hard foam KOVO wheel with bearing (2 pcs) |
| 1 x | 90x45 mm hard foam KOVO wheel |
| 1 x | 4" - 102 x 45 mm Ø5 mm aluminium core wheel |
| 1 x | 73x24 mm hard foam KOVO wheel (2 pcs) |
| 1 x | 45x19 mm hard foam KOVO wheel (2 pcs) |
| 1 x | Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm |
| 1 x | Servo HITEC D85 MG |
| 1 x | SE Ring 450 mm (2 pcs) |
| 1 x | Extra long horn 60x30 |
| 1 x | Threaded coupler M2,5 (10 pcs) |
| 1 x | Spinner Alumin. fixed propeller 30 mm / 2,3 mm |
| 1 x | 6 mm blue aluminium threaded horn with patella |
| 1 x | Spinner Alumin. fixed propeller 40 mm / 4,0 mm |
| 1 x | Horn 5/15 with M2 Bearing |
| 1 x | Servo HITEC D941 TW |
| 1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
| 1 x | 6 mm M3 variable inclined horn |
| 1 x | Screws set for Hitec MG arms servo |
| 1 x | Rubber profile 8-2 mm 2M |
| 1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
| 1 x | Fibreglass-Spinner BS ∅155 x 200 mm |
 |
| 7,702.32EUR |
