| 3 x | Cable grommet Ø 3.2 mm (4 uds) |
| 1 x | 140 mm rods set for direction control |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | 45 mm rods + T patellas set for direction control |
| 1 x | 140 mm rods + T patellas set for direction control |
| 1 x | Cable grommet Ø 6.4 mm (4 uds) |
| 1 x | 45 mm rods set for direction control |
| 1 x | Cable grommet Ø 5 mm (4 uds) |
| 1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
| 1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
| 1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
| 1 x | 100 mm rods set for direction control |
| 1 x | Allen wheel collar M3x5 |
| 1 x | Canopy Latch |
| 1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
| 1 x | 250 mm / 16 mm Airbrakes |
| 1 x | Allen wheel collar M3x3 |
| 1 x | Cockpit aluminium closing |
| 1 x | Clip mini fixing for wing (2 pcs) |
| 1 x | 100 mm rods + T patellas set for direction control |
| 1 x | Cable grommet 9.5 mm (4 uds) |
| 2 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
| 1 x | Allen wheel collar M4x6 |
| 2 x | Aluminun wheel collar 2 mm Ø (4 uds) |
| 1 x | Clip fixing for wing (2 pcs) |
| 1 x | 28x5 mm wires output (2 pcs) |
| 1 x | Cable S.BUS 3 salidas 100 mm |
| 1 x | Extension 30 cm (Futaba) |
| 1 x | Extension 7.5 cm |
| 1 x | Extension 15 cm (Futaba) |
| 1 x | 200 mm extensión servo HITEC/JR |
| 1 x | Extension silicon 25 cm (Futaba) |
| 1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
| 1 x | Extension silicon 30 cm female (Graupner) |
| 1 x | Extension 100 cm (Futaba) |
| 1 x | Extension silicon 100 cm (Graupner) |
| 1 x | Extension silicon 30 cm male (Futaba) |
| 1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
| 1 x | Premium servo extension 100cm |
| 1 x | Extension silicon 10 cm (Futaba) |
| 2 x | Extension silicon 30 cm male (Graupner) |
| 1 x | Extension silicon 50 cm (Futaba) |
| 1 x | Cabel "Y" 30 cm (graupner) |
| 1 x | Extension lead 15 cm Multiplex |
| 1 x | Futaba Female 40 cm extension |
| 1 x | Extension silicon 100 cm (Futaba) |
| 1 x | Extension silicon 75 cm (Graupner) |
| 1 x | Extension silicon 30 cm female (Futaba) |
| 1 x | Extension silicon 50 cm (Graupner) |
| 1 x | Extension silicon 75 cm (Futaba) |
| 1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
| 2 x | Ventus 1:4 set of instruments |
| 1 x | Ferrita con funda |
| 1 x | Ferrita 27x14x7 mm |
| 1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
| 3 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | Strip ABS 2.0x10.0x1000 mm |
| 3 x | M2,5 Diam metal ball link V3 (2 pcs) |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 1 x | Ball link M3 (10 pcs) |
| 2 x | Strip 2,5x1,25x330 mm |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 1 x | Round Rod 1,0x1000 mm |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | Strip 3,5x1,75x330 mm |
| 1 x | Strip ABS 2.0x3.0x1000 mm |
| 1 x | Socket head long ball link M3 (2 uds) |
| 1 x | Joint with bearing M3 22x5,5 |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 2 x | Short ball link M2 (6 uds) |
| 1 x | Round Rod 1,25x1000 mm |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | ABS Strip 1.5x4.0x1000 mm |
| 2 x | M2,5 5Diam metal ball link V3 (2 pcs) |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Ball link M1.6 (6 uds) |
| 2 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 2 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
| 1 x | Short ball link M3 (6 uds) |
| 3 x | M2,5 5Diam black ball link V2 (2 pcs) |
| 1 x | Round Rod 2,5x1000 mm |
| 1 x | Ball link M3 (6 uds) |
| 2 x | Socket head ball link M3 (2 uds) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | Strip 1,5x1,5x330 mm |
| 3 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
| 1 x | Round Rod 2,0x1000 mm |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 1 x | Socket head ball link M3 (2 uds) |
| 2 x | ABS Strip 1.5x2.0x1000 mm |
| 1 x | Blue metalic ball link M2/2 azul (2 pcs) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 2 x | M2 5Diam short black ball link V2 (2 pcs) |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 1 x | M2,5 5Diam short black ball link V2 (2 pcs) |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
| 2 x | Long ball link M1.6 (6 uds) |
| 2 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 1 x | ABS Strip 1.0x5.0x1000 mm |
| 1 x | Strip ABS 2.0x8.0x1000 mm |
| 2 x | Round Rod 4,0x1000 mm |
| 2 x | ABS Strip 1.0x3.0x1000 mm |
| 2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | Joint with bearing M2,5 22x5,5 |
| 3 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
| 1 x | Short ball link M1.6 (6 uds) |
| 1 x | ABS Strip 1.5x8.0x1000 mm |
| 1 x | ABS Strip 1.5x3.0x1000 mm |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 1 x | SE Ring 300 mm (2 pcs) |
| 1 x | Cockpit aluminium closing 5.4g |
| 1 x | Landing gear frontal support 25x32x16 |
| 1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
| 1 x | 30 cm DEANS female connector |
| 1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
| 1 x | SUS wire 3m (nylon coated) |
| 1 x | 41x5,5 mm wires output (2 pcs) |
| 1 x | Extension silicon 25 cm (Graupner) |
| 1 x | ABS Strip 1.5x6.0x1000 mm |
| 1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
| 1 x | resin-hardener package L-385 with hardener H-385 (875 g) |
| 3 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
| 2 x | Ferrita 14x8x5.5 mm |
| 1 x | Carbon plate 350x150x3.0 mm |
| 1 x | Oracover White 10 m |
| 1 x | PVC termo-retract battery 95 mm blue transparent (1 m) |
| 1 x | PVC red battery termo-retract 68 mm (10 m) |
| 1 x | Oratex Yellow Cub 10 m |
| 1 x | Oracover Orange 2 m |
| 1 x | Ply-Span 450x600/13g Black |
| 1 x | PVC termo-retract battery 45 mm transparent orange (1 m) |
| 1 x | PVC termo-retract battery 45 mm black transparent (1 m) |
| 1 x | ORACOVER transparent Yellow (10 m) |
| 1 x | PVC transparent battery termo-retract 70 mm (10 m) |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | Connector CAN 15 |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | 6 mm red aluminium threaded horn with patella |
| 1 x | Horn with ball 55x40 |
| 1 x | LH long black aluminium horn L31xH30 (2pcs) |
| 1 x | Big Crow DLE-170M |
| 1 x | Lead with adhesive (2 pcs) |
| 1 x | PVC yellow battery termo-retract 69 mm (10 m) |
| 1 x | SIG Coverall 1.2x0.9 m |
| 1 x | PVC transparent red battery termo-retract 68 mm (10 m) |
| 1 x | Ferrita 17x10x6.5 mm |
| 1 x | Colormatic 2K Soft fine putty white, 1 kg |
| 1 x | M3/5 Diam metal short ball link V3 (2 pcs) |
| 1 x | ABS 500 x 400 x 0,5 mm (white) |
| 1 x | Heat-conducting adhesive (2x2ml), WLK DK 4 |
| 1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
| 1 x | Pegamento Pu R 50g polyuretano |
| 1 x | M3/5Diam metal ball link V3 (2 pcs) |
| 1 x | Round Rod 6,0x1000 mm |
| 1 x | Ball link M3 RPA's-UAV's |
| 1 x | ABS Strip 1.0x4.0x1000 mm |
| 1 x | Carbon plate 350x150x2.0 mm |
| 1 x | Strip 2,0x2,0x330 mm |
| 1 x | Mould Resin P + Hardener EPH 161-P, kit/ 585 g |
| 1 x | Ball link M2,5 (10 pcs) |
| 1 x | Fiberglass plate 620x540x0,2 mm |
| 1 x | resin-hardener L-385 H-385 (5000 g) |
| 1 x | Fibra vidrio 25g 110 cm/ 100m (Interglass 02034, finish FE800 p |
| 1 x | Ball link M2 (10 pcs) |
| 1 x | Fiberglass plate 620x540x3,2 mm |
| 1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
| 1 x | Battery charging cable XT60 |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Cabling for Fox MDM1 wings |
| 1 x | Connector Sub-D 2+5 Female |
| 1 x | WingFix ULTRA Black Edition |
| 1 x | Angle measurer |
| 1 x | Propeller MENZ-S 18x10 |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Adaptador USB - YGE |
| 1 x | 200 Newtons FEMA absorber |
| 1 x | LA500 freewheel bearing |
| 1 x | SWTU2 switch |
| 1 x | SBEC 30 D |
| 1 x | Set Legs + Wheels with brake ASPIRE |
| 1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
| 1 x | E_brakes electronics |
| 1 x | Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC |
| 1 x | PowerBox SparkSwitch RS |
| 1 x | Motor DLE 200cc Std |
| 1 x | ABS tube 7.0x5.0x1000 mm |
| 1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
| 1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
| 1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
| 1 x | Glass fibre braided sleeve (45mm) roll 10m |
| 1 x | Glass fibre sleeve Ø 20 mm X 20m |
| 1 x | VIPER JET 2.2m + Electric landig Gear Deco: 01 Red-Blac-kWhit |
| 1 x | Styrene plate 320x120x1.0 mm |
| 1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
| 1 x | AXI 2814/16 V2 |
| 1 x | AXI 2820/10 V2 Long |
| 1 x | Program card KAVAN PRO |
| 1 x | AXI 2826/6 V2 |
| 1 x | ESC KAVAN R-80SB SBEC 80A |
| 1 x | AXI 2820/8 V2 Long |
| 1 x | CC 11 Conector |
| 1 x | ESC Ripmax QUANTUM 80A SBEC |
| 1 x | Propeller MENZ-S 18x8 3-Blades |
| 1 x | Esc MasterSPIN 16 Pro |
| 1 x | FALCON 29X9 CARBON PROPELLER (GAS) |
| 1 x | Propeller APC 15x8 Glow/Gas |
| 1 x | FALCON 26X10 CARBON PROPELLER (GAS) |
| 1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
| 1 x | Esc MasterSPIN 66 Pro |
| 1 x | Propeller MENZ-S 18x8 |
| 1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | Propeller MENZ-S 17x8 |
| 1 x | 5.8G Receiver Helical Antenna with protecting case (SMA plug) 12 |
| 1 x | Landing gear axle Ø 6 mm (2 uds) |
| 1 x | 400 Newtons FEMA absorber |
| 1 x | Absorver mount set for 5-10 Kg models |
| 1 x | 150 Newtons FEMA absorber |
| 1 x | AL Axle Shaft 4.0x16 mm (2 uds) |
| 1 x | Cable Cargador FUTABA |
 |
| 15,418.04EUR |
