2 x | 50N turbine start protection tube |
3 x | Ring support P-20 OPUS V-Jet 60mm |
1 x | Set transmisions BULL Mo1 (dura/aluminium) |
1 x | HAWKER HUNTER 1:5,8 Desert (1.770mm) |
2 x | BOEING 727, Jet pipe for Boeing 727 |
1 x | Tank GFK Opus/JEt 300 ml |
1 x | Fuselage Bags JEEMO |
1 x | SkyMaxx 1.550 mm (kit) |
1 x | XICOY X45 rail |
1 x | Set stickers JEEMO "Andy" |
1 x | JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT |
1 x | Copier 5x20 cm pcs |
1 x | Ball link Aluminio M3 (2 pcs) |
1 x | Flat washer 2.2 mm (20 pcs) |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Long pinned hinge (12 uds) |
1 x | Lock washer 3.2 mm (20 pcs) |
1 x | Dust collector for mould cleaning |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Round Rod 2,0x1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
1 x | Glases Moritz |
2 x | Horn 5/10 with M2 Bearing |
1 x | Glases Aspen |
1 x | Flat washer 2.7 mm (20 uds)pcs) |
2 x | Straightened rod Ø 1.2 mm x 1500 mm |
1 x | |
1 x | Micro flex hinge (12 uds) |
1 x | CC 05 |
1 x | Cable with accesories |
1 x | Strip 2,5x1,25x330 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Flap hinge (6 pcs) |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | Ferrita 17x10x6.5 mm |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs) |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Cabling for Fox MDM1 wings |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | Horn 6/27 with M3 Bearing |
1 x | 3,0x60 mm allen screwdriver |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | BULL MØ1 2.600mm "RED BULL" |
1 x | BULL MØ1 2.600mm "ALPINE" |
1 x | Set transmisions ULTIMATUM 2.0 (stainless/aluminium) |
1 x | Set Stickers Ultimatum 2.0 - Andy Folienwelt |
2 x | Bags BULL Mo1 2.6m "Luxe" |
1 x | ULTIMATUM 2.0 m red/black |
1 x | Vest clothes Hispano Aviación |
1 x | BULL MØ1 2.600mm YELLOW |
1 x | ULTIMATUM 2.0 PRO "McLAren" |
2 x | Tank BULL MØ1 (3.2 L) + 1x (0.9 L) + 1x (0.9L Smoke) PRO |
1 x | 2 mm Prop Adapter M6 |
1 x | 2.3 mm Adapter for 30 mm spinners |
1 x | 25 mm fenders (10 pcs) |
1 x | 10x7 tree blades propeller |
1 x | 3.2 mm Prop Adapter M6 |
1 x | Shirt Hispano Aviación |
1 x | Quicklock washer 3 mm (10 pcs) |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Crimping tool |
1 x | BALSA triangular 8x8x1000 mm |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | BALSA triangular 10x10x1000 mm |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | Horn 6/20 with M3 Bearing |
1 x | 6 mm M3 variable inclined horn |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Buy Perforated film 100 cm / 10 m |
1 x | Connector Sub-D 2+5 Male |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Glases Flitemaster |
1 x | BALSA trip 3.0x5.0x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | Round Rod 6,0x1000 mm |
1 x | Quicklock washer 4 mm (10 pcs) |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs) |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | CC 02 |
2 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Angled clevis with threaded rod M3 |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
2 x | ABS Strip 1.5x2.0x1000 mm |
1 x | Buy Perforated film 100 cm / 50 m |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | Dremel PERMAGRIT 18 mm round lime |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Adjustable brass horn threaded M3 |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | Balsa panel 3.0x100x1000 mm |
1 x | Crimping tool |
1 x | M3 black washers (4 pcs) |
1 x | Vasa model Catapult |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Brass control horn M2 long for wire (10pcs) |
1 x | Ball Link Plier |
2 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | 25 mm reinforced hinge |
2 x | Balsa panel 4.0x100x1000 mm |
1 x | 4 LiPo XH>EH adapter |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | Glases Nimbus "Black" |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | BULL MØ1 2.600mm RED |
1 x | Canopy BULL MØ1 2.600mm |
1 x | 3,2 mm Prop Adapter M6 |
1 x | 28 mm turnbuckle |
1 x | 290 mm M4/4 mm Prop shaft |
1 x | Jodel D.9 BeBe 2.400 mm Kit |
1 x | Z type of cable coupler Ø 2 (2 uds) |
1 x | Couple M4 for wire (10 pcs) |
1 x | Horn mando long (2 pcs) |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | JETImodel SINGLE BEC |
1 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Spinner 3BL propeller pleg. 40 mm / 4,0 mm |
1 x | Spinner 3BL propeller pleg. 65 mm / 4,0 mm |
1 x | 45 mm black plastic spinner for fixed propeller |
1 x | 50 mm black plastic spinner for fixed propeller |
1 x | Boat 140 mm |
1 x | Cabestrante 13 x12 mm (5 pcs) |
1 x | Klumpblock (Plastik), Höhe 8 mm, 2 Rille, 20 Stück |
1 x | Bisagra de remo metal 28 mm de largo (2 pcs) |
1 x | ALU servo arm 90º 3 mm shaft |
1 x | Servo JETI DSHV 3D13T (13 Kg) |
1 x | Balsa panel 6.0x100x1000 mm |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
1 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | Micro Switch button |
1 x | Schul-Malpinsel Gr.5 |
1 x | PowerBox SparkSwitch RS |
1 x | Round Rod 4,0x1000 mm |
1 x | Glases Innovation Plus |
1 x | Electric Landing Gear "Black Edition" BULL Mo1 2.6 GS200 (Electr |
1 x | Cable coupler M3 (10 uds) |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | 4 mm M3 red control terminal (4 pcs) |
1 x | Cable coupler M3 (10 uds) |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | Flat washer 3.2 mm (20 pcs) |
1 x | Lock washer 4.3 mm (20 pcs) |
1 x | Brass control horn M4 long for wire (4 pcs) |
1 x | Glass fibre braided sleeve (45mm) roll 20m |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Peel ply 64 g/m² (plain weave) 150 cm x 20m |
1 x | Cable control set |
1 x | Glass fabric 80 g/m² (twill) 100 cm x 50m |
1 x | Horn with ball 40x30 |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
|
38,020.82EUR |