| 1 x | Jet Pipe for ASPIRE 2m JMF |
| 1 x | Jet Pipe 160N-250N (120/130 mm) |
| 1 x | Tailormade cone A-10 Skymaster |
| 1 x | 30 cm BEC cable (male) |
| 1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs) |
| 1 x | Extension 100 cm (Futaba) |
| 3 x | Strip 3,5x1,75x330 mm |
| 1 x | Strip 2,5x1,25x330 mm |
| 2 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 2 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | Balsa panel 1.5x100x1000 mm |
| 1 x | 1/7 Pilot "Japanese" |
| 2 x | ABS Strip 1.5x6.0x1000 mm |
| 2 x | Stainless steel cable Ø 0.62 mm (10 m) |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | Extension silicon 30 cm female (Futaba) |
| 2 x | Fast'n EZ-CA-Hinge (12 uds) |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 2 x | ABS Strip 1.0x4.0x1000 mm |
| 1 x | Screw-lock connector M2 (2 uds) |
| 1 x | ABS Strip 1.0x5.0x1000 mm |
| 1 x | Pilot "Duke" Legends Series (Slimline) |
| 2 x | Adjustable brass horn threaded M3 |
| 1 x | Carbon fiber rod 1.0 mm x 1000 mm |
| 1 x | Mixers smoke bombs AX-60 (5 pcs) |
| 1 x | AX-60 starters (5 pcs) |
| 1 x | Yellow smoke bombs AX-60 (5 pcs) |
| 1 x | Cable coupler M2 (10 uds) |
| 2 x | Horn 6/20 with M3 Bearing |
| 1 x | Carbon fiber flat 1000x3.0x0.13 mm |
| 2 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
| 1 x | Wing tips support for AX-18/AX-60 (2 pcs) |
| 1 x | Green smoke canister 65 g |
| 1 x | Carbon fiber rod 6.0 mmx1000 mm |
| 1 x | Kwik link AL M4 con Clip (2 pcs) |
| 1 x | Initior Receiver FRX2 Wireless |
| 3 x | Xplorer1 anemometro |
| 1 x | Oracover Azul 2 m |
| 1 x | 1,6x1000 mm 2:1 black termoretract tube |
| 2 x | 12,7x1000 mm 2:1 green termoretract tube |
| 1 x | 6,4x1000 mm 2:1 blue termoretract tube |
| 1 x | 12.7 mm 2:1 black termoretract tube |
| 1 x | PIX Hawk with accesories |
| 1 x | MYLAR film A350 (1000x500 mm) |
| 1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
| 1 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
| 2 x | 1804 2400KV Brushless Motor Qav 250 mini |
| 1 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
| 1 x | 19 mm 2:1 black termoretract tube |
| 1 x | 30 cm BEC cable (female) |
| 1 x | Retract undercarriage for gliders 3-7 Kg 3.8-4.3 (without wheel) |
| 1 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
| 1 x | 2 mm male connector (2 pcs) with safety connector |
| 1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
| 1 x | Release film 100 cm x 50 m |
| 1 x | Stainless steel cable Ø 1.3 mm (10 m) |
| 1 x | Tip wing protector 28x10x12 (2 pcs) |
| 1 x | Wheel collar 3.5 mm Ø (4 uds) |
| 1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
| 1 x | Styrene plate 320x120x1.0 mm |
| 1 x | Round flex hinge (12 uds) |
| 1 x | Panel Honeycom carbon 350x150x3.5mm |
| 1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
| 1 x | Wing bolts M3 Steel screw blue (2 pcs) |
| 1 x | Straightened rod Ø 4.0 mm x 1000 mm |
| 1 x | Indoor hinge with servo arm integraded |
| 2 x | ABS Strip 1.0x3.0x1000 mm |
| 1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 1 x | Gates hinge aluminium (1 pcs) |
| 2 x | Round Rod 4,0x1000 mm |
| 1 x | Futaba BLS255/272/471SV - Gear Set |
| 2 x | ABS Strip 1.5x4.0x1000 mm |
| 2 x | Double aluminium servo arm V1-Futaba 2,5 inch M3 (red) |
| 1 x | Blue aluminium servo arm V3-Hitec 1,25inch M3 |
| 1 x | Blue aluminium servo arm V3-Hitec 1,5inch M3 |
| 1 x | Red aluminium servo arm V2-Futaba 1,0" inch M3 |
| 1 x | Cable with accesories |
| 1 x | Gold aluminium double servo arm V3-JR 3.5 inch M3 |
| 1 x | Xplorer3 anemometro |
| 1 x | Gold aluminium servo arm V2-JR 1,25" inch M3 |
| 1 x | Cable control set |
| 1 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
| 1 x | Blue aluminium servo arm V2-Hitec 1,75" inch M3 |
| 1 x | 6 mm red aluminium threaded horn with patella |
| 1 x | Horn F3A de Titanium 16 mm (2 units) |
| 1 x | Support Flush MPX Conector (6 pcs) |
| 1 x | Tapa estado carga XT-60 (6 pcs) |
| 1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
| 1 x | Wheel collar 4 mm Ø (4 uds) |
| 1 x | Stainless steel cable Ø 0.5 mm (2 m) |
| 1 x | Steering arm 16 mm Ø 4 mm |
| 1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
| 1 x | Sheet Depron Aero 1250x800x3 mm |
| 1 x | Stainless steel cable Ø 0.5 mm (10 m) |
| 1 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | Wheel collar 2 mm Ø (4 uds) |
| 1 x | Teflon rollers 40 mm x 15 mm Diam. |
| 1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
| 1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
| 1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
| 1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
| 2 x | Strip ABS 2.0x10.0x1000 mm |
| 1 x | Miniature brass strap hinge, 1 m |
| 2 x | Micro flex hinge (12 uds) |
| 1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 1 x | 15 mm reinforced hinge |
| 1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 2 x | Strip 2,0x2,0x330 mm |
| 2 x | ABS I Strip 20x10x1000 mm |
| 1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 2 x | ABS Strip 1.0x2.0x1000 mm |
| 2 x | ABS Strip 1.5x3.0x1000 mm |
| 2 x | Round Rod 1,5x1000 mm |
| 1 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 2 x | Strip ABS 2.0x8.0x1000 mm |
| 1 x | Round Rod 1,25x1000 mm |
| 1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 2 x | Round Rod 3,0x1000 mm |
| 1 x | 25 mm reinforced hinge |
| 2 x | ABS Strip 1.5x8.0x1000 mm |
| 1 x | Round Rod 2,5x1000 mm |
| 1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
| 1 x | Round Rod 5,0x1000 mm |
| 2 x | ABS I Strip 10x5x1000 mm |
| 1 x | Gates hinge 30x16 mm (2 pcs) |
| 1 x | 18 mm reinforced hinge |
| 1 x | Gates hinge |
| 1 x | Gates hinge black 30x16 mm (2 pcs) |
| 2 x | Strip 1,5x1,5x330 mm |
| 1 x | Long pinned hinge (6 uds) |
| 1 x | Round Rod 2,0x1000 mm |
| 1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 1 x | Pin hinge 26x11 mm (10 uds) |
| 1 x | Strip ABS 2.0x3.0x1000 mm |
| 2 x | Round Rod 1,0x1000 mm |
| 1 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | Large flex hinge (12 uds) |
| 1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 1 x | Futaba BLS152 - Upper Case |
| 1 x | Futaba S9650/9670SV - Upper Case |
| 1 x | Servo FUTABA BLS172 SV |
| 1 x | Servo FUTABA BLS 276SV |
| 1 x | Futaba S3010 Servo - Standard BB 0.16s/6.5kg |
| 2 x | ABS Strip 1.5x2.0x1000 mm |
| 2 x | Servo FUTABA S 9670 SV |
| 1 x | SERVO S9177SV HV S-Bus2 Programable |
| 1 x | Futaba 3010 - Gear Set |
| 1 x | Strip ABS 2.0x5.0x1000 mm |
| 1 x | Servo FUTABA S 3071 HV S-Bus |
| 1 x | Servo FUTABA SBL 471 SV |
| 1 x | Red aluminium servo arm V2-Futaba 17 mm iM2 |
| 1 x | Horn mando small (2 pcs) |
| 1 x | Blue aluminium servo arm V2-Hitec 1,5 inch M3 |
| 1 x | Red aluminium servo arm V1-Futaba 17 mm M2 |
| 1 x | Horn 5/20 with M2 Bearing |
| 1 x | Brass control horn M2 large for wire (2pcs) |
| 1 x | Extra long horn 60x30 |
| 1 x | Horn mando long (2 pcs) |
| 1 x | Xplorer4 anemometro |
| 1 x | Blue aluminium double servo arm V3-Hitec 3,5inch |
| 1 x | Horn DUBRO 1/2A |
| 1 x | Brass control horn M4 long for wire (4 pcs) |
| 1 x | Extra-long adjustable aluminium control horn 2,8x34 |
| 1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
| 1 x | Brass control horn M4 short for wire (10pcs) |
| 1 x | Gold aluminium double servo arm JR/Graupner 40 mm M3 F3A |
| 1 x | 6 mm M3 variable inclined horn |
| 1 x | Blue aluminium servo arm V3-Hitec 1,0inch M3 |
| 1 x | 6 mm blue aluminium threaded horn with patella |
| 1 x | Horn 20x28,5 mm (2 pcs) |
| 1 x | Gold aluminium servo arm V2-JR 1,5" inch M3 |
| 2 x | Double aluminium servo arm V1-Hitec 2,5 inch M3 (blue) |
| 1 x | Red aluminium double servo arm FUTABA 40 mm M3 F3A |
| 1 x | Horn micro type4 Ø 0,5 (2 pcs) |
| 1 x | 20 mm carbon horn |
| 1 x | Red aluminium servo arm V1-Futaba 15 mm iM2 |
| 1 x | Blue aluminium servo arm V2-Hitec 2,0 inch M3 |
| 1 x | Red aluminium servo arm V2-Futaba 1,25" inch M3 |
| 1 x | Control horn long w/ball |
| 1 x | 5 mm M2 variable horn |
| 1 x | Brass control horn M3 short for wire (2 pcs) |
| 1 x | Red aluminium servo arm V1-Futaba 1,5" inch M3 |
| 1 x | Horn 5/15 with M2 Bearing |
| 2 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
| 1 x | Blue aluminium servo arm V1-Hitec 20 mm M2 |
| 1 x | aluminium servo arm V1-JR 1,0 inch M2 |
| 1 x | Horn 6/27 with M3 Bearing |
| 1 x | 6 mm M3 variable horn |
| 1 x | aluminium servo arm V2-JR 2,0 inch M3 |
| 1 x | Horn for flap control (1 pcs) |
| 1 x | Blue aluminium double servo arm HITEC 40 mm M3 F3A |
| 1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
| 1 x | Red aluminium servo arm V1-Futaba 20 mm M2 |
| 1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
| 1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
| 1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
| 1 x | Brass control horn M2 short for wire (2 pcs) |
| 1 x | Horn 6/35 with M3 Bearing |
| 1 x | 5 mm M2 variable inclined horn |
| 1 x | Brass control horn M4 short for wire (4 pcs) |
| 1 x | Horn 13,5x16 mm (2 pcs) |
| 1 x | Brass control horn M2 long for wire (10pcs) |
| 1 x | Horn DU-BRO 1/2 (2 pcs) |
| 1 x | Aro pasacable Ø20 mm (4 pcs) |
| 1 x | ORACOVER Fluor red (2 m) |
| 1 x | Oratex Antik 2m |
| 1 x | PVC termo-retract battery 45 mm transparent orange (1 m) |
| 1 x | PVC blue transparent battery termo-retract 95 mm (1 m) |
| 1 x | ORACOVER transparent Yellow (10 m) |
| 1 x | Oratex White 2m |
| 1 x | Oracover Yellow CUB 2 m |
| 1 x | ABS tube 18.0x16.0x1000 mm |
| 1 x | PVC transparent battery termo-retract 195 mm (1 m) |
| 1 x | Ply-Span 450x600/13g Red |
| 1 x | 1,2x1000 mm 2:1 black termoretract tube |
| 1 x | Oracover Yellow CADMIO 2 m |
| 1 x | Oratex Red Fokker 10 m |
| 1 x | PVC transparent black termo-retract battery 185 mm (1 m) |
| 1 x | Ply-Span 450x600/13g Blue |
| 1 x | Ply-Span 450x600/13g White |
| 1 x | 6,4x1000 mm 2:1 red termoretract tube |
| 1 x | PVC yellow transparent battery termo-retract 68 mm (1 m) |
| 1 x | Oracover Black 2 m |
| 1 x | EXTRA NG 74" yello/blue/red (Skywing RC) |
| 1 x | Oracover Orange 2 m |
| 1 x | PVC transparent battery termo-retract 51 mm (1 m) |
| 1 x | PVC yellow transparent battery termo-retract 69 mm (10 m) |
| 1 x | PVC blue transparent battery termo-retract 68 mm (10 m) |
| 1 x | CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9) |
| 1 x | PVC yellow battery termo-retract 69 mm (10 m) |
| 1 x | Glases Ace |
| 1 x | Retract undercarriage |
| 1 x | Straightened rod Ø 0.8 mm x 1000 mm |
| 1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
| 1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
| 1 x | ABS tube 5.0x4.0x1000 mm |
| 1 x | ABS tube 3.0x2.0x330 mm |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
| 1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
| 1 x | Horn 16,5x20 mm (2 pcs) |
| 1 x | Glases Innovation Plus |
| 1 x | SIG Coverall 1.2x1.8 m |
| 1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
| 1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
| 1 x | Focke Wulf FW-190A-8 93" (2362 mm) |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | F4U CORSAIR 2360 mm |
| 1 x | F-16 Scale 1:6 (1.630mm) |
| 1 x | ODYSSEY Horns Set GFK |
| 1 x | ABS 500 x 400 x 1,5 mm (white) |
| 1 x | DPSI RV Mini 5 (2008) |
| 1 x | Futaba 17 mm servo arm with ball link HITEC |
| 2 x | Servo Mount M (blue) |
| 1 x | Futaba 46 mm servo arm with ball link |
| 1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
| 1 x | Cockpit latch closing I=10 mm |
| 1 x | Cockpit aluminium closing 5.4g |
| 1 x | Long pinned hinge (12 uds) |
| 1 x | Programador FUTABA USB CIU-3 |
| 1 x | Servo FUTABA BLS 272SV |
| 1 x | Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re |
| 1 x | Actuator Electric 25 mm |
| 1 x | Rudder 2_Tray 4.5~5 inch |
| 1 x | Red aluminium servo arm V3-Futaba 3-3,5inch |
| 1 x | Wheel 115 mm with electromagnet and brake disk + E-Brake (2 uds) |
| 1 x | Electric Landing Gear "Black Edition" BULL Mo1 2.6 (Elektron Re |
| 1 x | Rudder forward 70x28 "type Kato" |
| 1 x | Red aluminium servo arm V2-Futaba 1,75" inch M3 |
| 1 x | RS-200 Touch Programmer |
| 1 x | |
| 1 x | Motor Mount for Multiplex FunJet |
| 1 x | Frontal support Speed 280 |
| 1 x | AXI 2820/12 V2 |
| 1 x | Bearings for motor HACKER C50 |
| 1 x | 2020 motor power ring |
 |
| 17,850.39EUR |
