| 1 x | Straightened rod Ø 4.0 mm x 1000 mm |
| 1 x | Brass rod Ø 1.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 0.5 mm x 1000 mm |
| 2 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
| 1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
| 3 x | Straightened threaded rod M3 - 1m |
| 2 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
| 1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
| 1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M |
| 1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs) |
| 1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
| 1 x | ARAMID honeycomb 1300x2600x2 mm |
| 1 x | Carbon fibre sleeve 12k 170 mm x 5m |
| 1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
| 2 x | Vacuum bag, 1200 mm x 50 m |
| 1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
| 1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
| 1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m |
| 2 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
| 1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
| 1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
| 1 x | TopFuel LiPo 20C-ECO-X 5000mAh 6S |
| 1 x | Paramotor BackPack XXS (without accessories) |
| 1 x | Soporte filtro FESTO (4 pcs) |
| 1 x | A40 Backmountset complete |
| 2 x | Cable adapter iCharger |
| 2 x | A50 Backmountset complete V3/V4 |
| 1 x | Support conector MPX (6 pcs) |
| 1 x | DUPLEX 2,4EX Stick with Potentiometer for Transmitter DC/DS |
| 1 x | Soporte grifo FESTO (2 pcs) |
| 1 x | A50 Motor Mount Alu complete set |
| 1 x | Soporte grifo FESTO vertical (1 pcs) |
| 1 x | Aluminium Hub for folding Props 43 mm M8 Shaft 5 mm |
| 1 x | A50 Backmountset complete |
| 2 x | Lipo RO-POWER Ultra MAX 2300 mAh 14.8v 35c |
| 1 x | Battery LiFe TopFuel 3100 mAh 3s MTAG 30C |
| 1 x | Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm |
| 1 x | Support pump Xicoy X45 |
| 1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
| 1 x | A40-10S V2 8-Pole + 6,7:1 PG |
| 2 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
| 1 x | Support Pitot JETI |
| 1 x | A50 Backmountset complete |
| 1 x | Support Flush MPX Conector (6 pcs) |
| 1 x | Ball Bearings for motor A60-V2 |
| 1 x | Esc MasterBasic 90 Opto |
| 1 x | Screw-lock connector Ø 2 mm (2 uds) |
| 1 x | Lipo KAVAN 2200 mAh 11.1v 30/60C |
| 1 x | Lipo SMART 5000 mAh 4s 14.8v IC5 |
| 1 x | Battery LiPo GENS 5000 mAh 2S 7.4V 50C (Gens Ace Hard Case) |
| 1 x | Battery LiPo GENS 5000 mAh 4S 14.8v 45C (Gens Ace) |
| 1 x | Brass rod Ø 1.5 mm x 1000 mm |
| 1 x | Straightened rod Ø 14.0 mm x 1000 mm |
| 1 x | Straightened rod Ø 3.0 mm x 1000 mm |
| 1 x | Fiberglass plate 350x150x1.5 mm |
| 1 x | Fiberglass plate 350x150x3.0 mm |
| 2 x | Fiberglass plate 350x150x2.5 mm |
| 1 x | Fiberglass plate 350x150x1.0 mm |
| 1 x | Teflon rollers 80 mm x 15 mm Diam. |
| 1 x | Surprise XII Horizontal Estabilizer (Freudenthaler) |
| 2 x | Birch plywood plate 600x300x3.0 mm |
| 2 x | Pine wood slat 1.5x3.0x1000 mm |
| 2 x | Pine wood slat 2.0x2.0x1000 mm |
| 2 x | Birch plywood plate 600x300x2.0 mm |
| 2 x | Beech dowels 4.0 x 1000 mm |
| 1 x | BALSA trip 2.0x2.0x1000 mm |
| 1 x | BALSA trip 3.0x5.0x1000 mm |
| 1 x | A/C quality beech plywood 600x300x8.0 mm |
| 1 x | Balsa panel 6.0x100x1000 mm |
| 2 x | Balsa panel 1.5x100x1000 mm |
| 2 x | Balsa panel 4.0x100x1000 mm |
| 1 x | Sandwich carbon + poplar 2mm + carbon 290x160 mm |
| 1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
| 1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
| 2 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
| 1 x | Foam plastic plates (310x210x2 mm) |
| 1 x | Styrene plate 320x120x0.5 mm |
| 1 x | Fiberglass plate 350x150x2.0 mm |
| 1 x | Foam plastic plates (310x210x3 mm) |
| 1 x | Foam plastic plates (310x210x8 mm) |
| 1 x | Release film 100 cm x 50 m |
| 1 x | Battery LiPo GENS 2500 mAh 2S 7.4v 25C (Gens Ace) |
| 1 x | SAVOX SH 0254 servo |
| 1 x | TopFuel LiPo 20C-ECO-X 5800mAh 4S |
| 1 x | SAVOX SH 0255 MG servo |
| 1 x | SE Ring 360 mm (2 pcs) |
| 1 x | Q80-8M V2 |
| 1 x | TopFuel LiPo 20C-ECO-X 2400mAh 3S MTAG |
| 1 x | Battery charging cable XT60 |
| 1 x | Screwdriver for Hexagon 1,5mm |
| 1 x | 15x7 tree blades propeller LEFT |
| 1 x | TopFuel LiPo 20C-ECO-X 2400mAh 2S MTAG |
| 1 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
| 1 x | Backmountset complete A40 |
| 1 x | Support ECU Xicoy X-45 |
| 1 x | Aro pasacable Ø20 mm (4 pcs) |
| 1 x | Support FUEL DOT V3 |
| 1 x | Esc master MEZON 120 Lite |
| 2 x | LiPo KAVAN 3700 mAh 11.1v 40/80C |
| 1 x | Support pumb/filter Xicoy X45 |
| 1 x | EDF Stream-Fan 110mm kv780 |
| 1 x | Esc MasterBasic 40SB |
| 1 x | Propeller CFK 12.5x7 |
| 1 x | 29,0 mm propeller (left propeller) |
| 1 x | Propeller CFK 23x12 |
| 1 x | 11x7 tree blades propeller |
| 1 x | 2,3 mm Prop Adapter M6 |
| 1 x | Propeller CFK 17x18 |
| 1 x | 3 mm Prop Adapter M6 |
| 1 x | 10 mm Prop Adapter M12 |
| 1 x | 14 mm portholes (10 pcs) |
| 1 x | Propeller CFK 16x13 |
| 1 x | Propeller RF CFK 16x8,5 S |
| 1 x | Propeller CFK 16x16 Slim |
| 1 x | Carbon Non-Woven, 245 g/m² 125 cm x 20 m |
| 1 x | Sandwich Carbon fibre Rohacell (800 x 280 x 3 mm) |
| 1 x | Carbon plate 700x550x0.5 mm |
| 1 x | Fiberglass plate 620x540x0,2 mm |
| 2 x | Birch plywood plate 600x300x3.0 mm |
| 2 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | Liston HAYA 8 x 8 x 1000 mm |
| 1 x | Balsa panel 10x100x1000 mm |
| 1 x | BALSA triangular 8x8x1000 mm |
| 2 x | Lite Plywood panel 600x300x3.0 mm |
| 1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
| 1 x | Balsa panel 2.5x100x1000 mm |
| 1 x | Panel Honeycom carbon 350x150x3.5mm |
| 1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
| 1 x | Battery LiPo TATTU 450 mAh 4S 14,8V 75C |
| 2 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
| 1 x | Glass fabric 25 g (2 m²) |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
| 1 x | Carbon plate 550x350x1.5 mm ECOTECH |
| 1 x | Film release agent PVA 25 ml |
| 1 x | Styrene plate 320x120x1.0 mm |
| 1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m |
| 1 x | Propeller CFK 12.5x6.5 |
| 1 x | Mahogany wood slat 3.0x3.0x1000 mm |
| 1 x | Birch plywood plate 600x300x2.5 mm |
| 1 x | Beech dowels 3.0 x 1000 mm |
| 1 x | Pine wood slat 3.0x5.0x1000 mm |
| 2 x | Lite Plywood panel 600x300x2.0 mm |
| 1 x | Pine wood slat 10x10x1000 mm |
| 1 x | Walnut wood slat 2.0x2.0x1000 mm |
| 1 x | Pine wood slat 2.0x10.0x1000 mm |
| 1 x | Mahogany wood slat 1.5x1.5x1000 mm |
| 2 x | Birch plywood plate 600x300x2.0 mm |
| 1 x | Pine wood slat 3.0x7.0x1000 mm |
| 2 x | Birch plywood plate 600x300x1.5 mm |
| 1 x | Pine wood slat 6.0x6.0x1000 mm |
| 1 x | Liston HAYA 3 x 10 x 1000 mm |
| 2 x | Birch plywood plate 600x300x4.0 mm |
| 1 x | A/C quality beech plywood 600x300x1.5 mm |
| 1 x | Balsa panel 3.0x100x1000 mm |
| 1 x | Balsa panel 5.0x100x1000 mm |
| 1 x | A/C quality beech plywood 600x300x0.6 mm |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | quality beech plywood BIRCH 600x300x2.0 mm |
| 1 x | A/C economy plywood 600x300x6+.0 mm |
| 1 x | BALSA triangular 6x6x1000 mm |
| 1 x | A/C quality beech plywood 600x300x5.0 mm |
| 1 x | Balsa panel 1.0x100x1000 mm |
| 1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
| 1 x | Balsa panel 2.0x100x1000 mm |
| 1 x | A/C quality beech plywood 600x300x0.8 mm |
| 1 x | A/C quality beech plywood 1520x750x4.0 mm |
| 1 x | Balsa panel 8.0x100x1000 mm |
 |
| 8,305.67EUR |
