| 1 x | MG cannon 1.8 cm (5 pcs) |
| 1 x | SCHARNHORST accessories |
| 1 x | Dumper propeller 6/8 mm |
| 1 x | 3.2 mm Prop Adapter M6 |
| 1 x | 2.3 mm Adapter for 30 mm spinners |
| 1 x | Prop Shaft Adapter 5 mm/M8 "long" |
| 1 x | Aero-Master Fuselage (Aero-naut) |
| 1 x | 4 mm Prop Adapter CN-Spinner |
| 1 x | 3,2 mm Prop Adapter M6 |
| 1 x | 3.17 mm Prop Adapter CN-Spinner |
| 1 x | La Capitania di Venetia accesories |
| 1 x | 6 mm Prop Adapter M8 |
| 1 x | Prop Shaft Adapter 6 mm/M8 "long" 35 mm |
| 1 x | 3.2 mm Prop Adapter M8 |
| 1 x | 6 mm Prop Adapter M8 |
| 1 x | Tirpiz Battleship 1:200 |
| 1 x | 2,3 mm Prop Adapter M6 |
| 1 x | Aero-Master (Aero-naut) |
| 1 x | 5 mm Prop Adapter M6 |
| 1 x | 10 mm Prop Adapter M12 |
| 1 x | 5 mm Prop Adapter M8 |
| 1 x | Alfileres de cobre 0,7 x 7 mm, aprox.50 g |
| 1 x | ABS angle 3,0x3,0x1000 mm |
| 1 x | ABS "T" angle 4.0x4.0x1000 mm |
| 1 x | Profile ABS Square 3 x 1000 mm |
| 1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
| 1 x | ABS angle 10,0x10,0x1000 mm |
| 2 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
| 1 x | ABS "T" angle 2.0x2.0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
| 1 x | ABS angle 5,0x5,0x1000 mm |
| 1 x | ABS "T" angle 10.0x10.0x1000 mm |
| 1 x | Profile ABS half cane 2.5x1000 mm |
| 1 x | Profile ABS Square 1 x 1000 mm |
| 2 x | Flat Connector 4.0 mm x 1000 mm |
| 2 x | U Profile ABS 1,0x2,0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
| 1 x | T-Connector 4.0 mm x 1000 mm |
| 1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
| 1 x | L-Connector 4.0 mm x 1000 mm |
| 1 x | ABS angle 6,0x6,0x1000 mm |
| 1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
| 1 x | L-Connector 1.5 mm x 1000 mm |
| 1 x | Cross Connector 4.0 mm x 1000 mm |
| 1 x | Connectors banna oro 6,0 mm (M/F) |
| 1 x | Gold antispark 5,5 mm plug |
| 1 x | XH female balance (3S) connector (2 pcs) |
| 1 x | 30 cm DEANS female connector |
| 1 x | Connectors banna oro 0,8 mm (M/F) |
| 1 x | Conector BEC female (10 pcs) |
| 2 x | Connectors DEANS (T) |
| 1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
| 1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
| 1 x | XH male balance (4S) connector (2 pcs) |
| 2 x | Connectors banna oro 3,5 mm (M/F) |
| 2 x | 3 LiPo XH>EH adapter |
| 2 x | USB HLS prog. interface |
| 1 x | 5 LiPo XH>EH adapter |
| 2 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
| 1 x | 4 LiPo XH>EH adapter |
| 1 x | CC 02 |
| 1 x | BEC 3A FOXY |
| 2 x | Cabel charger transmitter GRAUPNER |
| 1 x | Dean "T" - Futaba Adapter |
| 3 x | "Y" charging 4mm wire (2 IN-1 OUT). |
| 1 x | JETImodel SINGLE BEC |
| 1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | MPX-Dean "T" Adapter |
| 1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
| 1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
| 1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
| 1 x | Copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | CC 01 |
| 2 x | Adapter lead MPX/EC3 |
| 2 x | CM-3 |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | Adapter lead MPX/XT60 |
| 1 x | CC 03 |
| 1 x | 30 cm BEC cable (male) |
| 1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
| 1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 1 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 1 x | Flap hinge (6 pcs) |
| 1 x | Pin type hinge Al 6x98 mm (2 pcs) |
| 1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
| 1 x | Gates hinge black 30x16 mm (2 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
| 1 x | 25 mm reinforced hinge |
| 1 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | Flap hinge 33x9 mm (6 pcs) |
| 1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Micro flex hinge (12 uds) |
| 1 x | 15 mm reinforced hinge |
| 1 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | Gates hinge |
| 1 x | Gates hinge aluminium (1 pcs) |
| 1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | Long pinned hinge (12 uds) |
| 1 x | Small pinned hinge (12 uds) |
| 1 x | Miniature brass strap hinge, 1 m |
| 1 x | Fast'n EZ-CA-Hinge (12 uds) |
| 2 x | Large flex hinge (12 uds) |
| 1 x | Long pinned hinge (6 uds) |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
| 1 x | 20x1000 mm Ring Strap Back To Back |
| 1 x | Ring 320 mm length (5 pcs) |
| 1 x | SE Ring HACKER 300 mm (2 pcs) |
| 1 x | SE Ring 480 mm (2 pcs) |
| 1 x | Marker ties (20 pcs) |
| 1 x | 20x200 mm battery rings |
| 2 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | SE Ring 330 mm (4 pcs) |
| 1 x | Remote electric ignition system |
| 1 x | Oracover Azul Cielo 2 m |
| 1 x | ABS tube 3.0x1.0x1000 mm |
| 1 x | ABS tube 3.0x2.0x330 mm |
| 1 x | Horn 20x28,5 mm (2 pcs) |
| 1 x | Anchor 25 mm (2 uds) |
| 1 x | 4 mm Prop Adapter M6 |
| 1 x | Low line 74 mm |
| 1 x | Spinner propeller pleg. 40 mm / 2,0 mm |
| 1 x | Servo Digital HITEC HS-5065 MG |
| 1 x | SERVO DES 568 MG |
| 1 x | Servo Robbe FS 128 BB MG HV Digital |
| 1 x | Servo Tester |
| 1 x | Servo inverter |
| 1 x | PS-050 TONEGAWA Servo |
| 1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
| 1 x | Gold aluminium servo arm V2-JR 1,0" inch M3 |
| 1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
| 1 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
| 1 x | Blue aluminium servo arm V3-Hitec 1,25inch M3 |
| 1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
| 1 x | Servo MKS HV6130 |
| 1 x | U Profile ABS 8,0x4,0x1000 mm |
| 1 x | Servo MKS HV747 |
| 1 x | L-Connector 1.0 mm x 1000 mm |
| 1 x | U Profile ABS 3,0x6,0x1000 mm |
| 1 x | Profile ABS triangular 4.0x1000 mm 90º |
| 1 x | Servo MKS HV1220 |
| 1 x | 3 mm Long Prop Adapter M5 |
| 1 x | Profile ABS triangular 2.0x1000 mm 90º |
| 1 x | 5 mm Prop Adapter CN-Spinner |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Foil for sticking flaps and ailerons |
| 1 x | Extension 2/3 lipos JST/C |
| 1 x | SPARK Switch 12v |
| 1 x | Male Prolonger TP 4/5S |
| 1 x | Mounting frame MPX female connector |
| 1 x | PowerBox SparkSwitch RS |
| 2 x | SBEC Jeti |
| 1 x | PIN Connector female (100 pcs) |
| 1 x | MPX screwable clips (4 pcs) |
| 1 x | Conector male bateria 1s Kavan/Walkera 10cm cable |
| 1 x | TrainerCord (master-learner) |
| 1 x | Prolonguer for Balancer Thunder Power 6S |
| 1 x | Male/Female prolonguer for Balancer Thunder Power 6S |
| 1 x | Conector Servo female 4 pines |
| 1 x | Three-position switched channel, short |
| 1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
| 1 x | Pins M connect Multipin connectors AWG 20-24 |
| 1 x | Kontronik connector (10 connectors, 5 pairs) |
| 1 x | SPS 70V 140/280 A |
| 1 x | TP/TopFuel - XH 2/3S Adapter |
| 1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
| 1 x | USB interface ALTIS |
| 1 x | MPX housing with flange (4 pcs) |
| 1 x | Conector JAPAN G2 Set 5 pares |
| 1 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
| 1 x | Glases Nimbus "Black" |
| 1 x | Servo HITEC HS-65 MG |
| 1 x | Ciano KAVAN Thick 20g |
| 1 x | Servo lock HS-80/81/82/85 (2 pcs) |
| 1 x | Servo HITEC HS-85 BB |
| 1 x | 30 cm MULTIPLEX female connector |
| 1 x | Conector JR Servo male (10 pcs) |
| 1 x | Connector Sub-D 2+5 Female |
| 1 x | Connector Sub-D 2+5 Male |
| 1 x | Conector JR Servo female (10 pcs) |
| 1 x | Connectors banna oro 3 mm (M/F) |
| 1 x | Connectors MPX male |
| 1 x | Conector JR Servo female (10 pcs) |
| 1 x | SPARK Switch 7.4v |
| 1 x | DPSI Ampere battery backer |
| 1 x | Connectors MPX male (PIN double) |
| 1 x | SPS Remote switch actuator |
| 1 x | SPS 70V 100/200 A |
| 1 x | 30 cm BEC cable (female) |
| 2 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
| 1 x | Female connector JST SH 1.0mm with 10 cm wire |
| 1 x | Opto Gas Engine Kill Switch |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | wing/fuselage connector for 12 pines AWG 20-24 |
| 1 x | MPX PCB "Gender-Changer (5 pcs) |
| 1 x | 2 LiPo XH>EH adapter |
 |
| 4,186.08EUR |
