| 2 x | ARAMID honeycomb 1300x2600x2 mm |
| 2 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
| 2 x | ABS 500 x 400 x 1 mm (white) |
| 3 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
| 1 x | Carbon fibre sandwich sheet 350x150x3 mm |
| 1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
| 2 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
| 2 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
| 1 x | Aluminium sheet 500x250x0,5mm |
| 2 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
| 2 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
| 1 x | Buy Perforated film 100 cm / 20 m |
| 3 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
| 1 x | ABS 500 x 400 x 0,5 mm (white) |
| 2 x | ABS 500 x 400 x 2,0 mm (white) |
| 1 x | Buy Perforated film 100 cm / 10 m |
| 1 x | Buy Perforated film 100 cm / 50 m |
| 1 x | Motor A2212/13T |
| 2 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 2 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
| 1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
| 3 x | Gates hinge 30x16 mm (2 pcs) |
| 2 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
| 1 x | Nylon hinge 20x15x0,3 (10 pcs) |
| 2 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
| 3 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
| 2 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
| 3 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
| 4 x | Fast'n EZ-CA-Hinge (12 uds) |
| 1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
| 2 x | Gates hinge |
| 2 x | Long pinned hinge (6 uds) |
| 2 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
| 2 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
| 1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
| 2 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
| 2 x | 15 mm reinforced hinge |
| 3 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
| 4 x | Flap hinge 33x9 mm (6 pcs) |
| 4 x | Large flex hinge (12 uds) |
| 1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
| 1 x | Fibra carbono 3k tela 160g/m2 100 cm x 5m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs) |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 25 m |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
| 2 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 1 x | Carbon roving DowAksa / 24k / 1600 tex |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
| 1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
| 2 x | ABS tube 18.0x16.0x1000 mm |
| 1 x | ABS tube 9.0x7.0x1000 mm |
| 2 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
| 1 x | ABS tube 5.0x4.0x156 mm |
| 2 x | ABS tube 3.0x1.0x1000 mm |
| 1 x | ABS tube 14.0x10.0x1000 mm |
| 1 x | ABS tube 7.0x6.0x1000 mm |
| 2 x | ABS tube 10.0x8.0x1000 mm |
| 2 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
| 1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
| 1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
| 2 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
| 1 x | ABS tube 9.0x8.0x1000 mm |
| 1 x | ABS tube 5.0x4.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
| 2 x | ABS tube 8.0x6.0x1000 mm |
| 1 x | ABS tube 3.0x2.0x330 mm |
| 1 x | ABS tube 20.0x18.0x1000 mm |
| 1 x | ABS tube 2.0x1.0x1000 mm |
| 1 x | ABS tube 4.0x2.0x1000 mm |
| 2 x | ABS tube 8.0x7.0x1000 mm |
| 1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 1 x | Carbon fiber flat 1000x3.0x0.5 mm |
| 1 x | 15 mm floating pad (30 pcs) |
| 1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Horn 5/10 with M2 Bearing |
| 2 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 2 x | Medium pin type hinge (12 uds) |
| 2 x | Small flex hinge (12 uds) |
| 1 x | 18 mm reinforced hinge |
| 2 x | ROBART POINT HINGE 4,7mm (5 pcs) |
| 3 x | Small pinned hinge (12 uds) |
| 2 x | Support Filtro FESTO |
| 3 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
| 2 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
| 1 x | Support FUEL DOT V3 |
| 4 x | Nylon hinge for flaps 33x9 (2 pcs) |
| 1 x | Long pinned hinge (12 uds) |
| 1 x | Gates hinge aluminium (1 pcs) |
| 1 x | Glow Plug Clip 1.3 Ah |
| 1 x | Motor OS 3820-1200 electric |
| 1 x | ABS tube 6.0x4.0x1000 mm |
| 1 x | 100 Newtons FEMA absorber |
| 1 x | Starter 12v (Max 180 and 30ccm) |
| 1 x | Baseplate servo |
| 1 x | Bateria LRP 2200-7.2v 6 cell NiMH |
| 1 x | Wheel FEMA 70 mm / 5 mm |
| 1 x | Wheel FEMA 178 mm / 8 mm |
| 1 x | Wheel FEMA 140 mm / 6 mm |
| 1 x | Super Light Wheels(Sponge Tyre) Ø 50mm x 19mm (2pcs) axis Ø 3.5m |
| 1 x | Wheel 38 mm V2 |
| 1 x | Nose wheel 62 mm |
| 2 x | Nylon hinge 20x20x0,3 (10 pcs) |
| 1 x | Super Light Wheels(Sponge Tyre) Ø 55mm x 19mm (2pcs) axis Ø 3.5m |
| 1 x | Wheel 115 mm with electromagnet and brake disk (2 uds) |
| 1 x | Super Light Wheels(Sponge Tyre) Ø 60mm x 21mm (2pcs) axis Ø 4.0m |
| 1 x | 60x25 mm tail wheel "type F3A" |
| 1 x | 89x32 mm (3.5") axle Ø5 mm aluminium core wheel |
| 1 x | Electronic fog horn |
| 1 x | Race Outboard MERCURY type A |
| 1 x | Robbe Modellsport ROOKIE 35 ESC FOR BRUSH MO TORS |
| 1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
| 1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
| 2 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
| 1 x | Motor ACTRO 50-2-760 |
| 1 x | Motor RACE 720 Navy 12v |
| 1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | RX external cable for estandar receivers |
| 2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
| 1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
| 1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
| 2 x | ABS tube 12.0x10.0x1000 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
| 1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm) |
| 1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
| 1 x | ABS tube 16.0x14.0x1000 mm |
| 1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
| 1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
| 1 x | PowerBox PROFESSIONAL |
| 1 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
| 1 x | Safetyclip MPX (6 pcs) |
| 1 x | 25 mm reinforced hinge |
| 2 x | Round flex hinge (12 uds) |
| 1 x | Pin type hinge Al 6x98 mm (2 pcs) |
| 2 x | Small pinned hinge (6 uds) |
| 1 x | Micro flex hinge (12 uds) |
| 1 x | Support pump Xicoy X45 |
| 1 x | Support Flush MPX Conector (6 pcs) |
| 1 x | Support conector MPX (6 pcs) |
| 1 x | Support XT60 conector (2 pcs) |
| 1 x | Support Pitot JETI |
| 1 x | Soporte grifo FESTO (2 pcs) |
| 2 x | Pin hinge 26x11 mm (10 uds) |
| 1 x | Gates hinge black 30x16 mm (2 pcs) |
| 1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
| 1 x | Miniature brass strap hinge, 1 m |
| 1 x | Nylon hinge 15x0,3 (10 pcs) |
| 1 x | Pin hinge 39x20 mm (10 uds) |
| 1 x | Indoor hinge with servo arm integraded |
| 1 x | Robart Door Hinge (Pk2) |
| 1 x | Flap hinge (6 pcs) |
| 1 x | Powerset FunJet 2 with Vectorcontrol unit |
| 1 x | NoNa BB wheel Ø130x40mm in pair |
| 1 x | Metal ring front FEMA |
| 1 x | Restrictor FESTO 3/3 mm |
| 1 x | 63x20 mm (2.5") axle Ø5 Type jets mm aluminium core wheel |
| 1 x | Propeller MENZ-S 17x8 |
| 1 x | Propeller MENZ-S 15x8 |
| 1 x | Propeller MENZ-S 21x10 |
| 2 x | Glass fibre sleeve Ø 20 mm |
| 1 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
| 1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m |
| 1 x | Glass fibre sleeve Ø 20 mm X 10m |
| 1 x | Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m |
| 1 x | Futaba Multi-Switch-Prop 12+2 DECODER |
| 1 x | Futaba Multi-Switch 16 DECODER |
| 1 x | Futaba Prop Module F14 |
| 1 x | GPS, Vario and altitude Sensor SBS-01G |
| 1 x | Antena FUTABA R7108/7014/7114SB (1 pc) |
| 1 x | 4Wx2 Power Navigation Light, 13mm, T-Fuse White |
| 1 x | Avanti S Jet , Field folding model stand (SebArt) |
| 1 x | Hopper UAT Sebar 400 ml |
| 1 x | SunCover 2.2 Class (SebART) |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm) |
| 1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø10 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm) |
| 1 x | Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm) |
| 1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
| 1 x | Pine wood slat 2.0x2.0x1000 mm |
| 1 x | Support Antena 2.4 Ghz (2 pcs) |
| 1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
| 1 x | Plastic wheels 28 mm (2 pcs) |
| 1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
| 1 x | DUBRO - CUB WHEELS (1/3 SCALE) (558TLC) - 2PCS |
| 1 x | 69x25 mm (2.75") axle Ø4 mm aluminium core wheel |
| 1 x | Propeller MENZ-S 20x12 3 blades |
| 1 x | Propeller MENZ-S 20x8 |
| 1 x | Propeller MENZ-S 18x10 3-Blades |
| 1 x | Propeller MENZ-S 16x12 |
| 1 x | Propeller MENZ-S 20x8 Pusher |
| 1 x | Propeller MENZ-S 16x6 |
| 1 x | 43x14 mm hard foam KOVO wheel (2 pcs) |
| 1 x | 100x50 mm SLH KOVO wheel |
| 2 x | PVC plate 320 x 194 x 0.23 mm (brown) |
| 1 x | Fiberglass plate 350x150x1.0 mm |
| 1 x | Film release agent PVA 25 ml |
| 1 x | Styrene plate 320x120x0.5 mm |
 |
| 10,283.24EUR |
.jpg "Fiberglass 163 g/m² 1m x 10 m (Aero, finish FK 144, plain)")
