| 1 x | Motor MVVS 5.6/690 GLIDER |
| 1 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
| 1 x | Aluminium cap bolt washer M3 green (8 pcs) |
| 1 x | AXI 2820/12 V2 |
| 1 x | 1/10 Pilot "Jimmy" |
| 1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
| 1 x | Rocket D3-P |
| 1 x | Lock washer 2.7 mm (20 pcs) |
| 1 x | AXI 2217/20 V2 Long "F5J" |
| 1 x | ABS Strip 1.5x4.0x1000 mm |
| 1 x | Round Rod 1,0x1000 mm |
| 1 x | Green smoke canister 100 g |
| 1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
| 1 x | Spray adhesive AEROFIX 2 |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
| 1 x | Universal Colour Paste white 50 g |
| 1 x | APM2.6 Power module with 5.3V DC BEC |
| 1 x | BALSA trip 8.0x8.0x1000 mm |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
| 1 x | Disposable Injector Bags (30x16cm) 100 pcs |
| 1 x | Conector MR-60 (pareja) |
| 1 x | Tape GFK 25 mm |
| 1 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
| 1 x | Motor B20-10 L + 4:1 gearbox |
| 1 x | Backmountset complete A40 |
| 1 x | Fast'n EZ-CA-Hinge (12 uds) |
| 1 x | Motor A60-6XS V4 28-pole kv370 |
| 1 x | Motor A50-12 L Glider |
| 1 x | Shaft for A60-XS-V2 (112,5mm) |
| 1 x | FesEx-Uni6 System |
| 1 x | Axle for motor A20-S (3 uds) |
| 1 x | Flap hinge (6 pcs) |
| 1 x | Motor MVVS 2.0/1120 |
| 1 x | 1/6 Pilot "John" |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
| 1 x | Civilian pilot "Curt" size 9cm (Slimline) |
| 1 x | Rocket cardboard tube 25mm x 24mm x 230mm |
| 1 x | AXI 2826/6 V2 |
| 1 x | Pilot "Anthony" (Slimline) |
| 1 x | Flat washer 3.2 mm (20 pcs) |
| 1 x | Quicklock washer 2.5 mm (10 pcs) |
| 1 x | Pilot JAN 1/4 Saiplanes |
| 1 x | ABS Strip 1.0x5.0x1000 mm |
| 1 x | ABS Strip 1.5x6.0x1000 mm |
| 1 x | ABS I Strip 20x10x1000 mm |
| 1 x | Round Rod 6,0x1000 mm |
| 1 x | ABS Strip 1.5x8.0x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 1 x | Ball Link ALU M3 - RH (1 pcs) |
| 1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
| 1 x | Surface Indicator Gauge Small |
| 1 x | Universal Colour Paste deep black 50 g |
| 1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 1 x | Brass ball links BS M3 V1 (10 pcs) |
| 1 x | Optical RPM Sensor |
| 1 x | Red smoke bombs AX-60 (5 pcs) |
| 1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
| 1 x | Angled clevis with threaded rod M3 |
| 1 x | Spray YELLOW Inca Lexan 150ml |
| 1 x | Smoke set "S" |
| 1 x | Field folding model stand |
| 1 x | Brass control horn M3 short for wire (2 pcs) |
| 1 x | 6 mm M3 variable horn |
| 1 x | DPSI Ampere battery backer |
| 1 x | 140 mm rods set for direction control |
| 1 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
| 1 x | SE Ring 240 mm (2 pcs) |
| 1 x | Motor mount M |
| 1 x | BETA 1400 ARF Red |
| 1 x | Motor A40-10S V4 14-Pole |
| 1 x | Electric coversion set |
| 1 x | Pin hinge 34x16 mm (10 uds) |
| 1 x | Motor A200-6 |
| 1 x | Motor A40-10 L V2 14-Pole Glider |
| 1 x | |
| 1 x | Motor mount for 1200 mm models |
| 1 x | Cables suitable for the motor AC 28/7 |
| 1 x | Motor A30-12 XL Glider |
| 1 x | Glow starter with charger 230v |
| 1 x | M3 black washers (4 pcs) |
| 1 x | 25 mm reinforced hinge |
| 1 x | Aluminium wide washer M3 red (4 pcs) |
| 1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | AXI 2814/16 V2 |
| 2 x | 1/4 Pilot "Mike" |
| 1 x | AXI 2814/12 V2 Long |
| 1 x | Flat washer 1.7 mm (20 pcs) |
| 1 x | Gates hinge black 30x16 mm (2 pcs) |
| 1 x | AXI 2820/10 V2 Long |
| 1 x | Quicklock washer 3 mm (10 pcs) |
| 1 x | AXI 2826/12 V2 Long |
| 1 x | Pin type hinge Al 6x98 mm (2 pcs) |
| 1 x | AXI 2826/10 V2 |
| 1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Axi for MVVS 3.5 Sport |
| 1 x | AXI 2808/24 V2 |
| 1 x | Lock washer 4.3 mm (20 pcs) |
| 1 x | Quicklock washer 3.5 mm (10 pcs) |
| 1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
| 1 x | Lock washer 2.2 mm (20 pcs) |
| 1 x | M3-M4 rubber washer (8 pcs) |
| 1 x | Spring lock washer 2.1 mm (20 pcs) |
| 1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
| 1 x | 1/6 Pilot "Buddy" |
| 1 x | Aluminium wide washer M4 Blue (4 pcs) |
| 1 x | AXI 2820/14 V2 Long |
| 1 x | AXI 2217/16 V2 |
| 1 x | AXI 2826/10 V2 Long |
| 1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
| 1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
| 1 x | 5.8G Receiver Helical Antenna with protecting case (SMA plug) 12 |
| 1 x | Strip ABS 2.0x5.0x1000 mm |
| 1 x | Strip ABS 2.0x10.0x1000 mm |
| 1 x | ABS Strip 1.5x2.0x1000 mm |
| 1 x | Round Rod 2,0x1000 mm |
| 1 x | ABS Strip 1.0x4.0x1000 mm |
| 1 x | Round Rod 3,0x1000 mm |
| 1 x | ABS Strip 1.5x3.0x1000 mm |
| 1 x | Round Rod 4,0x1000 mm |
| 1 x | Strip ABS 2.0x8.0x1000 mm |
| 1 x | ABS I Strip 10x5x1000 mm |
| 1 x | Round Rod 1,5x1000 mm |
| 1 x | Strip 3,5x1,75x330 mm |
| 1 x | ABS Strip 1.0x3.0x1000 mm |
| 1 x | Round Rod 1,25x1000 mm |
| 1 x | Strip 2,5x1,25x330 mm |
| 1 x | Strip ABS 2.0x3.0x1000 mm |
| 1 x | ABS tube 5.0x4.0x1000 mm |
| 1 x | Slave-cable USB Easy Sim |
| 1 x | Initior Transmitter FTX2 Wireless |
| 1 x | ABS tube 7.0x6.0x1000 mm |
| 1 x | "M" set |
| 1 x | Truck-trailer for gliders 720 x 285 mm |
| 1 x | Blue smoke canister 100 g |
| 1 x | B4-0 rocket charges (6 pcs) |
| 1 x | PIX Hawk with accesories |
| 1 x | Red smoke canister 100 g |
| 1 x | Cable coupler M2 (10 uds) |
| 1 x | 1/10 Pilot "Jack" |
| 1 x | Straightened rod Ø 0.5 mm x 1000 mm |
| 1 x | Buy Perforated film 145 cm / 50 m |
| 1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
| 1 x | 115x29 mm (4.50") Type jets aluminium core wheel |
| 1 x | White smoke bombs AX-3 (10 pcs) |
| 1 x | |
| 1 x | White smoke canister 65 g |
| 1 x | GameCommander USB Universal |
| 1 x | Brass rod Ø 0.5 mm x 1000 mm |
| 1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
| 1 x | Truck-trailer for gliders 720 x 239 mm |
| 1 x | ABS 500 x 400 x 0,5 mm (white) |
| 1 x | Plastic caps for AIR BURTS (30 pcs) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | Angle of incidence meter |
| 1 x | Vasa model Catapult |
| 1 x | 102 mm INO spinner (carbon imitation) |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
| 1 x | Brass rod Ø 1.0 mm x 1000 mm |
| 1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
| 1 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
| 1 x | White smoke canister 100 g |
| 1 x | 500 ml sealer (DOPE) |
| 1 x | 127x43 Ø6.0 mm aluminium core wheel |
| 1 x | Spannlack 1000 ml |
| 1 x | ABS tube 8.0x7.0x1000 mm |
| 1 x | SIMtransmitter 6 Mode 2 |
| 1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
| 1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
| 1 x | Field folding model stand SebArt |
| 1 x | ABS tube 5.0x3.0x1000 mm |
| 1 x | Green smoke canister 140 g |
| 1 x | WingFix ULTRA Black Edition |
| 1 x | Remote electric ignition system |
| 1 x | Spray EC Red 400ml |
| 1 x | Towing hook <3m |
| 1 x | Towing hook |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | Digital Air Speed Sensor And Pitot Tube Set |
| 1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
| 1 x | Straightened threaded rod M2-1m |
| 1 x | Universal Colour Paste deep black 250 g |
| 1 x | Plasti Dip Liquid Tape 429 ml orange |
| 1 x | 280 cc gasoline fuel tank complet |
| 1 x | Cable coupler M3 (10 uds) |
| 1 x | ABS tube 9.0x8.0x1000 mm |
| 1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 1 x | 18m Fitting barb |
| 1 x | Parachutist |
| 1 x | Buy Perforated film 100 cm / 10 m |
| 1 x | 200 mm extensión servo HITEC/JR |
| 1 x | Glases Ace |
| 1 x | "Taxi Tank" Fuel Tank |
| 1 x | Straightened rod Ø 6.0 mm x 1000 mm |
| 1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
| 1 x | ABS tube 8.0x6.0x1000 mm |
| 1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
| 1 x | PCARD Wireless System |
| 1 x | 1,2x1000 mm 2:1 black termoretract tube |
| 1 x | Cut tube |
| 1 x | DPS Switch JR/JR |
| 1 x | Balsa panel 8.0x100x1000 mm |
| 1 x | |
| 1 x | SE Ring 250 mm (2 pcs) |
| 1 x | A/C economy plywood 600x300x6+.0 mm |
| 1 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 1 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
| 1 x | Soporte grifo FESTO vertical (1 pcs) |
| 1 x | Dust collector for mould cleaning |
| 1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
| 1 x | Motor OS 3805-1200 electric |
| 1 x | Oracover Azul Cielo 2 m |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | Fresa corte diamante Ø 2.35mm (flame) |
| 1 x | BALSA trip 10x10x1000 mm |
| 1 x | 100 mm rods set for direction control |
| 1 x | CM-3 |
| 1 x | BALSA triangular 8x8x1000 mm |
| 1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
| 1 x | Pasacables rectangular 40x15 mm (4 pcs) |
| 1 x | Crimping tool |
| 1 x | Tube support Ø 6mm (10 pcs) |
| 1 x | Support XT60 conector (2 pcs) |
| 1 x | Suncover 100cc Red |
| 1 x | Horn DUBRO 1/2A |
| 1 x | 45 mm rods set for direction control |
| 1 x | EC-Cutter |
| 1 x | 30 cm DEANS female connector |
| 1 x | Horn 16,5x20 mm (2 pcs) |
| 1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
| 1 x | Monokote PLATINO metalizado (1.8x0.65m) |
| 1 x | Digital scale up to 40 kg |
| 1 x | 4,8x1000 mm 2:1 black termoretract tube |
| 1 x | Horn for flap control (1 pcs) |
| 1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
| 1 x | Brass control horn M2 large for wire (2pcs) |
| 1 x | Balsa panel 3.0x100x1000 mm |
| 1 x | Connectors banna oro 2 mm (M/F) |
| 1 x | Ventus 1:4 set of instruments |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | 80 mm rods set for direction control |
| 1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | CC 01 |
| 1 x | Horn F3A de Titanium 16 mm (2 units) |
| 1 x | SE Ring HACKER 300 mm (2 pcs) |
| 1 x | Conector MT-60 (pair) |
| 1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
| 1 x | Soporte filtro FESTO (4 pcs) |
| 1 x | Tape GFK 50 mm |
| 1 x | A/C quality beech plywood 600x300x6.0 mm |
 |
| 9,638.64EUR |
