| 1 x | ABS tube 6.0x4.0x1000 mm |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
| 1 x | ABS tube 2.0x1.0x1000 mm |
| 1 x | ABS tube 10.0x8.0x1000 mm |
| 1 x | ABS tube 8.0x7.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
| 1 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | ABS tube 5.0x4.0x1000 mm |
| 1 x | ABS tube 9.0x8.0x1000 mm |
| 1 x | One touch canopy lock |
| 2 x | Steering arm 12 mm Ø 4 mm |
| 1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Cabin latch Fox MDM1 4m (pair) |
| 1 x | ABS tube 3.0x2.0x330 mm |
| 1 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 1 x | ABS tube 3.0x1.0x1000 mm |
| 1 x | Cap closure 33/23.5mm (2 uds) |
| 1 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 1 x | Steering arm 12 mm Ø 3 mm (2 uds) |
| 1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Canopy Lock V1 M3 Red (2 pcs) |
| 1 x | Aluminium alloy coupler for carbon tube 6/M4 |
| 1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
| 1 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | Covered closure or fairings |
| 1 x | ABS tube 4.0x2.0x1000 mm |
| 1 x | Cockpit plastic closing |
| 1 x | ABS tube 8.0x6.0x1000 mm |
| 1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
| 2 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
| 1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
| 1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | ABS tube 9.0x7.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
| 1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
| 1 x | ABS tube 4.0x3.0x1000 mm |
| 1 x | SUS wire 3m (nylon coated) |
| 1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
| 1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
| 1 x | Steering arm 16 mm Ø 3 mm |
| 1 x | Locking cable tie 2.5x100 (uds) |
| 3 x | Starter EM Gear Power 80 |
| 1 x | Extension MPX-MPX 20 cm |
| 1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
| 1 x | Adaptadores carga 6s JST-XH |
| 1 x | Z Bender - S Type Tool |
| 1 x | Screwdriver for Hexagon 1,27mm |
| 1 x | Crimping tool |
| 1 x | Ball Link Plier |
| 1 x | Digital precision scale up to 2000 g |
| 1 x | 3,0x60 mm allen screwdriver |
| 2 x | Starter Sullivan-STAR 601 |
| 1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
| 1 x | Starter 12v (Max 90 and 15ccm) |
| 2 x | Starter Sullivan-STAR 603 DINATRON |
| 1 x | Vacuum pump 12 CFM |
| 2 x | Hexagonal ball head 2.0 x 50 mm |
| 1 x | |
| 1 x | Vacuum pump P1-N |
| 1 x | Starter EM Gear Power 250 |
| 1 x | Z Bender - S Type Tool |
| 1 x | Glases Aspen |
| 1 x | Glases Ace |
| 2 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
| 1 x | Glases Stratus |
| 1 x | Glases Moritz |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
| 1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 2 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
| 1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
| 2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
| 2 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
| 1 x | Aluminium sheet 500x250x0,5mm |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 2 x | Buy Perforated film 100 cm / 20 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 2 x | Buy Perforated film 100 cm / 10 m |
| 2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | ABS "T" angle 6.0x6.0x1000 mm |
| 1 x | Cabel "Y" 30 cm (graupner) |
| 1 x | Flat washer 2.2 mm (20 pcs) |
| 1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
| 3 x | Waterproof adhesive tape, width 19mm, length 25m |
| 3 x | 20x200 mm battery rings |
| 1 x | CC 01 |
| 1 x | Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re |
| 1 x | DPSI magnetic switch actuator (PCB) |
| 1 x | Sun Cover PC 21 XXL (JMB Jets) |
| 1 x | GPS Sensor + Logger OPTronics |
| 1 x | Cierre cabina aluminio Ø5, I=16 mm |
| 1 x | Heli blades angle measurer |
| 1 x | PROXXON - SAW BLADE OZI/E, 65MM, 160 TOOTH |
| 1 x | Hot Glue Stick RED |
| 1 x | PROXXON - SAW BLADE 8MM 0ZI220E |
| 1 x | Mold plugs XT-30 |
| 1 x | Heli digital angle measurer |
| 2 x | Sealing Iron Sleeve PROF |
| 1 x | Llave dinamomterica 74 Z 0 0 21 |
| 1 x | PROXXON - TRIANGLE / DELTA SANDING MACHINE OZI/E |
| 2 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
| 1 x | Pistola termica MH 550 micro |
| 2 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
| 1 x | Smart Soldering Iron 110W/230V AC |
| 1 x | Latex Gloves GRIP, size L, box/ 100 pcs |
| 1 x | Rubber Insert hard, 1 Pcs. |
| 2 x | Fresa corte diamante Ø 2.7mm (bola) |
| 2 x | Schul-Malpinsel Gr.5 |
| 1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
| 1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
| 1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
| 1 x | Goma arrancador Ø36 mm x 30 mm |
| 2 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
| 1 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
| 1 x | Crimping tool |
| 1 x | Conector MR-60 (pareja) |
| 1 x | EXTRA NG 74" white/red/blue (Skywing RC) |
| 1 x | Servo SAVOX SV-1273 TG |
| 1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 1 x | Miniature brass strap hinge, 1 m |
| 1 x | Large flex hinge (12 uds) |
| 1 x | Piñones SAVOX SH-0350 |
| 1 x | 2 mm male connector (2 pcs) with safety connector |
| 1 x | Servo SAVOX SV-1260 MG |
| 1 x | Servo mounting frame SV-1260MG |
| 1 x | SAVOX SH 0254 servo |
| 2 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | SAVOX SH 1290 MG servo digi |
| 2 x | SE Ring HACKER 300 mm (2 pcs) |
| 1 x | Foil for sticking flaps and ailerons |
| 1 x | SE Ring 360 mm (2 pcs) |
| 2 x | SE Ring 250 mm (2 pcs) |
| 1 x | Cable grommet 9.5 mm (4 uds) |
| 1 x | Servo SAVOX SV-1261 MG |
| 1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
| 1 x | Cockpit latch closing I=10 mm |
| 1 x | Clip mini fixing for wing (2 pcs) |
| 1 x | 90 mm rods + T patellas set for direction control |
| 1 x | Control for forward wheel (MINI) |
| 1 x | Cable grommet Ø 6.4 mm (4 uds) |
| 1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
| 1 x | Servo SAVOX SW-1250 MG digi |
| 1 x | Steel Screw M1x8 (10 pcs) |
| 1 x | Baering 3x8x4 |
| 1 x | Wheel keeper washer |
| 1 x | Washer 2.2×4 |
| 1 x | Battery plate |
| 1 x | E_brakes electronics |
| 1 x | Me-163 |
| 1 x | AX-60 starters (5 pcs) |
| 1 x | DIVA cabin cruiser |
| 1 x | Yellow smoke bombs AX-60 (5 pcs) |
| 1 x | ABS 500 x 400 x 2,0 mm (white) |
| 1 x | Glow Plug Clip 1.3 Ah |
| 1 x | Indoor hinge with servo arm integraded |
| 1 x | Flap hinge 33x9 mm (6 pcs) |
| 1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | Soldering tip for KAVAN soldering iron KAV66.8338 |
| 1 x | Dean "T" - Futaba Adapter |
| 1 x | 2 piece mounting frame |
| 1 x | Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC |
| 2 x | Extension for LC-Display 50cm |
| 1 x | 1 m servo "Premium" wire (white/red/blue) |
| 1 x | Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC |
| 1 x | Sealing Iron Profi LCD |
| 1 x | Screwdriver for Torx® TX6 |
| 1 x | Ball Link Plier |
| 2 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Propeller drill jig DA 100/85/120/150/200 and VM 60-210 |
| 1 x | 22 mm Cut Disc Proxxon/Dremmel |
| 1 x | Fresa corte diamante Ø 2.35mm (flame) |
| 1 x | Disposable Injector Bags (30x16cm) 100 pcs |
| 1 x | 2,0x50 mm allen screwdriver |
| 1 x | 55% silver electrodes (2 pcs) |
| 1 x | Head runner |
| 1 x | Head spacer |
| 1 x | Bearing housing |
| 1 x | Servo Fork |
| 1 x | Steering lever |
| 1 x | Head lower part |
| 1 x | Rotor Mast |
| 1 x | FOAM - CURE™ (24g) |
| 1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | SE Ring 240 mm (2 pcs) |
| 1 x | USB HLS prog. interface |
| 1 x | METEOR 1.000 mm kit |
| 1 x | Avanti S, Cockpit sunCover (SebART) |
| 1 x | Castrol Oil A747 1l |
| 1 x | Heat Seal Iron |
| 1 x | Mini Infrared Thermomiter |
| 1 x | Glases Nimbus "Black" |
| 1 x | Tool for entel |
| 1 x | Reguladro ACTROCON 60A |
| 1 x | 12 mm dogdrive props |
| 1 x | Pegamento Pu R 50g polyuretano |
| 1 x | Heat-conducting adhesive (2x2ml), WLK DK 4 |
| 1 x | UHU hart 35 g |
| 1 x | SE Ring 330 mm (4 pcs) |
| 1 x | Tape GFK 25 mm |
| 1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
| 1 x | |
| 1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
| 1 x | Cinta Goldfix 1m |
| 1 x | RUDDOG Protection and Heat Shield Tape (2mx50mm) |
| 1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
| 1 x | Ring 320 mm length (5 pcs) |
| 1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
| 1 x | SE Ring 350 mm (2 pcs) |
| 1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
| 1 x | Fundas para el transporte F3A alas |
| 1 x | KatanaS 30E WHITE Landing Gear(SebART) |
| 1 x | BETA 1400 ARF Red |
| 1 x | Sukhoi 29S - 2.2 m, Yellow motor cowl (SebART) |
| 1 x | Katana 30, Decal set (Sebart) |
| 1 x | Oils Pumps Empty (1 liter) |
| 1 x | Light semi-synthetic Oil PUTOLINE TT (1l) |
| 2 x | Foam plastic plates (310x210x2 mm) |
| 2 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 2 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
| 1 x | Foam plastic plates (310x210x3 mm) |
| 1 x | Adapter lead MPX/EC3 |
| 1 x | Conector JR Servo female (50 pcs) |
| 1 x | Extension for SensorSwitch 60cm |
| 1 x | Smoke Oil Blue 5 l |
| 1 x | PowerBUS to BUS |
| 1 x | SensorSwitch, red connector wit 200cm ribbon cable |
| 1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
| 1 x | Spinner propeller pleg. 30 mm/5,0 mm/0º |
| 1 x | Spinner propeller pleg. 36 mm / 6,0 mm |
| 1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
| 1 x | Spinner propeller pleg. 40 mm / 3,0 mm |
| 1 x | Spinner propeller pleg. 40 mm / 3,2 mm |
| 1 x | Glass fabric 25 g/m² (1 m²) |
| 1 x | Fiberglass plate 350x150x0.3 mm |
| 1 x | ABS 500 x 400 x 0,5 mm (white) |
| 1 x | Chopped glass fibre strands 3 mm |
| 1 x | Styrene plate 320x120x0.5 mm |
| 1 x | Foam plastic plates (310x210x5 mm) |
| 1 x | Glass fibre sleeve Ø 20 mm |
 |
| 12,983.86EUR |
