| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 2 x | Round Rod 3,0x1000 mm |
| 1 x | Liston HAYA 3 x 10 x 1000 mm |
| 1 x | Strip 1,5x1,5x330 mm |
| 1 x | Round Rod 2,5x1000 mm |
| 2 x | ABS Strip 1.0x4.0x1000 mm |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | Beech dowels 4.0 x 1000 mm |
| 2 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 2 x | ABS Strip 1.0x5.0x1000 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Round Rod 1,5x1000 mm |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 1 x | Strip 2,5x1,25x330 mm |
| 1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
| 1 x | ABS Strip 1.5x2.0x1000 mm |
| 1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 2 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | Liston HAYA 10 x 10 x 1000 mm |
| 1 x | Beech dowels 2.0 x 1000 mm |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | BALSA trip 5.0x5.0x1000 mm |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | Round Rod 1,0x1000 mm |
| 1 x | Canopy Latch |
| 1 x | Beech dowels 10 mm x 1000 mm |
| 1 x | ABS I Strip 20x10x1000 mm |
| 1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
| 1 x | Linden wood slat 3.0x3.0x1000 mm |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | Linden wood slat 2.0x2.0x1000 mm |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | Strip ABS 2.0x5.0x1000 mm |
| 2 x | SUS wire 3m (nylon coated) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | ABS Strip 1.0x2.0x1000 mm |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Electric spoiler 250 mm (2 pcs) |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | BALSA trip 3.0x3.0x1000 mm |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm |
| 1 x | OBECHI sheet 2.0x3.0x1000 mm |
| 1 x | Round Rod 2,0x1000 mm |
| 1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | ABS Strip 1.0x3.0x1000 mm |
| 1 x | BALSA trip 4.0x4.0x1000 mm |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave) |
| 1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 2 x | Carbon roving DowAksa / 24k / 1600 tex |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 2 x | Round Rod 6,0x1000 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 2 x | ABS Strip 1.5x3.0x1000 mm |
| 2 x | Beech dowels 3.0 x 1000 mm |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | Strip 3,5x1,75x330 mm |
| 1 x | BALSA trip 2.0x10.0x1000 mm |
| 1 x | Cierre cabina aluminio Ø4, I=10 mm |
| 1 x | Canopy Lock V1 M3 Blue (2 pcs) |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 2 x | ABS "T" angle 10.0x10.0x1000 mm |
| 1 x | Profile ABS Square 4 x 1000 mm |
| 1 x | ABS angle 1.5x1.5x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
| 1 x | ABS angle 4,0x4,0x1000 mm |
| 2 x | ABS angle 3,0x3,0x1000 mm |
| 1 x | ABS angle 2,0x2,0x1000 mm |
| 1 x | Profile ABS half cane 3x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
| 1 x | Flat Connector 4.0 mm x 1000 mm |
| 1 x | T-Connector 4.0 mm x 1000 mm |
| 1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
| 1 x | Profile ABS half cane 2.5x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
| 1 x | L-Connector 1.5 mm x 1000 mm |
| 1 x | U Profile ABS 1,0x2,0x1000 mm |
| 1 x | Cross Connector 4.0 mm x 1000 mm |
| 1 x | U Profile ABS 5,0x10,0x1000 mm |
| 1 x | Foil for sticking flaps and ailerons |
| 1 x | Sandwich carbon + poplar 3mm + carbon 480x290 mm |
| 1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
| 1 x | 20x1000 mm Ring Strap Back To Back |
| 1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
| 1 x | SE Ring HACKER 300 mm (2 pcs) |
| 1 x | Tape GFK 25 mm |
| 2 x | Xplorer3 anemometro |
| 1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | 5 LiPo XH>EH adapter |
| 1 x | 30 cm BEC cable (female) |
| 1 x | USB HLS prog. interface |
| 1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
| 1 x | CM-3 |
| 1 x | TP/TopFuel - XH 2/3S Adapter |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | TrainerCord (master-learner) |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | 30 cm BEC cable (male) |
| 1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
| 1 x | Bec MR UBEC 5A (5v/6v/7v) |
| 1 x | Adapter lead MPX/EC3 |
| 1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | Cabel charger transmitter GRAUPNER |
| 1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | Circlick securite |
| 1 x | JETImodel SINGLE BEC |
| 1 x | Ply-Span 450x600/13g White |
| 1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
| 1 x | Aluminium wide washer M3 gold (4 pcs) |
| 1 x | SlowFlyer control horn (3 pcs) |
| 1 x | Dust collector for mould cleaning |
| 1 x | Ball Link Plier |
| 2 x | 28x5 mm wires output (2 pcs) |
| 2 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | 100 mm rods + T patellas set for direction control |
| 1 x | Chopped glass fibre strands 3 mm |
| 1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
| 1 x | Split M1,2x10 (10 pcs) |
| 1 x | 80 mm rods set for direction control |
| 1 x | 45 mm rods + T patellas set for direction control |
| 1 x | Snap short M2 (10 uds) |
| 1 x | Glass fabric 49 g/m² (1,27 x 5 m) |
| 1 x | Wing bolts M6 Steel screw Red (2 pcs) |
| 1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
| 1 x | Fiberglass plate 350x150x1.0 mm |
| 1 x | Cable tie mounts 4.3 (4 uds) |
| 1 x | Balsa panel 5.0x100x1000 mm |
| 1 x | Foam plastic plates (310x210x8 mm) |
| 1 x | Strip ABS 2.0x8.0x1000 mm |
| 1 x | 11 mm Rubber pads (14 pcs) |
| 1 x | Carbon plate 550x350x3.0 mm ECOTECH |
| 1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
| 1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
| 1 x | Carbon plate 550x350x4.0 mm ECOTECH |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
| 1 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | Steering arm 16 mm Ø 3 mm (2 uds) |
| 1 x | ABS "T" angle 8.0x8.0x1000 mm |
| 1 x | Rubber profile 8-2 mm 2M |
| 1 x | Styrene plate 320x120x0.5 mm |
| 1 x | Wheel collar 5 mm Ø (4 uds) |
| 1 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
| 1 x | ABS rectangular profile 10x5.0x1000 mm |
| 1 x | Sun Cover ULTIMATUM 2.0 (Hispano Aviacion) |
| 1 x | Rubber profile 10-2 mm 2M |
| 1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
| 1 x | Rubber profile 6-2 mm 2M |
| 1 x | ABS Strip 1.5x4.0x1000 mm |
| 1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
| 2 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
| 1 x | Profile ABS half cane 7.0x1000 mm |
| 1 x | Wheel collar 4 mm Ø (4 uds) |
| 1 x | 120x60 mm SLH KOVO wheel |
| 2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 1 x | Wheel collar 3.5 mm Ø (4 uds) |
| 1 x | Wheel collar 3 mm Ø (4 uds) |
| 1 x | ABS I Strip 10x5x1000 mm |
| 1 x | Covered closure or fairings |
| 1 x | L cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Micro Switch button |
| 1 x | Extension MPX-MPX 20 cm |
| 1 x | Locking cable tie 3.2x142 (uds) |
| 1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Propeller POWER-PROP 7x7 |
| 1 x | Tubo espiral FESTO 6x1 Black |
| 1 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 1 x | ABS Strip 1.5x6.0x1000 mm |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | Servo GO-12S70MG 20.5kg.cm 0.06s/60º |
| 1 x | Hexagonal Nut M2 (10 pcs) |
| 1 x | Flat washer 4.3 mm (20 pcs) |
| 1 x | Servo GO-1053 MG 20.0kg |
| 1 x | Savox Brushless Servo SC-1267 SG |
| 1 x | Servo GO-12S69MG 26kg.cm 0.10s/60º |
| 1 x | Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox |
| 1 x | Horizontal mounting servo holder |
| 1 x | Futaba 25 mm servo arm with M3 ball link |
| 1 x | Hitec 20 mm servo arm |
| 1 x | Servo SAVOX SH 0257 MG |
| 1 x | Futaba 2x20 mm servo double arm |
| 1 x | Hobbylite Filler, Balsa colour |
| 1 x | Plasti Dip Liquid Tape 429 ml black |
| 1 x | Universal Colour Paste deep black 250 g |
| 1 x | PARTALL® Hi-Temp Wax, 340 g |
| 1 x | Solvent Plasti Dip 1000 ml |
| 1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
| 1 x | Blind nut M6 (4 pcs) |
| 1 x | Socket Screw M3x9 mm |
| 1 x | Lock washer 3.2 mm (20 pcs) |
| 1 x | Simulador RealFlight RF-9.5 S (sin emisora) |
| 1 x | Tapping Screw M2.2x9.5 (10 pcs) |
| 1 x | Tapping Screw M2.9x9.5 (10 pcs) |
| 1 x | Blind nut M5 (4 pcs) |
| 1 x | Pan Head Screw M2x8 PH |
| 1 x | Socket Screw M2x3 mm (4 pcs) |
| 1 x | Screw M2.5x10 (10 pcs) |
| 1 x | Tapping Screw M2.2x13 (10 pcs) |
| 1 x | Joint with bearing M3 22x5,5 |
| 1 x | M2 5Diam short black ball link V2 (2 pcs) |
| 1 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
| 1 x | Ball link M3 (10 pcs) |
| 1 x | Brazo Servo XTorque 52 mm HITEC 25T-6 |
| 1 x | Servoarm Aluminium SH-82 |
| 1 x | Servo SAVOX SA-1258 TG |
| 1 x | Servo GO-09 9g |
| 1 x | Servo GO-1081 MG 45 kg.cm 0.085s/60º |
| 1 x | Alu servo arm double RHINO |
| 1 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
| 1 x | Servo SAVOX SV-1260 MG |
| 1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
| 1 x | Servo GO-1017MG 4.5 kg.cm 0.10s/60º |
| 1 x | Servoarm SH-81, two sides, aluminium |
| 1 x | Xplorer1 anemometro |
| 1 x | Servo BLUE Bird BLS-H71B v2 |
| 1 x | Servo SAVOX SV-1261 MG |
| 1 x | Connector Sub-D 2+5 Female |
| 1 x | Switc electronic 30 Amp |
| 1 x | wing/fuselage connector for 16 pines AWG 20-24 |
| 1 x | 3 mm Short Prop Adapter M5 |
| 1 x | CC 02 |
| 1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
| 1 x | Allen wheel collar M3x5 |
 |
| 7,319.93EUR |
