| 2 x | Straightened rod Ø 5.0 mm x 1000 mm |
| 1 x | Straightened threaded rod M2-1m |
| 1 x | BALSA triangular 15x15x1000 mm |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | Straightened rod Ø 0.8 mm x 1000 mm |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | Straightened rod Ø 4.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 3.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 0.5 mm x 1000 mm |
| 1 x | Brass rod Ø 1.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 1.5 mm x 1000 mm |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | A/C quality beech plywood 600x300x1.5 mm |
| 2 x | Balsa panel 2.0x100x1000 mm |
| 1 x | Balsa panel 1.0x100x1000 mm |
| 1 x | Balsa panel 2.5x100x1000 mm |
| 1 x | Straightened rod Ø 1.0 mm x 1000 mm |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | Straightened rod Ø 8.0 mm x 1000 mm |
| 3 x | Brass rod Ø 0.8 mm x 1000 mm |
| 1 x | Straightened rod Ø 4.0 mm x 1000 mm |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | Straightened rod Ø 14.0 mm x 1000 mm |
| 3 x | Straightened rod Ø 5.5 mm x 1000 mm |
| 1 x | Brass rod Ø 0.5 mm x 1000 mm |
| 2 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
| 1 x | A/C quality beech plywood 1520x750x4.0 mm |
| 1 x | Straightened rod Ø 1.2 mm x 1500 mm |
| 1 x | Straightened rod Ø 7.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 6.0 mm x 1000 mm |
| 3 x | Straightened rod Ø 2.5 mm x 1000 mm |
| 1 x | Straightened threaded rod M3 - 1m |
| 2 x | A/C quality beech plywood 600x300x0.8 mm |
| 3 x | Straightened rod Ø 1.5 mm x 1500 mm |
| 1 x | Balsa panel 3.0x100x1000 mm |
| 1 x | BALSA triangular 6x6x1000 mm |
| 2 x | A/C quality beech plywood 600x300x8.0 mm |
| 1 x | Balsa panel 8.0x100x1000 mm |
| 2 x | Straightened rod Ø 2.0 mm x 1000 mm |
| 1 x | BALSA leading edge 8x10x1000 mm |
| 1 x | Opale Rucksack |
| 4 x | Dean "T" - Futaba Adapter |
| 1 x | Cabling for Fox MDM1 wings |
| 2 x | 4 LiPo XH>EH adapter |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 2 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
| 1 x | Windsock Ozone L -1200 mm |
| 4 x | 30 cm BEC cable (male) |
| 2 x | CC 01 |
| 1 x | Parachute BACKUP X100 |
| 1 x | Rescue 1,8m2 / BackPack |
| 1 x | Paramotor BackPack XXS (without accessories) |
| 4 x | Connector CAN 15 |
| 1 x | Paramotor Trike XL |
| 2 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | Connector Sub-D 2+5 Male |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | Circlick securite |
| 3 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | Brass control horn M2 long for wire (10pcs) |
| 1 x | Spray adhesive INFUTAC (Clear) 500 ml |
| 1 x | M3 Maxi ball link (2 uds) |
| 1 x | WingFix ULTRA Black Edition |
| 1 x | Monokote PLATINO metalizado (1.8x0.65m) |
| 1 x | ABS Strip 1.0x4.0x1000 mm |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Electric starter suitable for the DLE111, DLE120 and DLE85. |
| 1 x | Xplorer4 anemometro |
| 1 x | Squared carbon wing joinner 5x5x220 mm |
| 1 x | Hot Glue Stick GREEN |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 1 x | Baseplate servo |
| 1 x | Xplorer2 anemometro |
| 1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
| 1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
| 1 x | Oils Pumps Empty (1 liter) |
| 2 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
| 1 x | Hot Glue Stick BLACK |
| 1 x | Support Filtro FESTO |
| 1 x | Support Antena 2.4 Ghz (2 pcs) |
| 1 x | Support pumb/filter Xicoy X45 |
| 1 x | Soporte grifo FESTO (2 pcs) |
| 1 x | Support XT60 conector (2 pcs) |
| 2 x | |
| 1 x | A50 Motor Mount Alu complete set |
| 2 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
| 1 x | Battery LiFe TopFuel 3100 mAh 3s MTAG 30C |
| 1 x | Aluminium Hub "Z" for folding Props 38 mm M8 Shaft 8 mm |
| 2 x | DUPLEX 2,4EX Stick with Potentiometer for Transmitter DC/DS |
| 2 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
| 1 x | Alu-Cross for Backmount of A60-V2-Backmountmotors |
| 1 x | Axle for motor A20-S (3 uds) |
| 1 x | Balsa panel 6.0x100x1000 mm |
| 1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
| 1 x | Aluminium Hub for folding Props 35 mm M8 Shaft 6 mm |
| 1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
| 1 x | A40 Backmountset complete |
| 1 x | Aluminium Hub for folding Props 43 mm M8 Shaft 5 mm |
| 1 x | Servo SAVOX SW-1250 MG digi |
| 1 x | Servo KST X06H - 1.8Kg.cm 7mm 6g |
| 1 x | Hitec 25 mm servo arm with ball link |
| 1 x | ALU servo arm 90º 3 mm shaft |
| 1 x | 90x60 mm standart servo cover |
| 1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
| 1 x | 50 mm servo arm with bearing (2 pcs) |
| 1 x | Servo GO-1013 MG 3.8kg |
| 1 x | Servo DL3017 Digi 17Kg-0.15s/60º |
| 1 x | 18 mm wing servo holder |
| 1 x | Servoarm Aluminium SH-82 |
| 1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
| 1 x | A/C quality beech plywood 600x300x0.6 mm |
| 1 x | Gold aluminium servo arm V1-JR 1,25" inch M3 |
| 1 x | Pine wood slat 3.0x10.0x1000 mm |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 1 x | BALSA triangular 10x10x1000 mm |
| 2 x | SPS Remote switch actuator |
| 2 x | Ferrita 27x14x7 mm |
| 2 x | CC 03 |
| 1 x | Servo Metal Horn 15.5 mm MKS |
| 3 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | Set cintas unión paracaídas 145 cm |
| 1 x | Parachute P4 |
| 2 x | Servo slow down unit (0,7-14,7 sec ) |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | Opto Gas Engine Kill Switch |
| 1 x | Servo MKS HV747 |
| 2 x | Prolonguer for Balancer Thunder Power 6S |
| 1 x | Aramid 50 daN 50 m |
| 1 x | Parachute PV6 for F3J |
| 3 x | Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm |
| 1 x | Male connector JST SH 1.0mm with 10 cm wire |
| 1 x | 2 LiPo XH>EH adapter |
| 1 x | 3 LiPo XH>EH adapter |
| 1 x | Extension 5 lipos JST - JST/C |
| 2 x | Female connector for 6 pines AWG |
| 1 x | Male connector for 6 pines AWG |
| 2 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | TP/TopFuel - XH 2/3S Adapter |
| 1 x | TrainerCord (master-learner) |
| 3 x | 30 cm BEC cable (female) |
| 1 x | Female connector JST SH 1.0mm with 10 cm wire |
| 4 x | USB Interface REVOLECTRIX for CellPRO 10s |
| 1 x | Interruptor RX/Batterie |
| 2 x | Cabel charger transmitter GRAUPNER |
| 1 x | Tank gas KUZA 260 cc |
| 2 x | Connector Sub-D 2+5 Female |
| 1 x | Crystal Universal RX 35.090 Ch 69 |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Aceite DELUXE turbine Jet Oil 1 litro |
| 2 x | MAX BEC |
| 1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
| 1 x | Spinner INO 82 mm Chrome (Imitacion metal) |
| 1 x | Xplorer3 anemometro |
| 1 x | Spinner Alumin. propeller pleg. 30 mm / 4,0 mm |
| 1 x | Cono NUT 5/16"x 24 -M4 |
| 2 x | Adapter lead MPX/XT60 |
| 1 x | DYNAMOMETER S-1580 |
| 1 x | Crystal Universal RX 35.140 Ch 74 |
| 1 x | EDGE 540 1.73m SEAGULL Model |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Copier 2x20 cm pcs |
| 1 x | Crystal Universal RX 35.040 Ch 64 |
| 2 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | DLE Ignition unit |
| 1 x | Crystal Universal RX 35.170 Ch 77 |
| 2 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | SPARK Switch 12v |
| 1 x | SBEC Jeti |
| 1 x | Spinner Alumin. fixed propeller 45 mm / 6,0 mm |
| 1 x | AC-10 pre-rotacion with motor |
| 1 x | Magnetic Interruptor MULTIPLEX |
| 1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
| 1 x | SPARK Switch 5.9v |
| 1 x | Spinner Alumin. fixed propeller 50 mm / 4,0 mm |
| 1 x | Spinner INO 75 mm Chrome (Imitacion metal) |
| 1 x | Ball link Aluminio M3 (2 pcs) |
| 1 x | White smoke bombs AX-60 (5 pcs) |
| 1 x | Screwdriver for Hexagon 1,27mm |
| 1 x | Screwdriver for Torx® TX8 |
| 1 x | A60-6XS V4 28-Pole |
| 1 x | A60 Motor Mount Alu complete set |
| 1 x | JETImodel Addcap 1640 |
| 1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
| 1 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
| 1 x | Motor A50-12 L Glider |
| 1 x | Hacker A30-S Radial Set |
| 1 x | A50 Backmountset complete |
| 1 x | TopFuel LiPo 20C-ECO-X 5000mAh 5S MTAG |
| 1 x | SAVOX SH 0255 MG servo |
| 1 x | Transmitter Cadet 4Ch (V3) 2,4 GHz Mod.2 |
| 1 x | Program Card G2 RAY |
| 1 x | Esc MasterSPIN 100 Pro |
| 1 x | Tool for entel |
| 1 x | Ball Bearings for motor A60-V2 |
| 1 x | Xoar Electric Beechwood Prop 21x10 |
| 1 x | Motor A30-10 XL V4 |
| 1 x | TopFuel LiPo 25C-ECO-X 1800mAh 2S |
| 1 x | LiPo TopFuel ECO-X 5000 mAh 3s 20C MTAG |
| 1 x | TopFuel LiPo 35C-ECO-X 2400mAh 2S MTAG |
| 1 x | TopFuel LiPo RX 25C-ECO-X 800mAh 2S |
| 1 x | Balsa panel 10x100x1000 mm |
| 1 x | Birch plywood plate 600x300x1.2 mm |
| 1 x | SPS 70V 100/200 A |
| 1 x | Swashplate metal LAMA |
| 2 x | Interruptor SPS 70v 60/120A |
| 3 x | wing/fuselage connector for 16 pines AWG 20-24 |
| 1 x | CC 02 |
| 2 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Race 600 |
| 1 x | Shaft for A60-XS-V2 (112,5mm) |
| 1 x | DUPLEX 2.4EX RC Switch |
| 1 x | Propadapter for motor A60-V2 |
| 1 x | Screwdriver for Torx® TX6 |
| 1 x | Battery charging cable XT60 |
| 1 x | JETImodel Addcap 820 |
| 1 x | Cable adapter iCharger |
| 1 x | Battery LiFe TopFuel 3100 mAh 2s MTAG 30C |
| 1 x | Screwdriver for Hexagon 1,5mm |
| 1 x | FesEx-Uni8 System |
| 1 x | Fan for A60 |
| 1 x | Shaft for A60-20/22/24S (120 mm) |
| 1 x | TP/TopFuel - JST-EH 4/5S Adapter |
| 1 x | Esc MasterBasic 70SB |
| 1 x | Motor B40-10 L |
| 1 x | Motor B50-9L Competition + 6,7:1 |
| 1 x | TopFuel LiPo 25C-ECO-X 1300mAh 2S |
| 1 x | LiPo TopFuel Power-X 4000 mAh 2s 35C MTAG |
| 1 x | Esc X-40-SB-Pro |
| 1 x | LiPo TopFuel ECO-X 2400mAh 4s 35C MTAG |
| 1 x | LiPo TopFuel ECO-X 3800mAh 3s 20C MTAG |
| 1 x | Motor B50-10L Competition + 6,7:1 |
| 1 x | Q80-8M V2 |
| 1 x | TopFuel LiPo 35C-ECO-X 7500mAh 6S MTAG |
| 1 x | Q80-13S 20-Pole F3A |
| 1 x | Esc MasterSPIN 80 Pro |
| 1 x | Motor A50-14 L 8-Polos Electric turbine |
| 1 x | A50 Backmountset complete V3/V4 |
| 1 x | Esc MasterBasic 40SB |
| 1 x | FOXY G2 C3530-700 |
| 1 x | Motor B50-12 XL |
| 1 x | TopFuel LiPo 25C-ECO-X 900mAh 2S |
| 1 x | Lipo RAY 2200 mAh 2s 7.4v 30C |
| 1 x | Motor A50-16 S V4 |
| 1 x | Receiver DUPLEX REX 3 2.4 GHz |
| 1 x | TopFuel LiPo 25C-ECO-X 350mAh 2S |
| 1 x | LiPo TopFuel ECO-X 3000 mAh 3s 20C MTAG |
| 1 x | ESC RAY G2 R-20B BEC |
| 1 x | Motor A40-14 L 14-Pole V4 |
| 1 x | LiPo TopFuel ECO-X 5000 mAh 4s 35C MTAG |
| 1 x | Motor A60-5XS V4 28-pole kv420 |
| 1 x | Motor A20-6 XL 10-Pole EVO + 4,4:1 |
| 1 x | TopFuel LiPo 20C-ECO-X 4500mAh 6S MTAG |
| 1 x | Motor B40 10L + MAXON 4,4:1 Keramik |
| 1 x | Esc X-70-SB-Pro 2-6S |
| 1 x | Propadapter for motor A50-V3 |
| 1 x | Esc X-70-OPTO-Pro |
| 1 x | Motor A50-12 L V4 |
| 1 x | Esc MasterSPIN 66 Pro |
| 1 x | Para-RC Trike "RC-Bullix" |
| 1 x | LiPo TopFuel ECO-X 3800mAh 4s 35C MTAG |
| 1 x | VAGABOND 1500 mm ARF V2 (Blue) |
| 1 x | LiPo TopFuel ECO-X 3000 mAh 2s 20C MTAG |
| 1 x | Motor A30-12 XL Glider |
| 1 x | Motor B20-18 L + 4:1 gearbox |
| 1 x | Receiver DUPLEX R9 EX 2.4 GHz |
| 1 x | VAGABOND 1500 mm ARF V2 (Red) |
| 1 x | Esc X-75-OPTO-Pro |
| 1 x | TopFuel LiPo 20C-ECO-X 5800mAh 6S |
| 1 x | Esc X-55-SB-Pro |
| 1 x | TopFuel LiPo 20C-ECO-X 5000mAh 2S MTAG |
| 1 x | SE Ring 480 mm (2 pcs) |
| 1 x | Q80-11S 28-Pole F3A |
| 1 x | A50 Backmountset complete |
| 1 x | Inlet lip (carbon) Stream-Fan 110 mm |
| 1 x | Esc X-30-Pro BEC |
| 1 x | Motor A200-6 |
| 1 x | Motor A30-12 L V4 |
| 1 x | LiPo TopFuel ECO-X 2000mAh 2s RX |
| 1 x | TopFuel LiPo 20C-ECO-X 5000mAh 6S |
| 1 x | Esc MasterSPIN 75 Pro OPTO |
| 1 x | Motor B50-14 S |
| 1 x | A30-M/L/XL Backmountset complete |
| 1 x | Servo DITEX TD2612S |
| 1 x | Planetary Gear 3,7:1incl. mountingadapter, pinion |
| 1 x | Motor A60-7XS V4 28-pole kv330 |
| 1 x | Harness for transmitter JETI DUPLEX |
| 1 x | JETI Counter for DC-16 (Blue) |
| 1 x | LiPo TopFuel ECO-X 5800mAh 2s 20C MTAG |
| 1 x | Esc MasterSPIN 70 Pro OPTO |
| 1 x | Xoar Electric Beechwood Prop 22x10 |
| 1 x | Esc master MEZON 120 Lite |
| 1 x | Motor A50-10L Turnado V3 Glider |
| 1 x | TopFuel LiPo 20C-ECO-X 5000mAh 3S MTAG |
| 1 x | PROFI Box JETI |
| 1 x | TopFuel LiPo 20C-ECO-X 2400mAh 2S MTAG |
| 1 x | Motor B20-10 L + 4:1 gearbox |
| 1 x | Xoar Electric Beechwood Prop 24x8 |
| 1 x | TopFuel LiPo 25C-ECO-X 1800mAh 3S |
| 1 x | SE Ring 240 mm (2 pcs) |
| 1 x | LiPo TopFuel ECO-X 5000 mAh 2s 35C MTAG |
| 1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
| 1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
| 2 x | Opto Gas Engine Kill Switch |
| 1 x | Lite Plywood panel 600x300x3.0 mm |
| 1 x | 3-blades 20x12 carbon prop Super Silence |
| 1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
| 1 x | 1,6x1000 mm 2:1 red termoretract tube |
| 1 x | Regulador Jeti Jes 045 |
| 1 x | PSC 6 |
| 1 x | PowerBox SparkSwitch RS |
| 1 x | Extension 2/3 lipos JST/C |
| 1 x | MAX BEC 2D plus EX |
| 1 x | UBEC 6A KAVAN |
| 1 x | Balsa panel 4.0x100x1000 mm |
| 1 x | USB interface ALTIS |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | 3-blades 28x12 carbon prop Super Silence |
| 1 x | 24x10 prop Super Silence |
| 1 x | 3-blades 24x12 carbon prop Super Silence |
| 1 x | Switching module high voltage SXH |
| 1 x | SBEC 40 |
| 1 x | Helice FOXY 22x10 2-Bl |
| 1 x | Ferrita con funda |
| 1 x | wing/fuselage connector for 12 pines AWG 20-24 |
| 1 x | Propeller FOXY 34x12 2-Bl |
| 1 x | CC 05 |
| 1 x | SBEC 30 D |
| 1 x | JETImodel DPS 40 |
| 1 x | MPS Gas-Cap-Powerswitch |
| 1 x | Bec MR UBEC 5A (5v/6v/7v) |
| 1 x | Propeller G-Sonic 20x8 |
| 1 x | wing/fuselage connector for 3 pines AWG 20-24 |
 |
| 21,048.74EUR |
